Question 1

How do I revise City & Guilds NPTC Level 2 Award in Branch Removal and Crown Breakdown using a Chainsaw for City & Guilds Limited Occupational Qualification?

Accepted Answer

Verbalize your actions throughout the assessment – state what you are checking, why you are cutting in a certain way, and how you are managing risk; this demonstrates underpinning knowledge even if a cut is not perfect.

Question 2

What exam tips are there for City & Guilds NPTC Level 2 Award in Branch Removal and Crown Breakdown using a Chainsaw? (2)

Accepted Answer

Before each cut, pause to identify compression and tension forces; explain to the assessor which part of the guide bar you will use and why, showing deep understanding of wood loading.

Question 3

What exam tips are there for City & Guilds NPTC Level 2 Award in Branch Removal and Crown Breakdown using a Chainsaw? (3)

Accepted Answer

Always start with a 360-degree site walk and a ‘tree risk’ narrative, ticking off each hazard like utilities, uneven ground, and escape routes; this establishes methodical working from the outset.

Question 4

What mistakes should I avoid in City & Guilds NPTC Level 2 Award in Branch Removal and Crown Breakdown using a Chainsaw?

Accepted Answer

Learners often cut too deeply on the tension side of a branch, causing the saw to become trapped or the branch to split and tear bark from the main trunk.

Question 5

What are common errors in City & Guilds NPTC Level 2 Award in Branch Removal and Crown Breakdown using a Chainsaw exams? (2)

Accepted Answer

A frequent oversight is failing to check that the chain brake is engaged when moving between cuts or repositioning, which leads to automatic failure in assessment.