EAL
    Level 3
    QN: 600/1784/3
    Curriculum Active

    EAL Level 3 NVQ Extended Diploma in Automotive Engineering

    Official qualification regulated by Ofqual, awarded by EAL. Classified as a Occupational Qualification. Total guided learning hours: 15062 hours.

    Qualification Level
    Level 3
    Awarding Body
    EAL
    Syllabus Units
    165 Units
    Guided Hours
    15062 hrs
    Instant access to interactive lessons, quizzes, and spaced revision.

    Course Syllabus & Study Modules

    Complete breakdown of verified curriculum topics and learning objectives.

    1

    Applying Finishes to Motorsport Composite Mouldings

    Verified
    Key Learning Objectives:
    • Apply finishes to motorsport composite mouldings
    • Know how to apply finishes to motorsport composite mouldings
    2

    Applying Finishes to Vehicle Composite Mouldings

    Verified
    Key Learning Objectives:
    • Apply finishes to vehicle composite mouldings
    • Know how to apply finishes to vehicle composite mouldings
    3

    Assembling and Disassembling Electrical and Electronic Equipment on Experimental Vehicles

    Verified
    Key Learning Objectives:
    • Assemble and disassemble electrical and electronic equipment on experimental vehicles
    • Know how to assemble and disassemble electrical and electronic equipment on experimental vehicles
    4

    Assembling and Disassembling Mechanical Equipment on Experimental Vehicles

    Verified
    Key Learning Objectives:
    • Assemble and disassemble mechanical equipment on experimental vehicles
    • Know how to assemble and disassemble mechanical equipment on experimental vehicles
    5

    Assembling and Fitting Wiring Looms to Vehicles

    Verified
    Key Learning Objectives:
    • Assemble and fit wiring looms to vehicles
    • Know how to assemble and fit wiring looms to vehicles
    6

    Assembling and testing electronic circuits

    Verified
    Key Learning Objectives:
    • Assemble and test electronic circuits
    • Know how to assemble and test electronic circuits
    7

    Assembling and testing fluid power systems

    Verified
    Key Learning Objectives:
    • Assemble and test fluid power systems
    • Know how to assemble and test fluid power systems
    8

    Assembling Body Sub-Assemblies to Produce a Vehicle

    Verified
    Key Learning Objectives:
    • Assemble body sub-assemblies to produce a vehicle
    • Know how to assemble body sub-assemblies to produce a vehicle
    9

    Assembling Braking Systems to Vehicles

    Verified
    Key Learning Objectives:
    • Assemble braking systems to vehicles
    • Know how to assemble braking systems to vehicles
    10

    Assembling Commercial and Passenger Carrying Vehicle Body Sub-Assemblies to Produce a Vehicle

    Verified
    Key Learning Objectives:
    • Assemble commercial and passenger carrying vehicle body sub-assemblies to produce a vehicle
    • Know how to assemble commercial and passenger carrying vehicle body sub-assemblies to produce a vehicle
    11

    Assembling Components for Commercial and Passenger Carrying Vehicles by Resistance Spot Welding

    Verified
    Key Learning Objectives:
    • Assemble components for commercial and passenger carrying vehicles by resistance spot welding
    • Know how to assemble components for commercial and passenger carrying vehicles by resistance spot welding
    12

    Assembling Components for Experimental Vehicle Engineering by Manual Torch Brazing and Soldering

    Verified
    Key Learning Objectives:
    • Assemble components for experimental vehicle engineering by manual torch brazing and soldering
    • Know how to assemble components for experimental vehicle engineering by manual torch brazing and soldering
    13

    Assembling Components for Experimental Vehicle Engineering by Resistance Spot Welding

    Verified
    Key Learning Objectives:
    • Assemble components for experimental vehicle engineering by resistance spot welding
    • Know how to assemble components for experimental vehicle engineering by resistance spot welding
    14

    Assembling Composite Vehicle Components

    Verified
    Key Learning Objectives:
    • Assemble composite vehicle components
    • Know how to assemble composite vehicle components
    15

    Assembling Electrical and Electronic Equipment to Vehicles

    Verified
    Key Learning Objectives:
    • Assemble electrical and electronic equipment to vehicles
    • Know how to assemble electrical and electronic equipment to vehicles
    16

    Assembling pattern, model and engineering woodwork components

    Verified
    Key Learning Objectives:
    • Assemble pattern, model and engineering wood
    • work components
    • Know how to assemble pattern, model and engineering wood
    17

    Assembling Power Plant Units

    Verified
    Key Learning Objectives:
    • Assemble power plant units
    • Know how to assemble power plant units
    18

    Assembling Structural Sub Assemblies to Produce a Public Service Vehicle

    Verified
    Key Learning Objectives:
    • Assemble Structural Sub Assemblies to Produce a Public Service Vehicle
    • Know how to Assemble Structural Sub Assemblies to Produce a Public Service Vehicle
    19

    Assembling Structures for Experimental Vehicle Engineering using a Manual Welding Process

    Verified
    Key Learning Objectives:
    • Assemble structures for experimental vehicle engineering using a manual welding process
    • Know how to assemble structures for experimental vehicle engineering using a manual welding process
    20

    Assembling Structures for Experimental Vehicle Engineering using Mechanical Fasteners

    Verified
    Key Learning Objectives:
    • Assemble structures for experimental vehicle engineering using mechanical fasteners
    • Know how to assemble structures for experimental vehicle engineering using mechanical fasteners
    21

    Assembling Sub-Assembly Units to Vehicles

    Verified
    Key Learning Objectives:
    • Assemble sub-assembly units to vehicles
    • Know how to assemble sub-assembly units to vehicles
    22

    Assembling the Front Suspension Sub-Assembly

    Verified
    Key Learning Objectives:
    • Assemble the front suspension sub-assembly
    • Know how to assemble the front suspension sub-assembly
    23

    Assembling the Rear Axle Sub-Assembly

    Verified
    Key Learning Objectives:
    • Assemble the rear axle sub-assembly
    • Know how to assemble the rear axle sub-assembly
    24

    Assembling Trim Components to Vehicles

    Verified
    Key Learning Objectives:
    • Assemble trim components to vehicles
    • Know how to assemble trim components to vehicles
    25

    Assembling Vehicle Body Sub-Assemblies

    Verified
    Key Learning Objectives:
    • Assemble vehicle body sub-assemblies
    • Know how to assemble vehicle body sub-assemblies
    26

    Assembling, wiring and testing electrical panels/components mounted in enclosures

    Verified
    Key Learning Objectives:
    • Assemble, wire and test electrical panels/components mounted in enclosures
    • Know how to assemble, wire and test electrical panels/components mounted in enclosures
    27

    Bonding Motorsport Composite Mouldings

    Verified
    Key Learning Objectives:
    • Bond motorsport composite mouldings
    • Know how to bond motorsport composite mouldings
    28

    Bonding Vehicle Composite Components

    Verified
    Key Learning Objectives:
    • Bond vehicle composite components
    • Know how to bond vehicle composite components
    29

    Building Prototype Engines for Test

    Verified
    Key Learning Objectives:
    • Build prototype engines for test
    • Know how to build prototype engines for test
    30

    Carrying out aircraft detail fitting activities

    Verified
    Key Learning Objectives:
    • Carry out aircraft detail fitting activities
    • Know how to carry out aircraft detail fitting activities
    31

    Carrying Out Fault Diagnosis and Rectification Activities on Motorsport Vehicles During a Competition

    Verified
    Key Learning Objectives:
    • Carry out fault diagnosis and rectification activities on motorsport vehicles during a competition
    • Know how to carry out fault diagnosis and rectification activities on motorsport vehicles during a competition
    32

    Carrying Out Fault Diagnosis on Experimental Vehicles

    Verified
    Key Learning Objectives:
    • Carry out fault diagnosis on experimental vehicles
    • Know how to carry out fault diagnosis on experimental vehicles
    33

    Carrying out hand forging of engineering materials

    Verified
    Key Learning Objectives:
    • Carry out hand forging of engineering materials
    • Know how to carry out hand forging of engineering materials
    34

    Carrying out heat treatment of engineering materials

    Verified
    Key Learning Objectives:
    • Carry out heat treatment of engineering materials
    • Know how to carry out heat treatment of engineering materials
    35

    Carrying out maintenance activities on motorsport vehicle electrical equipment

    Verified
    Key Learning Objectives:
    • Carry out maintenance activities on motorsport vehicle electrical equipment
    • Know how to carry out maintenance activities on motorsport vehicle electrical equipment
    36

    Carrying Out Motorsport Vehicle Inspections During a Competition

    Verified
    Key Learning Objectives:
    • Carry out motorsport vehicle inspections during a competition
    • Know how to carry out motorsport vehicle inspections during a competition
    37

    Complying with statutory regulations and organisational safety requirements

    Verified
    Key Learning Objectives:
    • Comply with statutory regulations and organisational safety requirements
    • Know how to comply with statutory regulations and organisational safety requirements
    38

    Concluding manufacturing operations

    Verified
    Key Learning Objectives:
    • Conclude manufacturing operations
    • Know how to conclude manufacturing operations
    39

    Conducting and Monitoring Road Tests on Vehicles

    Verified
    Key Learning Objectives:
    • Conduct and monitor road tests on vehicles
    • Know how to conduct and monitor road tests on vehicles
    40

    Conducting and Monitoring Static Tests on Vehicles

    Verified
    Key Learning Objectives:
    • Conduct and monitor static tests on vehicles
    • Know how to conduct and monitor static tests on vehicles
    41

    Conducting business improvement activities

    Verified
    Key Learning Objectives:
    • Conduct business improvement activities
    • Know how to conduct business improvement activities
    42

    Cutting and shaping materials using thermal cutting equipment

    Verified
    Key Learning Objectives:
    • Cut and shape materials using thermal cutting equipment
    • Know how to cut and shape materials using thermal cutting equipment
    43

    Cutting and Shaping Sheet Metal for Experimental Vehicle Engineering

    Verified
    Key Learning Objectives:
    • Cut and shape sheet metal for experimental vehicle engineering
    • Know how to cut and shape sheet metal for experimental vehicle engineering
    44

    Diagnosing and Rectifying Faults in Vehicle Electrical and Electronic Systems

    Verified
    Key Learning Objectives:
    • Diagnose and rectify faults in vehicle electrical and electronic systems
    • Know how to diagnose and rectify faults in vehicle electrical and electronic systems
    45

    Diagnosing and rectifying faults on motorsport vehicle systems during competition

    Verified
    Key Learning Objectives:
    • Diagnose and rectify faults on motorsport vehicle systems (during competition)
    • Know how to diagnose and rectify faults on motorsport vehicle systems (during competition)
    46

    Dressing Prototype Engines for Test

    Verified
    Key Learning Objectives:
    • Dress prototype engines for test
    • Know how to dress prototype engines for test
    47

    Fabricating Structural Components for Experimental Vehicle Engineering

    Verified
    Key Learning Objectives:
    • Fabricate structural components for experimental vehicle engineering
    • Know how to fabricate structural components for experimental vehicle engineering
    48

    Fettling, finishing and checking cast components

    Verified
    Key Learning Objectives:
    • Fettle, finish and check cast components
    • Know how to fettle, finish and check cast components
    49

    Finishing surfaces by applying coatings or coverings

    Verified
    Key Learning Objectives:
    • Finish surfaces by applying coatings or coverings
    • Know how to finish surfaces by applying coatings or coverings
    50

    Finishing surfaces by applying treatments

    Verified
    Key Learning Objectives:
    • Finish surfaces by applying treatments
    • Know how to finish surfaces by applying treatments
    51

    Fitting Ancillary Units to Commercial and Passenger Vehicles

    Verified
    Key Learning Objectives:
    • Fit ancillary units to commercial and passenger vehicles
    • Know how to fit ancillary units to commercial and passenger vehicles
    52

    Fitting Electrical and Electronic Components to Commercial and Passenger Carrying Vehicles

    Verified
    Key Learning Objectives:
    • Fit electrical and electronic components to commercial and passenger carrying vehicles
    • Know how to fit electrical and electronic components to commercial and passenger carrying vehicles
    53

    Fitting Internal and External Trim and Fitments to Commercial and Passenger Carrying Vehicles

    Verified
    Key Learning Objectives:
    • 1a Fit internal and external trim and fitments to commercial and passenger carrying vehicles, 1b Fit internal and external trim and fitments to commercial and passenger carrying vehicles (continued), 2a
    • Know how to fit internal and external trim and fitments to commercial and passenger carrying vehicles, 2b
    • Know how to fit internal and external trim and fitments to commercial and passenger carrying vehicles (continued)
    54

    Fitting Pipework Systems to Commercial and Passenger Carrying Vehicles

    Verified
    Key Learning Objectives:
    • work systems to commercial and passenger carrying vehicles
    • Know how to fit pipe
    55

    Fitting Sub Assemblies and Components to Public Service Vehicles

    Verified
    Key Learning Objectives:
    • Fit Sub Assemblies and Components to Public Service Vehicles
    • Know how to fit Sub Assemblies and Components to Public Service Vehicles
    56

    Flattening and polishing vehicle bodies

    Verified
    Key Learning Objectives:
    • Flatten and polish vehicle bodies
    • Know how to flatten and polish vehicle bodies
    57

    Forming and assembling electrical cable enclosure and support systems

    Verified
    Key Learning Objectives:
    • Form and assemble electrical cable enclosure and support systems
    • Know how to form and assemble electrical cable enclosure and support systems
    58

    Forming and assembling pipework systems

    Verified
    Key Learning Objectives:
    • Form and assemble pipe
    • work systems
    • Know how to form and assemble pipe
    59

    General electrical and electronic engineering applications

    Verified
    Key Learning Objectives:
    • Carry out general electrical and electronic engineering applications
    • Know how to carry out general electrical and electronic engineering applications
    60

    General fabrication and welding applications

    Verified
    Key Learning Objectives:
    • Carry out general fabrication and welding applications
    • Know how to carry out general fabrication and welding applications
    61

    General machining, fitting and assembly applications

    Verified
    Key Learning Objectives:
    • Carry out general machining, fitting and assembly applications
    • Know how to carry out general machining, fitting and assembly applications
    62

    General maintenance engineering applications

    Verified
    Key Learning Objectives:
    • Carry out general maintenance engineering applications
    • Know how to carry out general maintenance engineering applications
    63

    Identifying Defects in Motorsport Composite Mouldings

    Verified
    Key Learning Objectives:
    • Identify defects in motorsport composite mouldings
    • Know how to identify defects in motorsport composite mouldings
    64

    Implementing Quality Control Systems and Procedures in an Engineering Environment

    Verified
    Key Learning Objectives:
    • Implement quality control systems and procedures in an engineering environment
    • Know how to implement quality control systems and procedures in an engineering environment
    65

    Inspecting a motorsport vehicle during a competition

    Verified
    Key Learning Objectives:
    • Inspect a motorsport vehicle during a competition
    • Know how to inspect a motorsport vehicle during a competition
    66

    Inspecting manufactured vehicles

    Verified
    Key Learning Objectives:
    • Inspect manufactured vehicles
    • Know how to inspect manufactured vehicles
    67

    Inspecting Motorsport Components by Penetrant Flaw Detection Techniques

    Verified
    Key Learning Objectives:
    • Inspect motorsport components by penetrant flaw detection techniques
    • Know how to inspect motorsport components by penetrant flaw detection techniques
    68

    Installing aircraft mechanical fasteners

    Verified
    Key Learning Objectives:
    • Install aircraft mechanical fasteners
    • Know how to install aircraft mechanical fasteners
    69

    Installing Electrical/Electronic Engine/Transmission Control Units to Prototype Vehicles

    Verified
    Key Learning Objectives:
    • Install electrical/electronic engine/transmission control units to prototype vehicles
    • Know how to install electrical/electronic engine/transmission control units to prototype vehicles
    70

    Joining Components for Commercial and Passenger Carrying Vehicles using a Manual Welding Process

    Verified
    Key Learning Objectives:
    • Join components for commercial and passenger carrying vehicles using a manual welding process
    • Know how to join components for commercial and passenger carrying vehicles using a manual welding process
    71

    Joining Public Service Vehicle Components by Mechanical Processes

    Verified
    Key Learning Objectives:
    • Join Public Service Vehicle Components by Mechanical Processes
    • Know how to Join Public Service Vehicle Components by Mechanical Processes
    72

    Lacquering and Polishing Veneered Vehicle Components

    Verified
    Key Learning Objectives:
    • Lacquer and polish veneered vehicle components
    • Know how to lacquer and polish veneered vehicle components
    73

    Machining and Hand Sewing of Vehicle Trim Components

    Verified
    Key Learning Objectives:
    • Machine and hand sew vehicle trim components
    • Know how to machine and hand sew vehicle trim components
    74

    Machining Components for Experimental Vehicle Engineering

    Verified
    Key Learning Objectives:
    • Machine components for experimental vehicle engineering
    • Know how to machine components for experimental vehicle engineering
    75

    Maintaining and testing process instrumentation and control devices

    Verified
    Key Learning Objectives:
    • Maintain and test process instrumentation and control devices
    • Know how to maintain and test process instrumentation and control devices
    76

    Maintaining electrical equipment/systems

    Verified
    Key Learning Objectives:
    • Maintain electrical equipment/systems
    • Know how to maintain electrical equipment/systems
    77

    Maintaining electronic equipment/systems

    Verified
    Key Learning Objectives:
    • Maintain electronic equipment/systems
    • Know how to maintain electronic equipment/systems
    78

    Maintaining fluid power equipment

    Verified
    Key Learning Objectives:
    • Maintain fluid power equipment
    • Know how to maintain fluid power equipment
    79

    Maintaining mechanical devices and equipment

    Verified
    Key Learning Objectives:
    • Maintain mechanical devices and equipment
    • Know how to maintain mechanical devices and equipment
    80

    Making Vehicle Trim Prototypes and Patterns

    Verified
    Key Learning Objectives:
    • Make vehicle trim prototypes and patterns
    • Know how to make vehicle trim prototypes and patterns
    81

    Manufacturing Vehicle Components by Acrylic Moulding

    Verified
    Key Learning Objectives:
    • Manufacture vehicle components by acrylic moulding
    • Know how to manufacture vehicle components by acrylic moulding
    82

    Manufacturing Vehicle Components by Resin Casting

    Verified
    Key Learning Objectives:
    • Manufacture Vehicle Components by Resin Casting
    • Know how to Manufacture Vehicle Components by Resin Casting
    83

    Manufacturing Vehicle Components by Vacuum Forming

    Verified
    Key Learning Objectives:
    • Manufacture vehicle components by vacuum forming
    • Know how to manufacture vehicle components by vacuum forming
    84

    Manufacturing Vehicle Composite Mouldings using Pre-Preg Laminating Techniques

    Verified
    Key Learning Objectives:
    • Manufacture vehicle composite mouldings using pre-preg laminating techniques
    • Know how to manufacture vehicle composite mouldings using pre-preg laminating techniques
    85

    Manufacturing Vehicle Composite Mouldings using Wet Lay-Up Techniques

    Verified
    Key Learning Objectives:
    • Manufacture vehicle composite mouldings using wet lay-up techniques
    • Know how to manufacture vehicle composite mouldings using wet lay-up techniques
    86

    Marking Out Components for Experimental Vehicle Engineering

    Verified
    Key Learning Objectives:
    • Mark out components for experimental vehicle engineering
    • Know how to mark out components for experimental vehicle engineering
    87

    Modifying Commercial and Passenger Carrying Vehicles

    Verified
    Key Learning Objectives:
    • Modify commercial and passenger carrying vehicles
    • Know how to modify commercial and passenger carrying vehicles
    88

    Preparing and Manoeuvring Armoured Fighting Vehicles AFVs for Maintenance and Transportation

    Verified
    Key Learning Objectives:
    • Prepare and Manoeuvre Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation
    • Know how to prepare and manoeuvre Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation
    89

    Preparing and proving CNC fabrication machine tool programs

    Verified
    Key Learning Objectives:
    • Prepare and prove CNC fabrication machine tool programs
    • Know how to prepare and prove CNC fabrication machine tool programs
    90

    Preparing and proving CNC machine tool programs

    Verified
    Key Learning Objectives:
    • Prepare and prove CNC machine tool programs
    • Know how to prepare and prove CNC machine tool programs
    91

    Preparing and using CNC fabrication machinery

    Verified
    Key Learning Objectives:
    • Prepare and use CNC fabrication machinery
    • Know how to prepare and use CNC fabrication machinery
    92

    Preparing and using CNC machining centres

    Verified
    Key Learning Objectives:
    • Prepare and use CNC machining centres
    • Know how to prepare and use CNC machining centres
    93

    Preparing and using CNC milling machines

    Verified
    Key Learning Objectives:
    • Prepare and use CNC milling machines
    • Know how to prepare and use CNC milling machines
    94

    Preparing and using CNC turning machines

    Verified
    Key Learning Objectives:
    • Prepare and use CNC turning machines
    • Know how to prepare and use CNC turning machines
    95

    Preparing and using grinding machines

    Verified
    Key Learning Objectives:
    • Prepare and use grinding machines
    • Know how to prepare and use grinding machines
    96

    Preparing and using industrial robots

    Verified
    Key Learning Objectives:
    • Prepare and use industrial robots
    • Know how to prepare and use industrial robots
    97

    Preparing and using lathes for turning operations

    Verified
    Key Learning Objectives:
    • Prepare and use lathes for turning operations
    • Know how to prepare and use lathes for turning operations
    98

    Preparing and using manual flame brazing and braze welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual flame brazing and braze welding equipment
    • Know how to prepare and use manual flame brazing and braze welding equipment
    99

    Preparing and using manual metal arc welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual metal arc welding equipment
    • Know how to prepare and use manual metal arc welding equipment
    100

    Preparing and using manual oxy/fuel gas welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual gas welding equipment
    • Know how to prepare and use manual gas welding equipment
    101

    Preparing and using manual TIG or plasma-arc welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual TIG or plasma-arc welding equipment
    • Know how to prepare and use manual TIG or plasma-arc welding equipment
    102

    Preparing and using milling machines

    Verified
    Key Learning Objectives:
    • Prepare and use milling machines
    • Know how to prepare and use milling machines
    103

    Preparing and using semi-automatic MIG, MAG and flux cored arc welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual MIG, MAG and other continuous wire welding equipment
    • Know how to prepare and use manual MIG, MAG and other continuous wire welding equipment
    104

    Preparing for manufacturing operations

    Verified
    Key Learning Objectives:
    • Prepare for manufacturing operations
    • Know how to prepare for manufacturing operations
    105

    Preparing Vehicle Body Surfaces for Finishing

    Verified
    Key Learning Objectives:
    • Prepare Vehicle Body Surfaces for Finishing
    • Know how to prepare vehicle body surfaces for finishing
    106

    Producing aircraft detail assemblies

    Verified
    Key Learning Objectives:
    • Produce aircraft detail assemblies
    • Know how to produce aircraft detail assemblies
    107

    Producing and Assembling Substrates for Vehicle Components

    Verified
    Key Learning Objectives:
    • Produce and assemble substrates for vehicle components
    • Know how to produce and assemble substrates for vehicle components
    108

    Producing and preparing molten materials for casting

    Verified
    Key Learning Objectives:
    • Produce and prepare molten materials for casting
    • Know how to produce and prepare molten materials for casting
    109

    Producing and preparing sand moulds and cores for casting

    Verified
    Key Learning Objectives:
    • Produce and prepare sand moulds and cores for casting
    • Know how to produce and prepare sand moulds and cores for casting
    110

    Producing CAD models/drawings using a CAD system

    Verified
    Key Learning Objectives:
    • Produce CAD models (drawings) using a CAD system
    • Know how to produce CAD models (drawings) using a CAD system
    111

    Producing cast components by manual means

    Verified
    Key Learning Objectives:
    • Produce cast components by manual means
    • Know how to produce cast components by manual means
    112

    Producing Commercial and Passenger Carrying Vehicle Body Sub-Assemblies

    Verified
    Key Learning Objectives:
    • Produce commercial and passenger carrying vehicle body sub-assemblies
    • Know how to produce commercial and passenger carrying vehicle body sub-assemblies
    113

    Producing components by rapid prototyping techniques

    Verified
    Key Learning Objectives:
    • Produce components by rapid prototyping techniques
    • Know how to produce components by rapid prototyping techniques
    114

    Producing components using hand fitting techniques

    Verified
    Key Learning Objectives:
    • Produce components using hand fitting techniques
    • Know how to produce components using hand fitting techniques
    115

    Producing composite assemblies

    Verified
    Key Learning Objectives:
    • Produce composite assemblies
    • Know how to produce composite assemblies
    116

    Producing composite mouldings using pre-preg techniques

    Verified
    Key Learning Objectives:
    • Produce composite mouldings using pre-preg laminating techniques
    • Know how to produce composite mouldings using pre-preg laminating techniques
    117

    Producing Composite Mouldings using Resin Film Infusion Techniques

    Verified
    Key Learning Objectives:
    • Produce Composite Mouldings using Resin Film Infusion Techniques
    • Know how to produce Composite Mouldings using Resin Film Infusion Techniques
    118

    Producing Composite Mouldings using Resin Flow Infusion Techniques

    Verified
    Key Learning Objectives:
    • Produce Composite Mouldings using Resin Flow Infusion Techniques
    • Know how to produce Composite Mouldings using Resin Flow Infusion Techniques
    119

    Producing composite mouldings using wet lay-up techniques

    Verified
    Key Learning Objectives:
    • Produce composite mouldings using wet lay-up techniques
    • Know how to produce composite mouldings using wet lay-up techniques
    120

    Producing electrical or electronic engineering drawings using a CAD system

    Verified
    Key Learning Objectives:
    • Produce electrical or electronic engineering drawings using a CAD system
    • Know how to produce electrical or electronic engineering drawings using a CAD system
    121

    Producing engineering project plans

    Verified
    Key Learning Objectives:
    • Produce engineering project plans
    • Know how to produce engineering project plans
    122

    Producing mechanical assemblies

    Verified
    Key Learning Objectives:
    • Produce mechanical assemblies
    • Know how to produce mechanical assemblies
    123

    Producing mechanical engineering drawings using a CAD system

    Verified
    Key Learning Objectives:
    • Produce mechanical engineering drawings using a CAD system
    • Know how to produce mechanical engineering drawings using a CAD system
    124

    Producing Motorsport Composite Assemblies

    Verified
    Key Learning Objectives:
    • Produce motorsport composite assemblies
    • Know how to produce motorsport composite assemblies
    125

    Producing Motorsport Composite Mouldings using Pre-Preg Laminating Techniques

    Verified
    Key Learning Objectives:
    • Produce motorsport composite mouldings using pre-preg laminating techniques
    • Know how to produce motorsport composite mouldings using pre-preg laminating techniques
    126

    Producing Motorsport Composite Mouldings using Resin Infusion Laminating Techniques

    Verified
    Key Learning Objectives:
    • Produce motorsport composite mouldings using resin infusion laminating techniques
    • Know how to produce motorsport composite mouldings using resin infusion laminating techniques
    127

    Producing Motorsport Composite Mouldings using Wet Lay-up Techniques

    Verified
    Key Learning Objectives:
    • Produce motorsport composite mouldings using wet lay-up techniques
    • Know how to produce motorsport composite mouldings using wet lay-up techniques
    128

    Producing platework components and assemblies

    Verified
    Key Learning Objectives:
    • Produce plate
    • work components and assemblies
    • Know how to produce plate
    129

    Producing sheet metal components and assemblies

    Verified
    Key Learning Objectives:
    • Produce sheet metal components and assemblies
    • Know how to produce sheet metal components and assemblies
    130

    Removal and Fitting Fuel Systems to Prototype Engines for Test

    Verified
    Key Learning Objectives:
    • Remove and fit fuel systemsto prototype engines for test
    • Know how to remove and fit fuel systems to prototype engines for test
    131

    Removing and Refitting Braking Systems on Motorsport Vehicles

    Verified
    Key Learning Objectives:
    • Remove and refit braking systems on motorsport vehicles
    • Know how to remove and refit braking systems on motorsport vehicles
    132

    Removing and Refitting Chassis Sub-Assemblies and Components on Motorsport Vehicles

    Verified
    Key Learning Objectives:
    • Remove and refit chassis sub-assemblies and components on motorsport vehicles
    • Know how to remove and refit chassis sub-assemblies and components on motorsport vehicles
    133

    Removing and Refitting Electrical/Electronic Equipment on Motorsport Vehicles

    Verified
    Key Learning Objectives:
    • Remove and refit electrical/electronic equipment on motorsport vehicles
    • Know how to remove and refit electrical/electronic equipment on motorsport vehicles
    134

    Removing and Refitting Fuel Systems on Motorsport Vehicles

    Verified
    Key Learning Objectives:
    • Remove and refit fuel systems on motorsport vehicles
    • Know how to remove and refit fuel systems on motorsport vehicles
    135

    Removing and Refitting Motorsport Engines and Ancillary Components

    Verified
    Key Learning Objectives:
    • Remove and refit motorsport engines and ancillary components
    • Know how to remove and refit motorsport engines and ancillary components
    136

    Removing and Refitting Steering Systems on Motorsport Vehicles

    Verified
    Key Learning Objectives:
    • Remove and refit steering systems on motorsport vehicles
    • Know how to remove and refit steering systems on motorsport vehicles
    137

    Removing and Refitting Suspension Systems on Motorsport Vehicles

    Verified
    Key Learning Objectives:
    • Remove and refit suspension systems on motorsport vehicles
    • Know how to remove and refit suspension systems on motorsport vehicles
    138

    Removing and Refitting Transmissions on Motorsport Vehicles

    Verified
    Key Learning Objectives:
    • Remove and refit transmissions on motorsport vehicles
    • Know how to remove and refit transmissions on motorsport vehicles
    139

    Removing, Fitting and Trimming Bodywork to Motorsport Vehicles

    Verified
    Key Learning Objectives:
    • Remove, fit and trim body
    • work to motorsport vehicles
    • Know how to remove, fit and trim body
    140

    Repairing and Refurbishing Commercial and Passenger Carrying Vehicles

    Verified
    Key Learning Objectives:
    • Repair and refurbish commercial and passenger carrying vehicles
    • Know how to repair and refurbish commercial and passenger carrying vehicles
    141

    Repairing Defects in Vehicle Composite Mouldings

    Verified
    Key Learning Objectives:
    • Repair defects in vehicle composite mouldings
    • Know how to repair defects in vehicle composite mouldings
    142

    Repairing Motorsport Composite Mouldings

    Verified
    Key Learning Objectives:
    • Repair motorsport composite mouldings
    • Know how to repair motorsport composite mouldings
    143

    Restoring Motorsport Mechanical Components to Usable Condition by Repair

    Verified
    Key Learning Objectives:
    • Restore motorsport mechanical components to usable condition by repair
    • Know how to restore motorsport mechanical components to usable condition by repair
    144

    Setting Up and Testing Prototype Vehicle Data Acquisition Systems

    Verified
    Key Learning Objectives:
    • Set up and test prototype vehicle data acquisition systems
    • Know how to set up and test prototype vehicle data acquisition systems
    145

    Setting Up and Testing Prototype Vehicle Electrical/Electronic Engine/Transmission Control Units

    Verified
    Key Learning Objectives:
    • Set up and test prototype vehicle electrical/electronic engine/transmission control units
    • Set up and test prototype vehicle electrical/electronic engine/transmission controlunits (continued)
    • Know how to set up and test prototype vehicle electrical/electronic engine/transmission control units
    • Know how to set up and test prototype vehicle electrical/electronic engine/transmission controlunits (continued)
    146

    Setting Up Motorsport Vehicles

    Verified
    Key Learning Objectives:
    • Set up motorsport vehicles
    • Know how to set up motorsport vehicles
    147

    Spraying Vehicle Body Surfaces

    Verified
    Key Learning Objectives:
    • Spray vehicle body surfaces
    • Know how to spray vehicle body surfaces
    148

    Stripping and rebuilding motorsport engines pre-competition

    Verified
    Key Learning Objectives:
    • Strip and rebuild motorsport engines (pre-competition)
    • Know how to strip and rebuild motorsport engines (pre-competition)
    149

    Stripping and rebuilding motorsport vehicles pre-competition

    Verified
    Key Learning Objectives:
    • Strip and rebuild motorsport vehicles (pre-competition)
    • Know how to strip and rebuild motorsport vehicles (pre-competition)
    150

    Stripping and Rebuilding Prototype Engines for Test

    Verified
    Key Learning Objectives:
    • Strip and rebuild prototype engines for test
    • Know how to strip and rebuild prototype engines for test
    151

    Testing Prototype Engines _Fixed Dynamometer_

    Verified
    Key Learning Objectives:
    • Test prototype engines (fixed dynamometer)
    • Know how to test prototype engines (fixed dynamometer)
    152

    Testing Prototype Engines Installed in Vehicles

    Verified
    Key Learning Objectives:
    • Test prototype engines installed in vehicles
    • Know how to test prototype engines installed in vehicles
    153

    Transferring materials

    Verified
    Key Learning Objectives:
    • Transfer materials
    • Know how to transfer materials
    154

    Trimming Motorsport Composite Mouldings using Hand Tools

    Verified
    Key Learning Objectives:
    • Trim motorsport composite mouldings using hand tools
    • Know how to trim motorsport composite mouldings using hand tools
    155

    Trimming of Body Components for Vehicles

    Verified
    Key Learning Objectives:
    • Trim body components for vehicles
    • Know how to trim body components for vehicles
    156

    Trimming Vehicle Composite Mouldings using Hand Tools

    Verified
    Key Learning Objectives:
    • Trim vehicle composite mouldings using hand tools
    • Know how to trim vehicle composite mouldings using hand tools
    157

    Using and interpreting engineering data and documentation

    Verified
    Key Learning Objectives:
    • Use and interpret engineering data and documentation
    • Know how to use and interpret engineering data and documentation
    158

    Using computer software packages to assist with engineering activities

    Verified
    Key Learning Objectives:
    • Use computer software packages to assist with engineering activities
    • Know how to use computer software packages to assist with engineering activities
    159

    Using Hand Fitting Techniques to Produce Components for Experimental Vehicle Engineering

    Verified
    Key Learning Objectives:
    • Use hand fitting techniques to produce components for experimental vehicle engineering
    • Know how to use hand fitting techniques to produce components for experimental vehicle engineering
    160

    Using wood for pattern, modelmaking and other engineering applications

    Verified
    Key Learning Objectives:
    • Use wood for pattern, modelmaking and other engineering applications
    • Know how to use wood for pattern, modelmaking and other engineering applications
    161

    Veneering and Finishing Vehicle Components

    Verified
    Key Learning Objectives:
    • Veneer and finish vehicle components
    • Know how to veneer and finish vehicle components
    162

    Welding Motorsport Vehicle Components using a Manual Welding Process

    Verified
    Key Learning Objectives:
    • Weld motorsport vehicle components using a manual welding process
    • Know how to weld motorsport vehicle components using a manual welding process
    163

    Wiring and testing electrical equipment and circuits

    Verified
    Key Learning Objectives:
    • Wire and test electrical equipment and circuits
    • Know how to wire and test electrical equipment and circuits
    164

    Wiring and testing programmable controller based systems

    Verified
    Key Learning Objectives:
    • Wire and test programmable controller based systems
    • Know how to wire and test programmable controller based systems
    165

    Working efficiently and effectively in engineering

    Verified
    Key Learning Objectives:
    • Work efficiently and effectively in engineering
    • Know how to work efficiently and effectively in engineering

    Regulatory & Verification Details

    Qualification Number (QN)
    600/1784/3
    Regulated Status
    Available to learners
    Awarding Body
    EAL
    Qualification Type
    Occupational Qualification
    Operational Start
    May 2011

    Cookies on MasteryMind

    Essential cookies keep you signed in.

    Analytics and advertising cookies stay off unless you accept.

    Read our Privacy Policy.