EAL
Level 3
QN: 603/2621/9
Curriculum Active
EAL Level 3 Diploma in Advanced Manufacturing and Engineering - Fabricator (Development Competence)
Official qualification regulated by Ofqual, awarded by EAL. Classified as a Occupational Qualification. Total guided learning hours: 21033 hours.
Qualification Level
Level 3
Awarding Body
EAL
Syllabus Units
38 Units
Guided Hours
21033 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Bending and forming plate using press brakes or bending machines
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives Confirm that the equipment is set up correctly and is ready for useManipulate the machine controls safely and correctly in line with operational procedures
- Produce formed components to the required specification
- Carry out quality sampling checks at suitable intervalsDeal promptly and effectively with problems within their control and report those that cannot be solvedShut down the equipment to a safe condition on conclusion of the machining activities
2
Bonding engineering materials using adhesives
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant bonding procedure specification and job instructionsCheck that the materials to be bonded and bonding agents comply with the specificationCorrectly prepare the parent materials and bonding agents in line with the bonding specification
- Carry out the bonding operations using the specified processes and techniques to position and bond the materials in their correct locations
- Ensure that any equipment used to maintain surface contact during the bonding activities is set up and used correctlyAchieve bonds of the required quality and within the specified dimensional accuracyDeal promptly and effectively with problems within their control and report those that cannot be solved
3
Cutting and shaping materials using portable thermal cutting equipment
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives Confirm that the machine is set up and ready for the machining activities to be carried outManipulate the machine tool controls safely and correctly in line with operational procedures
- Produce cut components to the required quality and within the specified dimensional accuracy
- Carry out quality sampling checks at suitable intervalsDeal promptly and effectively with problems within their control and report those that cannot be solvedShut down the equipment to a safe condition on conclusion of the machining activities
4
Cutting materials using saws and abrasive discs
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectivesConfirm that the machine is set up and ready for the machining activities to be carried out Manipulate the machine tool controls safely and correctly in line with operational procedures
- Produce cut components to the required quality and within the specified dimensional accuracy
- Carry out quality sampling checks at suitable intervalsDeal promptly and effectively with problems within their control and report those that cannot be solvedShut down the equipment to a safe condition on conclusion of the machining activities
5
Cutting plate and sections using shearing machines
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives Confirm that the machine is set up and ready for the machining activities to be carried outManipulate the machine tool controls safely and correctly in line with operational procedures
- Produce cut components to the required quality and within the specified dimensional accuracy
- Carry out quality sampling checks at suitable intervalsDeal promptly and effectively with problems within their control and report those that cannot be solvedShut down the equipment to a safe condition on conclusion of the machining activities
6
Cutting sheetmetal to shape using hand and machine tools
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
7
Developing and marking out templates for metalwork
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives Obtain and use the correct information for marking outObtain the appropriate marking out equipment and check that it is in a usable condition
- Prepare suitable datums and marking out surfaces
- Develop templates that comply with quality and accuracy standardsMark out using appropriate methodsCheck that the marking out complies with the specificationDeal promptly and effectively with problems within their control and report those that cannot be resolved
8
Forming platework using power rolling machines
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives Confirm that the equipment is set up correctly and is ready for useManipulate the machine controls safely and correctly in line with operational procedures
- Produce formed components to the required specification
- Carry out quality sampling checks at suitable intervalsDeal promptly and effectively with problems within their control and report those that cannot be solvedShut down the equipment to a safe condition on conclusion of the machining activities
9
Forming sheetmetal using hand and machine tools
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the correct component drawing and any other related specifications for the component to be produced
- Determine what has to be done and how this will be achieved
- Use the appropriate tools and equipment for the pressure shaping operations and check that they are in a safe and usable conditionShape the materials to the required specification using appropriate methods and techniquesCheck that all the required shaping operations have been completed to the required standardDeal promptly and effectively with problems within their control and report those that cannot be solved
10
Heat treating materials for fabrication activities
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Ensure the materials to be processed are suitably prepared for the processing operations to be carried outCheck and monitor that the processing equipment is set up and maintained at satisfactory operating conditions throughout the processing operations
- Carry out the process in accordance with operating procedures and the workpiece specification requirements
- Ensure that the processed workpiece achieves the required characteristics and meets the processing specificationDeal promptly and effectively with problems within their control and report those that they cannot solveDispose of waste and excess materials in line with agreed organisational proceduresShut down the processing equipment to a safe condition on completion of the processing activities
11
Joining fabricated components using mechanical fasteners
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant instructions, assembly drawings and any other specifications
- Ensure that the specified components are available and that they are in a usable condition
- Use the appropriate methods and techniques to assemble the components in their correct positionsSecure the components using the specified connectors and securing devicesCheck the completed assembly to ensure that all operations have been completed and the finished assembly meets the required specificationDeal promptly and effectively with problems within their control and report those that cannot be solved
12
Joining materials by resistance spot welding
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and work instructions Confirm that the machine is set up and operating correctly, ready for the joining operations to be carried outCheck that the parent material, components, consumables and joint preparation comply with specifications
- Carry out and monitor the machine operations in accordance with specifications and job instructionsAchieve joints of the required quality and specified dimensional accuracyMake sure that the rate of output is as specifiedDeal promptly and effectively with problems within their control and report those that they cannot solveShut down the equipment to a safe condition on conclusion of the joining activities
13
Joining materials using brazing machines
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and work instructions Confirm that the machine is set up and operating correctly, ready for the joining operations to be carried outCheck that the parent material, components, consumables and joint preparation comply with specifications
- Carry out and monitor the machine operations in accordance with specifications and job instructionsAchieve joints of the required quality and specified dimensional accuracyMake sure that the rate of output is as specifiedDeal promptly and effectively with problems within their control and report those that they cannot solveShut down the equipment to a safe condition on conclusion of the joining activities
14
Marking out components for metalwork
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives Obtain and use the correct information for marking outObtain the appropriate marking out equipment and check that it is in a usable condition
- Prepare suitable datums and marking out surfaces
- Produce marked out components using appropriate methodsCheck that the marking out complies with the specification
- Complete relevant paper
- work in accordance with organisational requirementsDeal promptly and effectively with problems within their control and report those that cannot be resolved
15
Operating CNC fabrication equipment
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives Confirm that the equipment is set up and ready for operation
- Follow the defined procedures for starting and running the operating systemDeal promptly and effectively with error messages or equipment faults that are within their control and report those that cannot be solved
- Monitor the computer process and ensure that the production output is to the required specificationShut down the equipment to a safe condition on conclusion of the activities
16
Preparing brazing machines for production
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure specification and job instructions for the work to be producedCheck that the equipment is as specified and in usable conditionObtain the required components and check that the joint preparation complies with the specificationSet up the handling
- work-holding and associated equipment to achieve correct joint positioning
- Select and prepare the appropriate consumables in line with the joining procedure specificationSet and adjust the machine operating conditions to achieve joints of the required quality and within specified dimensional accuracyCheck that all safety mechanisms are in place and that the equipment is operating satisfactorilyDeal promptly and effectively with problems within their control and report those that cannot be solved
17
Preparing electron beam welding machines for production
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure specification and job instructions for the work to be producedCheck that the equipment is as specified and in usable conditionObtain the required components and check that the joint preparation complies with the specificationSet up the handling
- work-holding and associated equipment to achieve correct joint positioning
- Select and prepare the appropriate consumables in line with the joining procedure specificationSet and adjust the machine operating conditions to achieve joints of the required quality and within specified dimensional accuracyCheck that all safety mechanisms are in place and that the equipment is operating satisfactorilyDeal promptly and effectively with problems within their control and report those that cannot be solved
18
Preparing friction welding machines for production
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure specification and job instructions for the work to be producedCheck that the equipment is as specified and in usable conditionObtain the required components and check that the joint preparation complies with the specificationSet up the handling
- work-holding and associated equipment to achieve correct joint positioning
- Select and prepare the appropriate consumables in line with the joining procedure specificationSet and adjust the machine operating conditions to achieve joints of the required quality and within specified dimensional accuracyCheck that all safety mechanisms are in place and that the equipment is operating satisfactorilyDeal promptly and effectively with problems within their control and report those that cannot be solved
19
Preparing laser welding machines for production
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure specification and job instructions for the work to be producedCheck that the equipment is as specified and in usable conditionObtain the required components and check that the joint preparation complies with the specificationSet up the handling
- work-holding and associated equipment to achieve correct joint positioning
- Select and prepare the appropriate consumables in line with the joining procedure specificationSet and adjust the machine operating conditions to achieve joints of the required quality and within specified dimensional accuracyCheck that all safety mechanisms are in place and that the equipment is operating satisfactorilyDeal promptly and effectively with problems within their control and report those that cannot be solved
20
Preparing mechanised arc welding equipment for production
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure specification and job instructions for the work to be producedCheck that the equipment is as specified and in usable conditionObtain the required components and check that the joint preparation complies with the specificationSet up the handling
- work-holding and associated equipment to achieve correct joint positioning
- Select and prepare the appropriate consumables in line with the joining procedure specificationSet and adjust the machine operating conditions to achieve joints of the required quality and within specified dimensional accuracyCheck that all safety mechanisms are in place and that the equipment is operating satisfactorilyDeal promptly and effectively with problems within their control and report those that cannot be solved
21
Preparing resistance spot, seam and projection welding machines for production
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure specification and job instructions for the work to be producedCheck that the equipment is as specified and in usable conditionObtain the required components and check that the joint preparation complies with the specificationSet up the handling
- work-holding and associated equipment to achieve correct joint positioning
- Select and prepare the appropriate consumables in line with the joining procedure specificationSet and adjust the machine operating conditions to achieve joints of the required quality and within specified dimensional accuracyCheck that all safety mechanisms are in place and that the equipment is operating satisfactorilyDeal promptly and effectively with problems within their control and report those that cannot be solved
22
Producing and finishing holes using drilling machines
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives Confirm that the machine is set up and ready for the machining activities to be carried outManipulate the machine tool controls safely and correctly in line with operational procedures
- Produce drilled components to the required quality and within the specified dimensional accuracy
- Carry out quality sampling checks at suitable intervalsDeal promptly and effectively with problems within their control and report those that cannot be solvedShut down the equipment to a safe condition on conclusion of the machining activities
23
Producing fillet welded joints using a manual welding process
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and job instructionsCheck that the joint preparation complies with the specificationCheck that joining and related equipment and consumables are as specified and fit for purpose
- Produce joints as specified using the appropriate thermal joining technique
- Produce joints of the required quality and of specified dimensional accuracyShut down the equipment to a safe condition on completion of joining activitiesDeal promptly with excess and waste materials and temporary attachments, in line with approved and agreed proceduresDeal promptly and effectively with problems within their control and report those that cannot be solved
24
Producing platework assemblies
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant instructions, assembly drawings and any other specifications
- Ensure that the specified components are available and that they are in a usable condition
- Use the appropriate methods and techniques to assemble the components in their correct positionsSecure the components using the specified connectors and securing devices
- Produce finished plate
- work assembliesCheck the completed assembly to ensure that all operations have been completed and the finished assembly meets the required specificationDeal promptly and effectively with problems within their control and report those that cannot be solved
25
Producing platework components and assemblies
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Plan the plate working activities before they start themObtain the appropriate tools and equipment for the plate working operations, and check that they are in a safe and usable conditionMark out the components for the required operations, using appropriate tools and techniquesCut and shape the materials to the required specification, using appropriate tools and techniquesP7 Use the appropriate methods and techniques to assemble and secure the components in their correct positions
- Measure and check that all dimensional and geometrical aspects of the components are to the specificationDeal promptly and effectively with problems within their control, and seek help and guidance from the relevant people if they have problems that they cannot resolve
- Leave the work area in a safe and tidy condition on completion of the plate
- work activities
26
Producing sheetmetal assemblies
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant instructions, assembly drawings and any other specifications
- Ensure that the specified components are available and that they are in a usable condition
- Use the appropriate methods and techniques to assemble the components in their correct positionsSecure the components using the specified connectors and securing devicesCheck the completed assembly to ensure that all operations have been completed and the finished assembly meets the required specificationDeal promptly and effectively with problems within their control and report those that cannot be solved
27
Slinging, lifting and moving materials and components
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives Position the moving equipment so that the weight of the load is evenly distributedAttach the appropriate handling equipment securely to the load, using approved methods to eliminate slippageConfirm that the load is secure before movingMove the load over the selected, suitable routePosition and release the load safely in its intended final location
28
Welding materials by the manual metal arc process
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and job instructionsCheck that the joint preparation complies with the specificationCheck that joining and related equipment and consumables are as specified and fit for purposeMake the joints as specified using the appropriate thermal joining technique
- Produce welded joints of the required quality and of specified dimensional accuracy
29
Welding materials by the manual oxy/fuel gas welding process
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and job instructionsCheck that the joint preparation complies with the specificationCheck that joining and related equipment and consumables are as specified and fit for purpose
- Produce joints as specified using the appropriate thermal joining technique
- Produce joints of the required quality and of specified dimensional accuracyShut down the equipment to a safe condition on completion of joining activitiesDeal promptly with excess and waste materials and temporary attachments, in line with approved and agreed proceduresDeal promptly and effectively with problems within their control and report those that cannot be solved
30
Welding materials by the manual TIG and plasma arc welding process
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety and other relevant regulations, directives and guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and job instructionsCheck that the joint preparation complies with the specificationCheck that joining and related equipment and consumables are as specified and fit for purpose
- Produce joints as specified using the appropriate thermal joining technique
- Produce joints of the required quality and of specified dimensional accuracyShut down the equipment to a safe condition on completion of joining activitiesDeal promptly with excess and waste materials and temporary attachments, in line with approved and agreed proceduresDeal promptly and effectively with problems within their control and report those that cannot be solved
31
Welding materials by the semi-automatic MIG/MAG and flux cored arc processes
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and job instructionsCheck that the joint preparation complies with the specificationCheck that joining and related equipment and consumables are as specified and fit for purposeMake the joints as specified using the appropriate thermal joining technique
- Produce welded joints of the required quality and of specified dimensional accuracyShut down the equipment to a safe condition on completion of joining activitiesDeal promptly with excess and waste materials and temporary attachments, in line with approved and agreed proceduresDeal promptly and effectively with problems within their control and report those that cannot be solved
32
Welding materials using electron beam welding machines
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and work instructionsConfirm that the machine is set up and operating correctly, ready for the joining operations to be carried outCheck that the parent material, components, consumables and joint preparation comply with specifications
- Carry out and monitor the machine operations in accordance with specifications and job instructionsAchieve joints of the required quality and specified dimensional accuracyMake sure that the rate of output is as specifiedDeal promptly and effectively with problems within their control and report those that they cannot solveShut down the equipment to a safe condition on conclusion of the joining activities
33
Welding materials using friction welding machines
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and work instructionsConfirm that the machine is set up and operating correctly, ready for the joining operations to be carried outCheck that the parent material, components, consumables and joint preparation comply with specifications
- Carry out and monitor the machine operations in accordance with specifications and job instructionsAchieve joints of the required quality and specified dimensional accuracyMake sure that the rate of output is as specifiedDeal promptly and effectively with problems within their control and report those that they cannot solveShut down the equipment to a safe condition on conclusion of the joining activities
34
Welding materials using laser welding machines
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and work instructionsConfirm that the machine is set up and operating correctly, ready for the joining operations to be carried outCheck that the parent material, components, consumables and joint preparation comply with specifications
- Carry out and monitor the machine operations in accordance with specifications and job instructionsAchieve joints of the required quality and specified dimensional accuracyMake sure that the rate of output is as specifiedDeal promptly and effectively with problems within their control and report those that they cannot solveShut down the equipment to a safe condition on conclusion of the joining activities
35
Welding materials using resistance spot, seam and projection welding machines
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and work instructionsConfirm that the machine is set up and operating correctly, ready for the joining operations to be carried outCheck that the parent material, components, consumables and joint preparation comply with specifications
- Carry out and monitor the machine operations in accordance with specifications and job instructionsAchieve joints of the required quality and specified dimensional accuracyMake sure that the rate of output is as specifiedDeal promptly and effectively with problems within their control and report those that they cannot solveShut down the equipment to a safe condition on conclusion of the joining activities
36
Welding materials with mechanised arc welding equipment
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and work instructionsConfirm that the machine is set up and operating correctly, ready for the joining operations to be carried outCheck that the parent material, components, consumables and joint preparation comply with specifications
- Carry out and monitor the machine operations in accordance with specifications and job instructionsAchieve joints of the required quality and specified dimensional accuracyMake sure that the rate of output is as specifiedDeal promptly and effectively with problems within their control and report those that they cannot solveShut down the equipment to a safe condition on conclusion of the joining activities
37
Welding pipe/tube using multiple manual arc welding processes
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and job instructionsCheck that the joint preparation complies with the specificationCheck that joining and related equipment and consumables are as specified and fit for purpose
- Produce joints as specified using the appropriate thermal joining technique
- Produce joints of the required quality and of specified dimensional accuracyShut down the equipment to a safe condition on completion of joining activitiesDeal promptly with excess and waste materials and temporary attachments, in line with approved and agreed proceduresDeal promptly and effectively with problems within your control and report those that cannot be solved
38
Welding plate using multiple manual arc welding processes
Verified
Key Learning Objectives:
- Work safely at all times, complying with health and safety legislation, regulations, directives and other relevant guidelines
- Demonstrate the required occupational behaviours in line with the job role and company objectives
- Follow the relevant joining procedure and job instructionsCheck that the joint preparation complies with the specificationCheck that joining and related equipment and consumables are as specified and fit for purpose
- Produce joints as specified using the appropriate thermal joining technique
- Produce joints of the required quality and of specified dimensional accuracyShut down the equipment to a safe condition on completion of joining activitiesDeal promptly with excess and waste materials and temporary attachments, in line with approved and agreed proceduresDeal promptly and effectively with problems within their control and report those that cannot be solved
Regulatory & Verification Details
- Qualification Number (QN)
- 603/2621/9
- Regulated Status
- Available to learners
- Awarding Body
- EAL
- Qualification Type
- Occupational Qualification
- Operational Start
- Dec 2017