EAL
Level 1
QN: 601/5659/4
Curriculum Active
EAL Level 1 Diploma In Engineering Technologies
Official qualification regulated by Ofqual, awarded by EAL. Classified as a Vocationally-Related Qualification. Total guided learning hours: 1040 hours.
Qualification Level
Level 1
Awarding Body
EAL
Syllabus Units
26 Units
Guided Hours
1040 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Introduction to Additive Manufacturing - 3D Printing
Verified
Key Learning Objectives:
- Know the principles and applications of 3D printing technology.
- Know the preventive maintenance operations to be performed to maintain the 3D printer in a useable condition.
- Be able to prepare 3D printing technology.
- Be able to use 3D printing technology.
- Be able to complete using 3D printing technology.
2
Introduction to Automated Technologies
Verified
Key Learning Objectives:
- Know functionality of pneumatic components
- Be able to prepare for pneumatic activities
- Be able to carry out pneumatic activities
- Be able to check Pneumatic Activities are carried out correctly
3
Introduction to Basic Mathematics and Science Used in Engineering
Verified
Key Learning Objectives:
- Know how mathematics is applied in solving engineering problems
- Know how science is applied in solving engineering problems
4
Introduction to brazing and soldering
Verified
Key Learning Objectives:
- Know the process requirements for brazing and soldering.
- Be able to produce beads on plate in the flat (PA) position.
- Be able to produce a lap fillet joint on plate in the horizontal/vertical (PB) position.
- Be able to produce a tee fillet joint on plate in the flat (PA) position.
- Be able to produce a tee fillet joint on plate in the horizontal/vertical (PB) position.
5
Introduction to Computer Aided Drawing - CAD
Verified
Key Learning Objectives:
- Know the advantages, disadvantages and applications of CAD
- Be able to produce a simple CAD drawing in 2D and 3D
- Be able to save and store CAD data files correctly
- Be able to output CAD data to peripheral devices
6
Introduction to Computer Aided Machining - CAM
Verified
Key Learning Objectives:
- Know the advantages, disadvantages and applications of CAM
- Know simple general and machining codes
- Be able to create and modify a simple CAM programme
- Be able to demonstrate how to machine components using CAM
7
Introduction to computer maintenance
Verified
Key Learning Objectives:
- Know how to work safely with computers
- Know the necessary input and output devices to build a PC
- Be able to demonstrate how to upgrade and test the hardware components of a computer system
- Be able to demonstrate how to upgrade and test the operating system and install device drivers
8
Introduction to Cutting, Forming and Assembling Engineering Materials
Verified
Key Learning Objectives:
- Know the different cutting, forming and assembling processes
- Be able to prepare for cutting, forming and assembling activities
- Be able to carry out cutting, forming and assembling activities
- Be able to check cutting, forming and assembling activities are carried out correctly
9
Introduction to Cutting, Forming and Assembly of Pipework Materials
Verified
Key Learning Objectives:
- Know the basic types of domestic plumbing pipe
- work and fittings.
- Know how to joint and bend basic types of domestic plumbing pipe
- Be able to follow Health and Safety procedures to carry out basic common plumbing processes.
- Be able to joint and bend basic types of domestic plumbing pipe
10
Introduction to Cutting, Jointing and Finishing Wood
Verified
Key Learning Objectives:
- Know how to identify different types of wood
- Be able to identify and check hand tools
- Be able to carry out jointing and assembling of wood activities
- Be able to carry out wood finishing techniques
11
Introduction to Cycle Maintenance
Verified
Key Learning Objectives:
- Know how to identify different types of cycles
- Know the regulations applicable to the use of cycles on public highways
- Be able to carry out basic cycle maintenance
- Be able to check that basic cycle maintenance is carried out correctly
12
Introduction to Electrical Installation
Verified
Key Learning Objectives:
- Know how to carry out basic electrical work
- Be able to carry out basic electrical work
- Be able to carry out testing on de-energised circuits
13
Introduction to Electronics
Verified
Key Learning Objectives:
- Know the purpose and use of fundamental electronic components
- Know how to prepare to produce a fundamental electronic printed circuit board
- Be able to prepare to assemble a fundamental electronic circuit board
- Be able to carry out the assembling of a fundamental electronic circuit board
- Know how to use digital test equipment for measurement and testing of electronic components and circuits
- Be able to use digital test equipment for measurement and testing of electronic components and circuit to ensure correct function, To be able to complete the task
14
Introduction to Engineering Project Planning
Verified
Key Learning Objectives:
- Know how to prepare for a project
- Be able to produce a project plan
- Be able to monitor a project plan
- Be able to review a project
15
Introduction to Joining Engineering Materials
Verified
Key Learning Objectives:
- Know the different joining processes
- Be able to prepare for joining activities
- Be able to carry out joining activities
- Be able to check joining activities are carried out correctly
16
Introduction to Machining Engineering Materials
Verified
Key Learning Objectives:
- Know different machining methods
- Be able to prepare for machining activities
- Be able to carry out machining activities
- Be able to identify that machining activities are carried out correctly
17
Introduction to Manual Metal Arc Welding
Verified
Key Learning Objectives:
- Know the process and health & safety requirements for Manual Metal Arc (MMA) welding
- Be able to produce beads on plate in the PA flat position
- Be able to produce a lap fillet weld in the PB horizontal/vertical position
- Be able to produce a tee fillet weld in the PA flat position
- Be able to produce a corner weld in the PA flat position
18
Introduction to Mechanical and Electrical Maintenance
Verified
Key Learning Objectives:
- Know maintenance techniques
- Know the function of bearings and seals
- Know electric motor construction
- Be able to Identify, dismantle and check a simple electric motor
19
Introduction to Metal Inert Gas Welding MIG/MAG
Verified
Key Learning Objectives:
- Know the process and Health & Safety requirements for Metal Inert Gas (MIG/MAG) welding
- Be able to produce beads on plate in the PA flat position
- Be able to produce a lap fillet weld in the PB horizontal/vertical position
- Be able to produce a tee fillet weld in the PA flat position
- Be able to produce a corner weld in the PA flat position
20
Introduction to Motor Vehicle Maintenance
Verified
Key Learning Objectives:
- Know different Motor Vehicle Types
- Be able to carry out service activities on brakes and tyres, Check and Adjust Lubricant Levels
- Be able to check lighting systems are working correctly
21
Introduction to Motorcycle Maintenance
Verified
Key Learning Objectives:
- Know different motorcycle types
- Be able to carry out service activities on brakes and tyres
- Be able to check and adjust fluid levels
- Be able to check lighting systems are working correctly
22
Introduction to Oxy-Acetylene Welding
Verified
Key Learning Objectives:
- Know the process and health & safety requirements for oxy-acetylene welding
- Be able to produce beads on plate in the PA flat position
- Be able to produce a lap fillet weld in the PB horizontal/vertical position
- Be able to produce a brazed tee fillet joint in the PA flat position
- Be able to produce a corner weld in the PA flat position
23
Introduction to thermal cutting techniques
Verified
Key Learning Objectives:
- Know the process requirements for thermal and plasma cutting.
- Be able to produce straight line cuts on plate in the flat (PA) position.
- Be able to produce radial line cuts on plate in the flat (PA) position.
- Be able to produce annular disc on plate the flat (PA) position.
- Be able to produce a rectangular cut-out on plate in the horizontal (PC) and vertical down (PG) positions.
24
Introduction to Tungsten Inert Gas Welding
Verified
Key Learning Objectives:
- Know the process and health & safety requirements for tungsten inert gas (TIG) welding
- Be able to produce beads on plate in the PA flat position
- Be able to produce a lap fillet weld in the PB horizontal/vertical position
- Be able to produce a tee fillet weld in the PA flat position
- Be able to produce a corner weld in the PA flat position
25
Introduction to working in engineering
Verified
Key Learning Objectives:
- Know how to work safely in an engineering environment
- Know how to communicate effectively in engineering
- Know how to use engineering hand tools safely
- Know how to identify materials and components used in engineering
26
Introduction to Working with Customers
Verified
Key Learning Objectives:
- Know the importance of making a good impression
- Know how to provide and maintain a good service
- Know how to deal with customers’ problems
Regulatory & Verification Details
- Qualification Number (QN)
- 601/5659/4
- Regulated Status
- Available to learners
- Awarding Body
- EAL
- Qualification Type
- Vocationally-Related Qualification
- Operational Start
- Mar 2015