EAL
Level 2
QN: 610/4629/2
Curriculum Active
EAL Level 2 Diploma in Industrial Coatings (Development Competence)
Official qualification regulated by Ofqual, awarded by EAL. Classified as a Occupational Qualification. Total guided learning hours: 1911 hours.
Qualification Level
Level 2
Awarding Body
EAL
Syllabus Units
17 Units
Guided Hours
1911 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Applying finishes by hard anodising
Verified
Key Learning Objectives:
- Applying finishes by hard anodising
2
Applying hot dip treatments
Verified
Key Learning Objectives:
- Applying hot dip treatments
3
Applying liquid coatings by dipping
Verified
Key Learning Objectives:
- Applying liquid coatings by dipping
4
Applying liquid coatings by spray methods
Verified
Key Learning Objectives:
- Applying liquid coatings by spray methods
5
Applying powder coatings
Verified
Key Learning Objectives:
- Applying powder coatings
6
Applying surface finishes to composite moulds
Verified
Key Learning Objectives:
- Applying surface finishes to composite moulds
7
Carrying out chromic acid anodising operations
Verified
Key Learning Objectives:
- Carrying out chromic acid anodising operations
8
Carrying out finishing by conversion coating methods
Verified
Key Learning Objectives:
- Carrying out finishing by conversion coating methods
9
Carrying out mechanical polishing
Verified
Key Learning Objectives:
- Carrying out mechanical polishing
10
Carrying out sulphuric acid anodising operations
Verified
Key Learning Objectives:
- Carrying out sulphuric acid anodising operations
11
Carrying out tartaric sulphuric acid anodising operations
Verified
Key Learning Objectives:
- Carrying out tartaric sulphuric acid anodising operations
12
Carrying out zinc plating operations
Verified
Key Learning Objectives:
- Carrying out zinc plating operations
13
Carrying out zinc‐rich coating operations
Verified
Key Learning Objectives:
- Carrying out zinc-rich coating operations
14
Complying with statutory regulations and organisational safety requirements
Verified
Key Learning Objectives:
- Complying with statutory regulations and organisational safety requirements
15
Fettling substrates
Verified
Key Learning Objectives:
- Fettling substrates
16
Using and communicating technical information
Verified
Key Learning Objectives:
- Using and communicating technical information
17
Working efficiently and effectively in engineering
Verified
Key Learning Objectives:
- Working efficiently and effectively in engineering
Regulatory & Verification Details
- Qualification Number (QN)
- 610/4629/2
- Regulated Status
- Available to learners
- Awarding Body
- EAL
- Qualification Type
- Occupational Qualification
- Operational Start
- Sept 2024