EAL
    Level 3
    QN: 600/9794/2
    Curriculum Active

    EAL Level 3 NVQ Extended Diploma in Engineering Technical Support

    Official qualification regulated by Ofqual, awarded by EAL. Classified as a Occupational Qualification. Total guided learning hours: 16147 hours.

    Qualification Level
    Level 3
    Awarding Body
    EAL
    Syllabus Units
    141 Units
    Guided Hours
    16147 hrs
    Instant access to interactive lessons, quizzes, and spaced revision.

    Course Syllabus & Study Modules

    Complete breakdown of verified curriculum topics and learning objectives.

    1

    Analysing and Interpreting the Results of Radiographic Tests

    Verified
    Key Learning Objectives:
    • Analyse and interpret the results of radiographic tests
    • Know how to analyse and interpret the results of radiographic tests
    2

    Assembling and testing electronic circuits

    Verified
    Key Learning Objectives:
    • Assemble and test electronic circuits
    • Know how to assemble and test electronic circuits
    3

    Assembling and testing fluid power systems

    Verified
    Key Learning Objectives:
    • Assemble and test fluid power systems
    • Know how to assemble and test fluid power systems
    4

    Assembling pattern, model and engineering woodwork components

    Verified
    Key Learning Objectives:
    • Assemble pattern, model and engineering wood
    • work components
    • Know how to assemble pattern, model and engineering wood
    5

    Assembling Structural Sub Assemblies to Produce a Public Service Vehicle

    Verified
    Key Learning Objectives:
    • Assemble Structural Sub Assemblies to Produce a Public Service Vehicle
    • Know how to Assemble Structural Sub Assemblies to Produce a Public Service Vehicle
    6

    Assembling, wiring and testing electrical panels/components mounted in enclosures

    Verified
    Key Learning Objectives:
    • Assemble, wire and test electrical panels/components mounted in enclosures
    • Know how to assemble, wire and test electrical panels/components mounted in enclosures
    7

    Carrying out aircraft detail fitting activities

    Verified
    Key Learning Objectives:
    • Carry out aircraft detail fitting activities
    • Know how to carry out aircraft detail fitting activities
    8

    Carrying Out Condition Monitoring of Engineering Plant and Equipment

    Verified
    Key Learning Objectives:
    • Carry out condition monitoring of engineering plant and equipment
    • Know how to carry out condition monitoring of engineering plant and equipment
    9

    Carrying Out Fault Diagnosis on Engineering Plant and Equipment

    Verified
    Key Learning Objectives:
    • Carry out fault diagnosis on engineering plant and equipment
    • Know how to carry out fault diagnosis on engineering plant and equipment
    10

    Carrying Out Health and Safety Risk Assessments on Engineering Activities

    Verified
    Key Learning Objectives:
    • Carry out health and safety risk assessments on engineering activities
    • Know how to carry out health and safety risk assessments on engineering activities
    11

    Carrying out maintenance activities on motorsport vehicle electrical equipment

    Verified
    Key Learning Objectives:
    • Carry out maintenance activities on motorsport vehicle electrical equipment
    • Know how to carry out maintenance activities on motorsport vehicle electrical equipment
    12

    Carrying Out Project Management of Engineering Activities

    Verified
    Key Learning Objectives:
    • Carry out project management of engineering activities
    • Know how to carry out project management of engineering activities
    13

    Carrying Out Radiographic Testing Activities

    Verified
    Key Learning Objectives:
    • Carry out radiographic testing activities
    • Know how to carry out radiographic testing activities
    14

    Carrying Out Visual Inspection of Welded Fabrications

    Verified
    Key Learning Objectives:
    • Carry out visual inspection of welded fabrications
    • Know how to carry out visual inspection of welded fabrications
    15

    Checking and Calibrating Electrical and Electronic Test Equipment

    Verified
    Key Learning Objectives:
    • Check and calibrate electrical and electronic test equipment
    • Know how to check and calibrate electrical and electronic test equipment
    16

    Checking and Calibrating Mechanical Inspection Equipment

    Verified
    Key Learning Objectives:
    • Check and calibrate mechanical inspection equipment
    • Know how to check and calibrate mechanical inspection equipment
    17

    Checking and Calibrating Process Control Instrumentation

    Verified
    Key Learning Objectives:
    • Check and calibrate process control instrumentation
    • Know how to check and calibrate process control instrumentation
    18

    Complying with statutory regulations and organisational safety requirements

    Verified
    Key Learning Objectives:
    • Comply with statutory regulations and organisational safety requirements
    • Know how to comply with statutory regulations and organisational safety requirements
    19

    Conducting business improvement activities

    Verified
    Key Learning Objectives:
    • Conduct business improvement activities
    • Know how to conduct business improvement activities
    20

    Cutting and shaping materials using thermal cutting equipment

    Verified
    Key Learning Objectives:
    • Cut and shape materials using thermal cutting equipment
    • Know how to cut and shape materials using thermal cutting equipment
    21

    Determining Engineering Requirements for the Supply of Products or Services

    Verified
    Key Learning Objectives:
    • Determine engineering requirements for the supply of products or services
    • Know how to determine engineering requirements for the supply of products or services
    22

    Determining Engineering Software Requirements

    Verified
    Key Learning Objectives:
    • Determine engineering software requirements
    • Know how to determine engineering software requirements
    23

    Determining Technical Requirements for Non-Destructive Testing

    Verified
    Key Learning Objectives:
    • Determine technical requirements for non-destructive testing
    • Know how to determine technical requirements for non-destructive testing
    24

    Developing and Maintaining Effective Customer Relationships

    Verified
    Key Learning Objectives:
    • Develop and maintain effective customer relationships
    • Know how to develop and maintain effective customer relationships
    25

    Diagnosing and rectifying faults on motorsport vehicle systems during competition

    Verified
    Key Learning Objectives:
    • Diagnose and rectify faults on motorsport vehicle systems (during competition)
    • Know how to diagnose and rectify faults on motorsport vehicle systems (during competition)
    26

    Fettling, finishing and checking cast components

    Verified
    Key Learning Objectives:
    • Fettle, finish and check cast components
    • Know how to fettle, finish and check cast components
    27

    Finishing surfaces by applying coatings or coverings

    Verified
    Key Learning Objectives:
    • Finish surfaces by applying coatings or coverings
    • Know how to finish surfaces by applying coatings or coverings
    28

    Finishing surfaces by applying treatments

    Verified
    Key Learning Objectives:
    • Finish surfaces by applying treatments
    • Know how to finish surfaces by applying treatments
    29

    Fitting Sub Assemblies and Components to Public Service Vehicles

    Verified
    Key Learning Objectives:
    • Fit Sub Assemblies and Components to Public Service Vehicles
    • Know how to fit Sub Assemblies and Components to Public Service Vehicles
    30

    Forming and assembling electrical cable enclosure and support systems

    Verified
    Key Learning Objectives:
    • Form and assemble electrical cable enclosure and support systems
    • Know how to form and assemble electrical cable enclosure and support systems
    31

    Forming and assembling pipework systems

    Verified
    Key Learning Objectives:
    • Form and assemble pipe
    • work systems
    • Know how to form and assemble pipe
    32

    General electrical and electronic engineering applications

    Verified
    Key Learning Objectives:
    • Carry out general electrical and electronic engineering applications
    • Know how to carry out general electrical and electronic engineering applications
    33

    General fabrication and welding applications

    Verified
    Key Learning Objectives:
    • Carry out general fabrication and welding applications
    • Know how to carry out general fabrication and welding applications
    34

    General machining, fitting and assembly applications

    Verified
    Key Learning Objectives:
    • Carry out general machining, fitting and assembly applications
    • Know how to carry out general machining, fitting and assembly applications
    35

    General maintenance engineering applications

    Verified
    Key Learning Objectives:
    • Carry out general maintenance engineering applications
    • Know how to carry out general maintenance engineering applications
    36

    Handing Over and Exchanging Responsibility for Control of Engineering Activities

    Verified
    Key Learning Objectives:
    • Hand over and exchange responsibility for control of engineering activities
    • Know how to hand over and exchange responsibility for control of engineering activities
    37

    Implementing Engineering Activities

    Verified
    Key Learning Objectives:
    • Implement engineering activities
    • Know how to implement engineering activities
    38

    Implementing Quality Control Systems and Procedures in an Engineering Environment

    Verified
    Key Learning Objectives:
    • Implement quality control systems and procedures in an engineering environment
    • Know how to implement quality control systems and procedures in an engineering environment
    39

    Inspecting a motorsport vehicle during a competition

    Verified
    Key Learning Objectives:
    • Inspect a motorsport vehicle during a competition
    • Know how to inspect a motorsport vehicle during a competition
    40

    Inspecting and Testing Electrical Products

    Verified
    Key Learning Objectives:
    • Inspect and test electrical products
    • Know how to inspect and test electrical products
    41

    Inspecting and Testing Electronic Products

    Verified
    Key Learning Objectives:
    • Inspect and test electronic products
    • Know how to inspect and test electronic products
    42

    Inspecting Components using Co-ordinate Measuring Machines _CMM_

    Verified
    Key Learning Objectives:
    • Inspect components using co-ordinate measuring machines (CMM)
    • Know how to inspect components using co-ordinate measuring machines (CMM)
    43

    Inspecting Engineering Products by Magnetic Particle Testing

    Verified
    Key Learning Objectives:
    • Inspect engineering products by magnetic particle testing
    • Know how to inspect engineering products by magnetic particle testing
    44

    Inspecting Engineering Products by Penetrant Flaw Detection Techniques

    Verified
    Key Learning Objectives:
    • Inspect engineering products by penetrant flaw detection techniques
    • Know how to inspect engineering products by penetrant flaw detection techniques
    45

    Inspecting Engineering Products using Ultrasonic Testing Techniques

    Verified
    Key Learning Objectives:
    • Inspect engineering products using ultrasonic testing techniques
    • Know how to inspect engineering products using ultrasonic testing techniques
    46

    Inspecting Fabricated Components and Structures

    Verified
    Key Learning Objectives:
    • Inspect fabricated components and structures
    • Know how to inspect fabricated components and structures
    47

    Inspecting Mechanical Products

    Verified
    Key Learning Objectives:
    • Inspect mechanical products
    • Know how to inspect mechanical products
    48

    Installing aircraft mechanical fasteners

    Verified
    Key Learning Objectives:
    • Install aircraft mechanical fasteners
    • Know how to install aircraft mechanical fasteners
    49

    Joining Public Service Vehicle Components by Mechanical Processes

    Verified
    Key Learning Objectives:
    • Join Public Service Vehicle Components by Mechanical Processes
    • Know how to Join Public Service Vehicle Components by Mechanical Processes
    50

    Loading and Proving Computer Control Programs

    Verified
    Key Learning Objectives:
    • Load and prove computer control programs
    • Know how to load and prove computer control programs
    51

    Maintaining and testing process instrumentation and control devices

    Verified
    Key Learning Objectives:
    • Maintain and test process instrumentation and control devices
    • Know how to maintain and test process instrumentation and control devices
    52

    Maintaining electrical equipment/systems

    Verified
    Key Learning Objectives:
    • Maintain electrical equipment/systems
    • Know how to maintain electrical equipment/systems
    53

    Maintaining electronic equipment/systems

    Verified
    Key Learning Objectives:
    • Maintain electronic equipment/systems
    • Know how to maintain electronic equipment/systems
    54

    Maintaining fluid power equipment

    Verified
    Key Learning Objectives:
    • Maintain fluid power equipment
    • Know how to maintain fluid power equipment
    55

    Maintaining mechanical devices and equipment

    Verified
    Key Learning Objectives:
    • Maintain mechanical devices and equipment
    • Know how to maintain mechanical devices and equipment
    56

    Monitoring Engineering Activities

    Verified
    Key Learning Objectives:
    • Monitor engineering activities
    • Know how to monitor engineering activities
    57

    Obtaining and Controlling Materials for Engineering Activities

    Verified
    Key Learning Objectives:
    • Obtain and control materials for engineering activities
    • Know how to obtain and control materials for engineering activities
    58

    Obtaining Resources for Engineering Activities

    Verified
    Key Learning Objectives:
    • Obtain resources for engineering activities
    • Know how to obtain resources for engineering activities
    59

    Performing Computer System Security Assessments for Engineering Software

    Verified
    Key Learning Objectives:
    • Perform computer system security assessments for engineering software
    • Know how to perform computer system security assessments for engineering software
    60

    Performing Engineering Software Acquisition

    Verified
    Key Learning Objectives:
    • Perform engineering software acquisition
    • Know how to perform engineering software acquisition
    61

    Performing Engineering Software Analysis Techniques

    Verified
    Key Learning Objectives:
    • Perform engineering software analysis techniques
    • Know how to perform engineering software analysis techniques
    62

    Performing Engineering Software Configuration Management

    Verified
    Key Learning Objectives:
    • Perform engineering software configuration management
    • Know how to perform engineering software configuration management
    63

    Performing Engineering Software Safety Assessments

    Verified
    Key Learning Objectives:
    • Perform engineering software safety assessments
    • Know how to perform engineering software safety assessments
    64

    Performing Low Level Programming for Engineering Software

    Verified
    Key Learning Objectives:
    • Perform low level programming for engineering software
    • Know how to perform low level programming for engineering software
    65

    Planning Engineering Activities

    Verified
    Key Learning Objectives:
    • Plan engineering activities
    • Know how to plan engineering activities
    66

    Preparing and Manoeuvring Armoured Fighting Vehicles AFVs for Maintenance and Transportation

    Verified
    Key Learning Objectives:
    • Prepare and Manoeuvre Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation
    • Know how to prepare and manoeuvre Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation
    67

    Preparing and proving CNC fabrication machine tool programs

    Verified
    Key Learning Objectives:
    • Prepare and prove CNC fabrication machine tool programs
    • Know how to prepare and prove CNC fabrication machine tool programs
    68

    Preparing and proving CNC machine tool programs

    Verified
    Key Learning Objectives:
    • Prepare and prove CNC machine tool programs
    • Know how to prepare and prove CNC machine tool programs
    69

    Preparing and using CNC fabrication machinery

    Verified
    Key Learning Objectives:
    • Prepare and use CNC fabrication machinery
    • Know how to prepare and use CNC fabrication machinery
    70

    Preparing and using CNC machining centres

    Verified
    Key Learning Objectives:
    • Prepare and use CNC machining centres
    • Know how to prepare and use CNC machining centres
    71

    Preparing and using CNC milling machines

    Verified
    Key Learning Objectives:
    • Prepare and use CNC milling machines
    • Know how to prepare and use CNC milling machines
    72

    Preparing and using CNC turning machines

    Verified
    Key Learning Objectives:
    • Prepare and use CNC turning machines
    • Know how to prepare and use CNC turning machines
    73

    Preparing and using grinding machines

    Verified
    Key Learning Objectives:
    • Prepare and use grinding machines
    • Know how to prepare and use grinding machines
    74

    Preparing and using industrial robots

    Verified
    Key Learning Objectives:
    • Prepare and use industrial robots
    • Know how to prepare and use industrial robots
    75

    Preparing and using lathes for turning operations

    Verified
    Key Learning Objectives:
    • Prepare and use lathes for turning operations
    • Know how to prepare and use lathes for turning operations
    76

    Preparing and using manual flame brazing and braze welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual flame brazing and braze welding equipment
    • Know how to prepare and use manual flame brazing and braze welding equipment
    77

    Preparing and using manual metal arc welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual metal arc welding equipment
    • Know how to prepare and use manual metal arc welding equipment
    78

    Preparing and using manual oxy/fuel gas welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual gas welding equipment
    • Know how to prepare and use manual gas welding equipment
    79

    Preparing and using manual TIG or plasma-arc welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual TIG or plasma-arc welding equipment
    • Know how to prepare and use manual TIG or plasma-arc welding equipment
    80

    Preparing and using milling machines

    Verified
    Key Learning Objectives:
    • Prepare and use milling machines
    • Know how to prepare and use milling machines
    81

    Preparing and using semi-automatic MIG, MAG and flux cored arc welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual MIG, MAG and other continuous wire welding equipment
    • Know how to prepare and use manual MIG, MAG and other continuous wire welding equipment
    82

    Preparing Ultrasonic Flaw Detection Equipment for Testing Activities

    Verified
    Key Learning Objectives:
    • Prepare ultrasonic flaw detection equipment for testing activities
    • Know how to prepare ultrasonic flaw detection equipment for testing activities
    83

    Preparing Work Areas for Radiographic Testing Activities

    Verified
    Key Learning Objectives:
    • Prepare work areas for radiographic testing activities
    • Know how to prepare work areas for radiographic testing activities
    84

    Producing Engineering Software Design

    Verified
    Key Learning Objectives:
    • Produce engineering software design
    • Know how to produce engineering software design
    85

    Producing aircraft detail assemblies

    Verified
    Key Learning Objectives:
    • Produce aircraft detail assemblies
    • Know how to produce aircraft detail assemblies
    86

    Producing and preparing molten materials for casting

    Verified
    Key Learning Objectives:
    • Produce and prepare molten materials for casting
    • Know how to produce and prepare molten materials for casting
    87

    Producing and preparing sand moulds and cores for casting

    Verified
    Key Learning Objectives:
    • Produce and prepare sand moulds and cores for casting
    • Know how to produce and prepare sand moulds and cores for casting
    88

    Producing CAD models/drawings using a CAD system

    Verified
    Key Learning Objectives:
    • Produce CAD models (drawings) using a CAD system
    • Know how to produce CAD models (drawings) using a CAD system
    89

    Producing cast components by manual means

    Verified
    Key Learning Objectives:
    • Produce cast components by manual means
    • Know how to produce cast components by manual means
    90

    Producing components by rapid prototyping techniques

    Verified
    Key Learning Objectives:
    • Produce components by rapid prototyping techniques
    • Know how to produce components by rapid prototyping techniques
    91

    Producing components using hand fitting techniques

    Verified
    Key Learning Objectives:
    • Produce components using hand fitting techniques
    • Know how to produce components using hand fitting techniques
    92

    Producing composite assemblies

    Verified
    Key Learning Objectives:
    • Produce composite assemblies
    • Know how to produce composite assemblies
    93

    Producing composite mouldings using pre-preg techniques

    Verified
    Key Learning Objectives:
    • Produce composite mouldings using pre-preg laminating techniques
    • Know how to produce composite mouldings using pre-preg laminating techniques
    94

    Producing Composite Mouldings using Resin Film Infusion Techniques

    Verified
    Key Learning Objectives:
    • Produce Composite Mouldings using Resin Film Infusion Techniques
    • Know how to produce Composite Mouldings using Resin Film Infusion Techniques
    95

    Producing Composite Mouldings using Resin Flow Infusion Techniques

    Verified
    Key Learning Objectives:
    • Produce Composite Mouldings using Resin Flow Infusion Techniques
    • Know how to produce Composite Mouldings using Resin Flow Infusion Techniques
    96

    Producing composite mouldings using wet lay-up techniques

    Verified
    Key Learning Objectives:
    • Produce composite mouldings using wet lay-up techniques
    • Know how to produce composite mouldings using wet lay-up techniques
    97

    Producing Contractual Arrangements to Supply or Procure Goods or Services for Engineering Activities

    Verified
    Key Learning Objectives:
    • Produce contractual arrangements to supply or procure goods or services for engineering activities
    • Know how to produce contractual arrangements to supply or procure goods or services for engineering activities
    98

    Producing Electrical Engineering Drawings using Computer Aided Techniques

    Verified
    Key Learning Objectives:
    • Produce electrical engineering drawings using computer aided techniques
    • Know how to produce electrical engineering drawings using computer aided techniques
    99

    Producing electrical or electronic engineering drawings using a CAD system

    Verified
    Key Learning Objectives:
    • Produce electrical or electronic engineering drawings using a CAD system
    • Know how to produce electrical or electronic engineering drawings using a CAD system
    100

    Producing Electronic Engineering Drawings using Computer Aided Techniques

    Verified
    Key Learning Objectives:
    • Produce electronic engineering drawings using computer aided techniques
    • Know how to produce electronic engineering drawings using computer aided techniques
    101

    Producing Engineering Drawings/Models using 3D Computer Aided Techniques

    Verified
    Key Learning Objectives:
    • Produce engineering drawings/models using 3D computer aided techniques
    • Know how to produce engineering drawings/models using 3D computer aided techniques
    102

    Producing engineering project plans

    Verified
    Key Learning Objectives:
    • Produce engineering project plans
    • Know how to produce engineering project plans
    103

    Producing Engineering Software Implementation

    Verified
    Key Learning Objectives:
    • Produce engineering software implementation
    • Know how to produce engineering software implementation
    104

    Producing Engineering Systems/Services Drawings using Computer Aided Techniques

    Verified
    Key Learning Objectives:
    • Produce engineering systems/services drawings using computer aided techniques
    • Know how to produce engineering systems/services drawings using computer aided techniques
    105

    Producing Fabrication/Structural Engineering Drawings using Computer Aided Techniques

    Verified
    Key Learning Objectives:
    • Produce fabrication/structural engineering drawings using computer aided techniques
    • Know how to produce fabrication/structural engineering drawings using computer aided techniques
    106

    Producing Fluid Power Engineering Drawings using Computer Aided Techniques

    Verified
    Key Learning Objectives:
    • Produce fluid power engineering drawings using computer aided techniques
    • Know how to produce fluid power engineering drawings using computer aided techniques
    107

    Producing mechanical assemblies

    Verified
    Key Learning Objectives:
    • Produce mechanical assemblies
    • Know how to produce mechanical assemblies
    108

    Producing mechanical engineering drawings using a CAD system

    Verified
    Key Learning Objectives:
    • Produce mechanical engineering drawings using a CAD system
    • Know how to produce mechanical engineering drawings using a CAD system
    109

    Producing Mechanical Engineering Drawings using Computer Aided Techniques

    Verified
    Key Learning Objectives:
    • Produce mechanical engineering drawings using computer aided techniques
    • Know how to produce mechanical engineering drawings using computer aided techniques
    110

    Producing Off-line Programs for NC/CNC Boring Machines

    Verified
    Key Learning Objectives:
    • Produce off-line programs for NC/CNC boring machines
    • Know how to produce off-line programs for NC/CNC boring machines
    111

    Producing Off-line Programs for NC/CNC Electro-Discharge Machines

    Verified
    Key Learning Objectives:
    • Produce off-line programs for NC/CNC electro-discharge machines
    • Know how to produce off-line programs for NC/CNC electro-discharge machines
    112

    Producing Off-line Programs for NC/CNC Fabrication Machines

    Verified
    Key Learning Objectives:
    • Produce off-line programs for NC/CNC fabrication machines
    • Know how to produce off-line programs for NC/CNC fabrication machines
    113

    Producing Off-line Programs for NC/CNC Gear Cutting Machines

    Verified
    Key Learning Objectives:
    • Produce off-line programs for NC/CNC gear cutting machines
    • Know how to produce off-line programs for NC/CNC gear cutting machines
    114

    Producing Off-line Programs for NC/CNC Grinding Machines

    Verified
    Key Learning Objectives:
    • Produce off-line programs for NC/CNC grinding machines
    • Know how to produce off-line programs for NC/CNC grinding machines
    115

    Producing Off-line Programs for NC/CNC Laser Profiling Machines

    Verified
    Key Learning Objectives:
    • Produce off-line programs for NC/CNC laser profiling machines
    • Know how to produce off-line programs for NC/CNC laser profiling machines
    116

    Producing Off-line Programs for NC/CNC Machining Centres

    Verified
    Key Learning Objectives:
    • Produce off-line programs for NC/CNC machining centres
    • Know how to produce off-line programs for NC/CNC machining centres
    117

    Producing Off-line Programs for NC/CNC Milling Machines

    Verified
    Key Learning Objectives:
    • Produce off-line programs for NC/CNC milling machines
    • Know how to produce off-line programs for NC/CNC milling machines
    118

    Producing Off-line Programs for NC/CNC Turning Machines

    Verified
    Key Learning Objectives:
    • Produce off-line programs for NC/CNC turning machines
    • Know how to produce off-line programs for NC/CNC turning machines
    119

    Producing Off-line Programs for Programmable Logic Controller Equipment

    Verified
    Key Learning Objectives:
    • Produce off-line programs for programmable logic controller equipment
    • Know how to produce off-line programs for programmable logic controller equipment
    120

    Producing Operating Programs for Co-ordinate Measuring Machines _CMM_

    Verified
    Key Learning Objectives:
    • Produce operating programs for co-ordinate measuring machines (CMM)
    • Know how to produce operating programs for co-ordinate measuring machines (CMM)
    121

    Producing Operating Programs for Industrial Robots

    Verified
    Key Learning Objectives:
    • Produce operating programs for industrial robots
    • Know how to produce operating programs for industrial robots
    122

    Producing platework components and assemblies

    Verified
    Key Learning Objectives:
    • Produce plate
    • work components and assemblies
    • Know how to produce plate
    123

    Producing sheet metal components and assemblies

    Verified
    Key Learning Objectives:
    • Produce sheet metal components and assemblies
    • Know how to produce sheet metal components and assemblies
    124

    Producing Technical Information for Engineering Activities

    Verified
    Key Learning Objectives:
    • Produce technical information for engineering activities
    • Know how to produce technical information for engineering activities
    125

    Providing Operational Support for Computer Control Programs

    Verified
    Key Learning Objectives:
    • Provide operational support for computer control programs
    • Know how to provide operational support for computer control programs
    126

    Providing Technical Advice and Guidance on Engineering Activities

    Verified
    Key Learning Objectives:
    • Provide technical advice and guidance on engineering activities
    • Know how to provide technical advice and guidance on engineering activities
    127

    Providing Technical Sales and Marketing Support for Engineering Activities

    Verified
    Key Learning Objectives:
    • Provide technical sales and marketing support for engineering activities
    • Know how to provide technical sales and marketing support for engineering activities
    128

    Resolving Engineering or Manufacturing Support Problems

    Verified
    Key Learning Objectives:
    • solve engineering or manufacturing support problems
    • Know how to re
    129

    Scheduling Engineering Activities

    Verified
    Key Learning Objectives:
    • Schedule engineering activities
    • Know how to schedule engineering activities
    130

    Specifying Non-Destructive Testing Instructions for Inspection Activities

    Verified
    Key Learning Objectives:
    • Specify non-destructive testing instructions for inspection activities
    • Know how to specify non-destructive testing instructions for inspection activities
    131

    Stripping and rebuilding motorsport engines pre-competition

    Verified
    Key Learning Objectives:
    • Strip and rebuild motorsport engines (pre-competition)
    • Know how to strip and rebuild motorsport engines (pre-competition)
    132

    Stripping and rebuilding motorsport vehicles pre-competition

    Verified
    Key Learning Objectives:
    • Strip and rebuild motorsport vehicles (pre-competition)
    • Know how to strip and rebuild motorsport vehicles (pre-competition)
    133

    Supporting logistics operations in an engineering manufacturing environment

    Verified
    Key Learning Objectives:
    • Supporting logistics operations in an engineering manufacturing environment
    • Know how to support logistics operations in an engineering manufacturing environment
    134

    Testing Engineering Software

    Verified
    Key Learning Objectives:
    • Test engineering software
    • Know how to test engineering software
    135

    Using and interpreting engineering data and documentation

    Verified
    Key Learning Objectives:
    • Use and interpret engineering data and documentation
    • Know how to use and interpret engineering data and documentation
    136

    Using and Maintaining Business Procedures and Protocols in an Engineering Environment

    Verified
    Key Learning Objectives:
    • Use and maintain business procedures and protocols in an engineering environment
    • Know how to use and maintain business procedures and protocols in an engineering environment
    137

    Using computer software packages to assist with engineering activities

    Verified
    Key Learning Objectives:
    • Use computer software packages to assist with engineering activities
    • Know how to use computer software packages to assist with engineering activities
    138

    Using wood for pattern, modelmaking and other engineering applications

    Verified
    Key Learning Objectives:
    • Use wood for pattern, modelmaking and other engineering applications
    • Know how to use wood for pattern, modelmaking and other engineering applications
    139

    Wiring and testing electrical equipment and circuits

    Verified
    Key Learning Objectives:
    • Wire and test electrical equipment and circuits
    • Know how to wire and test electrical equipment and circuits
    140

    Wiring and testing programmable controller based systems

    Verified
    Key Learning Objectives:
    • Wire and test programmable controller based systems
    • Know how to wire and test programmable controller based systems
    141

    Working efficiently and effectively in engineering

    Verified
    Key Learning Objectives:
    • Work efficiently and effectively in engineering
    • Know how to work efficiently and effectively in engineering

    Regulatory & Verification Details

    Qualification Number (QN)
    600/9794/2
    Regulated Status
    Available to learners
    Awarding Body
    EAL
    Qualification Type
    Occupational Qualification
    Operational Start
    Jul 2013

    Cookies on MasteryMind

    Essential cookies keep you signed in.

    Analytics and advertising cookies stay off unless you accept.

    Read our Privacy Policy.