City & Guilds
Level 3
QN: 500/4739/5
Curriculum Active
City & Guilds Level 3 Award in Advanced Welding Skills
Official qualification regulated by Ofqual, awarded by City & Guilds. Classified as a Vocationally-Related Qualification. Total guided learning hours: 810 hours.
Qualification Level
Level 3
Awarding Body
City & Guilds
Syllabus Units
9 Units
Guided Hours
810 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Flux Corted Arc Welding
Verified
Key Learning Objectives:
- Produce a single-vee butt weld from one side of a joint in the PA flat position
- Produce a single-vee butt weld from one side of a joint in the PF vertical-upwards position
- Produce a tee fillet weld in the on one side of a joint PF vertical-upwards position
- Produce a tee fillet weld in the on one side of a joint in the PD horizontal/overhead position
- Produce a single-vee butt weld from one side of the joint in the PE overhead position
- Know the Process and Health & Safety requirements for Flux Cored Arc (MMA) Welding.
2
Manual Metal Arc Welding _Pipe_
Verified
Key Learning Objectives:
- Produce a single-vee pipe butt weld in the PA flat-rotated (ASME 1G) position
- Produce a single-vee pipe butt weld in the PC horizontal (ASME 2G) position
- Produce a single-vee pipe butt weld in the PF vertical-upwards (ASME 5G) position
- Produce a pipe tee fillet weld in the PF vertical-upwards (ASME 5F) position
- Produce a single-vee pipe butt weld in the H-LO45 inclined (ASME 6G) position
- Know the Process and Health & Safety requirements for Manual Metal Arc (MMA) welding.
3
Manual Metal Arc Welding _Plate_
Verified
Key Learning Objectives:
- Produce a single-vee butt weld from one side of a joint in the PC horizontal position
- Produce a tee fillet weld on one side of the joint in the PD horizontal/overhead position
- Produce a corner weld from one side of the joint in the PE overhead position
- Produce a tee fillet weld on one side of the joint in the PE overhead position
- Produce a single-vee butt weld from one side of the joint in the PE overhead position
- Know the Process and Health & Safety requirements for Manual Metal Arc (MMA) Welding.
4
Metal Inert Gas Welding _Pipe_
Verified
Key Learning Objectives:
- Produce a single-vee pipe butt weld in the PA flat-rotated (ASME 1G) position
- Produce a single-vee pipe butt weld in the PC horizontal (ASME 2G) position
- Produce a single-vee pipe butt weld in the PF vertical-upwards (ASME 5G) position
- Produce a pipe tee fillet weld in the PF vertical-upwards (ASME 5F) position
- Produce a single-vee pipe butt weld in the H-LO45 inclined (ASME 6G) position
- Know the Process and Health & Safety requirements for Metal Inert Gas (MIG) Welding.
5
Metal Inert Gas Welding _Plate_
Verified
Key Learning Objectives:
- Produce a single-vee butt weld from one side of a joint in the PC horizontal position
- Produce a tee fillet weld on one side of the joint in the PD horizontal/overhead position
- Produce a corner weld from one side of the joint in the PE overhead position
- Produce a tee fillet weld on one side of the joint in the PE overhead position
- Produce a single-vee butt weld from one side of the joint in the PE overhead position
- Know the Process and Health & Safety requirements for Metal Inert Gas (MIG) Welding.
6
Oxy-Acetylene Welding
Verified
Key Learning Objectives:
- Produce a butt weld from one side of a joint in the PF vertical-upwards position
- Produce a tee fillet weld on one side of a joint in the PF vertical-upwards position
- Produce a lap fillet weld on one side of a joint in the PD horizontal/overhead position
- Produce a corner weld from one side of a joint in the PE overhead position
- Produce a butt weld from one side of a joint in the PE overhead position
- Know the Process and Health & Safety requirements for Oxy-Acetylene Welding.
7
Tungsten Inert Gas Welding _Aluminium_
Verified
Key Learning Objectives:
- Produce a butt weld from one side of a joint in the PF vertical position (aluminium)
- Produce a butt weld from one side of a joint in the PC horizontal position (aluminium)
- Produce a tee fillet weld on one side of a joint in the PD horizontal/overhead position (aluminium)
- Produce a corner weld from one side of the joint in the PB horizontal/vertical position (aluminium)
- Produce a tube-to-sheet tee fillet weld in the PF vertical-upwards position (aluminium)
- Know the Process and Health & Safety requirements for Tungsten Inert Gas Welding.
8
Tungsten Inert Gas Welding _Pipe_
Verified
Key Learning Objectives:
- Produce a single-vee pipe butt weld in the PA flat-rotated (ASME 1G) position.
- Produce a single-vee pipe butt weld in the PC horizontal (ASME 2G) position
- Produce a single-vee pipe butt weld in the PF vertical-upwards (ASME 5G) position
- Produce a pipe tee fillet weld in the PF vertical-upwards (ASME 5F) position
- Produce a single-vee pipe butt weld in the H-LO45 inclined (ASME 6G)position
- Know the Process and Health & Safety requirements for Tungsten Inert Gas Welding.
9
Tungsten Inert Gas Welding _Sheet_
Verified
Key Learning Objectives:
- Produce a butt weld from one side of a joint in the PC horizontal position
- Produce a tee fillet weld on one side of the joint in the PD horizontal/overhead position
- Produce a corner weld from one side of the joint in the PE overhead position
- Produce a tee fillet weld on one side of the joint in the PE overhead position
- Produce a butt weld from one side of a joint in the PE overhead position
- Know the Process and Health & Safety requirements for Tungsten Inert Gas Welding.
Regulatory & Verification Details
- Qualification Number (QN)
- 500/4739/5
- Regulated Status
- Available to learners
- Awarding Body
- City & Guilds
- Qualification Type
- Vocationally-Related Qualification
- Operational Start
- Oct 2008