EAL
    Level 3
    QN: 600/1650/4
    Curriculum Active

    EAL Level 3 NVQ Extended Diploma in Installation and Commissioning

    Official qualification regulated by Ofqual, awarded by EAL. Classified as a Occupational Qualification. Total guided learning hours: 11626 hours.

    Qualification Level
    Level 3
    Awarding Body
    EAL
    Syllabus Units
    115 Units
    Guided Hours
    11626 hrs
    Instant access to interactive lessons, quizzes, and spaced revision.

    Course Syllabus & Study Modules

    Complete breakdown of verified curriculum topics and learning objectives.

    1

    Assembling and testing electronic circuits

    Verified
    Key Learning Objectives:
    • Assemble and test electronic circuits
    • Know how to assemble and test electronic circuits
    2

    Assembling and testing fluid power systems

    Verified
    Key Learning Objectives:
    • Assemble and test fluid power systems
    • Know how to assemble and test fluid power systems
    3

    Assembling pattern, model and engineering woodwork components

    Verified
    Key Learning Objectives:
    • Assemble pattern, model and engineering wood
    • work components
    • Know how to assemble pattern, model and engineering wood
    4

    Assembling Structural Sub Assemblies to Produce a Public Service Vehicle

    Verified
    Key Learning Objectives:
    • Assemble Structural Sub Assemblies to Produce a Public Service Vehicle
    • Know how to Assemble Structural Sub Assemblies to Produce a Public Service Vehicle
    5

    Assembling, wiring and testing electrical panels/components mounted in enclosures

    Verified
    Key Learning Objectives:
    • Assemble, wire and test electrical panels/components mounted in enclosures
    • Know how to assemble, wire and test electrical panels/components mounted in enclosures
    6

    Carrying out aircraft detail fitting activities

    Verified
    Key Learning Objectives:
    • Carry out aircraft detail fitting activities
    • Know how to carry out aircraft detail fitting activities
    7

    Carrying Out Fault Diagnosis on Escalator Installations

    Verified
    Key Learning Objectives:
    • Carry Out Fault Diagnosis on Escalator Installations
    • Know how to Carry Out Fault Diagnosis on Escalator Installations
    8

    Carrying Out Fault Diagnosis on Lift Installations

    Verified
    Key Learning Objectives:
    • Carry Out Fault Diagnosis on Lift Installations
    • Know how to Carry Out Fault Diagnosis on Lift Installations
    9

    Carrying out hand forging of engineering materials

    Verified
    Key Learning Objectives:
    • Carry out hand forging of engineering materials
    • Know how to carry out hand forging of engineering materials
    10

    Carrying out heat treatment of engineering materials

    Verified
    Key Learning Objectives:
    • Carry out heat treatment of engineering materials
    • Know how to carry out heat treatment of engineering materials
    11

    Carrying out maintenance activities on motorsport vehicle electrical equipment

    Verified
    Key Learning Objectives:
    • Carry out maintenance activities on motorsport vehicle electrical equipment
    • Know how to carry out maintenance activities on motorsport vehicle electrical equipment
    12

    Checking and Setting Lift Installations

    Verified
    Key Learning Objectives:
    • Check and Set Lift Installations
    • Know how to Check and Set Lift Installations
    13

    Commissioning Air Conditioning and Ventilation Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Air Conditioning and Ventilation Equipment and Systems
    • Know how to Commission Air Conditioning and Ventilation Equipment and Systems
    14

    Commissioning Compressed Air Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Compressed Air Equipment and Systems
    • Know how to Commission Compressed Air Equipment and Systems
    15

    Commissioning Electrical/Electronic Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Electrical/Electronic Equipment and Systems
    • Know how to Commission Electrical/Electronic Equipment and Systems
    16

    Commissioning Emergency Electrical Power Generation Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Emergency Electrical Power Generation Equipment and Systems
    • Know how to Commission Emergency Electrical Power Generation Equipment and Systems
    17

    Commissioning Engineered Systems

    Verified
    Key Learning Objectives:
    • Commission Engineered Systems
    • Know how to Commission Engineered Systems
    18

    Commissioning Environmental Pollution Control Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Environmental Pollution Control Equipment and Systems
    • Know how to Commission Environmental Pollution Control Equipment and Systems
    19

    Commissioning Escalator Installations

    Verified
    Key Learning Objectives:
    • Commission Escalator Installations
    • Know how to Commission Escalator Installations
    20

    Commissioning Fluid Power Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Fluid Power Equipment and Systems
    • Know how to Commission Fluid Power Equipment and Systems
    21

    Commissioning Fresh Water Distribution Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Fresh Water Distribution Equipment and Systems
    • Know how to Commission Fresh Water Distribution Equipment and Systems
    22

    Commissioning Heating and Ventilation Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Heating and Ventilation Equipment and Systems
    • Know how to Commission Heating and Ventilation Equipment and Systems
    23

    Commissioning Instrumentation and Control Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Instrumentation and Control Equipment and Systems
    • Know how to Commission Instrumentation and Control Equipment and Systems
    24

    Commissioning Mechanical Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Mechanical Equipment and Systems
    • Know how to Commission Mechanical Equipment and Systems
    25

    Commissioning Process Controller Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Process Controller Equipment and Systems
    • Know how to Commission Process Controller Equipment and Systems
    26

    Commissioning Refrigeration Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Refrigeration Equipment and Systems
    • Know how to Commission Refrigeration Equipment and Systems
    27

    Commissioning Waste/Foul Water Distribution Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Waste/Foul Water Distribution Equipment and Systems
    • Know how to Commission Waste/Foul Water Distribution Equipment and Systems
    28

    Commissioning Workplace Environmental Control Equipment and Systems

    Verified
    Key Learning Objectives:
    • Commission Workplace Environmental Control Equipment and Systems
    • Know how to Commission Workplace Environmental Control Equipment and Systems
    29

    Complying with statutory regulations and organisational safety requirements

    Verified
    Key Learning Objectives:
    • Comply with statutory regulations and organisational safety requirements
    • Know how to comply with statutory regulations and organisational safety requirements
    30

    Conducting business improvement activities

    Verified
    Key Learning Objectives:
    • Conduct business improvement activities
    • Know how to conduct business improvement activities
    31

    Cutting and shaping materials using thermal cutting equipment

    Verified
    Key Learning Objectives:
    • Cut and shape materials using thermal cutting equipment
    • Know how to cut and shape materials using thermal cutting equipment
    32

    Diagnosing and rectifying faults on motorsport vehicle systems during competition

    Verified
    Key Learning Objectives:
    • Diagnose and rectify faults on motorsport vehicle systems (during competition)
    • Know how to diagnose and rectify faults on motorsport vehicle systems (during competition)
    33

    Fettling, finishing and checking cast components

    Verified
    Key Learning Objectives:
    • Fettle, finish and check cast components
    • Know how to fettle, finish and check cast components
    34

    Finishing surfaces by applying coatings or coverings

    Verified
    Key Learning Objectives:
    • Finish surfaces by applying coatings or coverings
    • Know how to finish surfaces by applying coatings or coverings
    35

    Finishing surfaces by applying treatments

    Verified
    Key Learning Objectives:
    • Finish surfaces by applying treatments
    • Know how to finish surfaces by applying treatments
    36

    Fitting Sub Assemblies and Components to Public Service Vehicles

    Verified
    Key Learning Objectives:
    • Fit Sub Assemblies and Components to Public Service Vehicles
    • Know how to fit Sub Assemblies and Components to Public Service Vehicles
    37

    Forming and assembling electrical cable enclosure and support systems

    Verified
    Key Learning Objectives:
    • Form and assemble electrical cable enclosure and support systems
    • Know how to form and assemble electrical cable enclosure and support systems
    38

    Forming and assembling pipework systems

    Verified
    Key Learning Objectives:
    • Form and assemble pipe
    • work systems
    • Know how to form and assemble pipe
    39

    General electrical and electronic engineering applications

    Verified
    Key Learning Objectives:
    • Carry out general electrical and electronic engineering applications
    • Know how to carry out general electrical and electronic engineering applications
    40

    General fabrication and welding applications

    Verified
    Key Learning Objectives:
    • Carry out general fabrication and welding applications
    • Know how to carry out general fabrication and welding applications
    41

    General machining, fitting and assembly applications

    Verified
    Key Learning Objectives:
    • Carry out general machining, fitting and assembly applications
    • Know how to carry out general machining, fitting and assembly applications
    42

    General maintenance engineering applications

    Verified
    Key Learning Objectives:
    • Carry out general maintenance engineering applications
    • Know how to carry out general maintenance engineering applications
    43

    Handing Over and Confirming Completion of Installation or Commissioning Activities

    Verified
    Key Learning Objectives:
    • Hand Over and Confirm Completion of Installation or Commissioning Activities
    • Know how to Hand Over and Confirm Completion of Installation or Commissioning Activities
    44

    Inspecting a motorsport vehicle during a competition

    Verified
    Key Learning Objectives:
    • Inspect a motorsport vehicle during a competition
    • Know how to inspect a motorsport vehicle during a competition
    45

    Installing Air Conditioning and Ventilation Equipment

    Verified
    Key Learning Objectives:
    • Install Air Conditioning and Ventilation Equipment
    • Know how to Install Air Conditioning and Ventilation Equipment
    46

    Installing aircraft mechanical fasteners

    Verified
    Key Learning Objectives:
    • Install aircraft mechanical fasteners
    • Know how to install aircraft mechanical fasteners
    47

    Installing Compressed Air Equipment

    Verified
    Key Learning Objectives:
    • Install Compressed Air Equipment
    • Know how to Install Compressed Air Equipment
    48

    Installing Electrical/Electronic Equipment

    Verified
    Key Learning Objectives:
    • Install Electrical/Electronic Equipment
    • Know how to Install Electrical/Electronic Equipment
    49

    Installing Emergency Electrical Power Generation Equipment

    Verified
    Key Learning Objectives:
    • Install Emergency Electrical Power Generation Equipment
    • Know how to Install Emergency Electrical Power Generation Equipment
    50

    Installing Environmental Pollution Control Equipment

    Verified
    Key Learning Objectives:
    • Install Environmental Pollution Control Equipment
    • Know how to Install Environmental Pollution Control Equipment
    51

    Installing Equipment to Produce an Engineered System

    Verified
    Key Learning Objectives:
    • Install Equipment to Produce an Engineered System
    • Know how to Install Equipment to Produce an Engineered System
    52

    Installing Escalator Equipment

    Verified
    Key Learning Objectives:
    • Install Escalator Equipment
    • Know how to Install Escalator Equipment
    53

    Installing Fluid Power Equipment

    Verified
    Key Learning Objectives:
    • Install Fluid Power Equipment
    • Know how to Install Fluid Power Equipment
    54

    Installing Fresh Water Distribution Equipment

    Verified
    Key Learning Objectives:
    • Install Fresh Water Distribution Equipment
    • Know how to Install Fresh Water Distribution Equipment
    55

    Installing Heating and Ventilation Equipment

    Verified
    Key Learning Objectives:
    • Install Heating and Ventilation Equipment
    • Know how to Install Heating and Ventilation Equipment
    56

    Installing Hydraulic Lift Equipment

    Verified
    Key Learning Objectives:
    • Install Hydraulic Lift Equipment
    • Know how to Install Hydraulic Lift Equipment
    57

    Installing Instrumentation and Control Equipment

    Verified
    Key Learning Objectives:
    • Install Instrumentation and Control Equipment
    • Know how to Install Instrumentation and Control Equipment
    58

    Installing Lift Doors, Frames and Ancillary Components

    Verified
    Key Learning Objectives:
    • Install Lift Doors, Frames and Ancillary Components
    • Know how to Install Lift Doors, Frames and Ancillary Components
    59

    Installing Lift Ropes and Chains

    Verified
    Key Learning Objectives:
    • Install Lift Ropes and Chains
    • Know how to Install Lift Ropes and Chains
    60

    Installing Lift Well and Ancillary Equipment

    Verified
    Key Learning Objectives:
    • Install Lift Well and Ancillary Equipment
    • Know how to Install Lift Well and Ancillary Equipment
    61

    Installing Mechanical Equipment

    Verified
    Key Learning Objectives:
    • Install Mechanical Equipment
    • Know how to Install Mechanical Equipment
    62

    Installing Process Controller Equipment

    Verified
    Key Learning Objectives:
    • Install Process Controller Equipment
    • Know how to Install Process Controller Equipment
    63

    Installing Refrigeration Equipment

    Verified
    Key Learning Objectives:
    • Install Refrigeration Equipment
    • Know how to Install Refrigeration Equipment
    64

    Installing Traction Lift Equipment

    Verified
    Key Learning Objectives:
    • Install Traction Lift Equipment
    • Know how to Install Traction Lift Equipment
    65

    Installing Waste/Foul Water Distribution Equipment

    Verified
    Key Learning Objectives:
    • Install Waste/Foul Water Distribution Equipment
    • Know how to Install Waste/Foul Water Distribution Equipment
    66

    Installing Workplace Environmental Control Equipment

    Verified
    Key Learning Objectives:
    • Install Workplace Environmental Control Equipment
    • Know how to Install Workplace Environmental Control Equipment
    67

    Joining Public Service Vehicle Components by Mechanical Processes

    Verified
    Key Learning Objectives:
    • Join Public Service Vehicle Components by Mechanical Processes
    • Know how to Join Public Service Vehicle Components by Mechanical Processes
    68

    Maintaining and testing process instrumentation and control devices

    Verified
    Key Learning Objectives:
    • Maintain and test process instrumentation and control devices
    • Know how to maintain and test process instrumentation and control devices
    69

    Maintaining electrical equipment/systems

    Verified
    Key Learning Objectives:
    • Maintain electrical equipment/systems
    • Know how to maintain electrical equipment/systems
    70

    Maintaining electronic equipment/systems

    Verified
    Key Learning Objectives:
    • Maintain electronic equipment/systems
    • Know how to maintain electronic equipment/systems
    71

    Maintaining fluid power equipment

    Verified
    Key Learning Objectives:
    • Maintain fluid power equipment
    • Know how to maintain fluid power equipment
    72

    Maintaining mechanical devices and equipment

    Verified
    Key Learning Objectives:
    • Maintain mechanical devices and equipment
    • Know how to maintain mechanical devices and equipment
    73

    Measuring and Setting Out Lift Installations

    Verified
    Key Learning Objectives:
    • Measure and Setting Out Lift Installations
    • Know how to Measure and Setting Out Lift Installations
    74

    Preparing and Manoeuvring Armoured Fighting Vehicles AFVs for Maintenance and Transportation

    Verified
    Key Learning Objectives:
    • Prepare and Manoeuvre Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation
    • Know how to prepare and manoeuvre Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation
    75

    Preparing and proving CNC fabrication machine tool programs

    Verified
    Key Learning Objectives:
    • Prepare and prove CNC fabrication machine tool programs
    • Know how to prepare and prove CNC fabrication machine tool programs
    76

    Preparing and proving CNC machine tool programs

    Verified
    Key Learning Objectives:
    • Prepare and prove CNC machine tool programs
    • Know how to prepare and prove CNC machine tool programs
    77

    Preparing and using CNC fabrication machinery

    Verified
    Key Learning Objectives:
    • Prepare and use CNC fabrication machinery
    • Know how to prepare and use CNC fabrication machinery
    78

    Preparing and using CNC machining centres

    Verified
    Key Learning Objectives:
    • Prepare and use CNC machining centres
    • Know how to prepare and use CNC machining centres
    79

    Preparing and using CNC milling machines

    Verified
    Key Learning Objectives:
    • Prepare and use CNC milling machines
    • Know how to prepare and use CNC milling machines
    80

    Preparing and using CNC turning machines

    Verified
    Key Learning Objectives:
    • Prepare and use CNC turning machines
    • Know how to prepare and use CNC turning machines
    81

    Preparing and using grinding machines

    Verified
    Key Learning Objectives:
    • Prepare and use grinding machines
    • Know how to prepare and use grinding machines
    82

    Preparing and using industrial robots

    Verified
    Key Learning Objectives:
    • Prepare and use industrial robots
    • Know how to prepare and use industrial robots
    83

    Preparing and using lathes for turning operations

    Verified
    Key Learning Objectives:
    • Prepare and use lathes for turning operations
    • Know how to prepare and use lathes for turning operations
    84

    Preparing and using manual flame brazing and braze welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual flame brazing and braze welding equipment
    • Know how to prepare and use manual flame brazing and braze welding equipment
    85

    Preparing and using manual metal arc welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual metal arc welding equipment
    • Know how to prepare and use manual metal arc welding equipment
    86

    Preparing and using manual oxy/fuel gas welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual gas welding equipment
    • Know how to prepare and use manual gas welding equipment
    87

    Preparing and using manual TIG or plasma-arc welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual TIG or plasma-arc welding equipment
    • Know how to prepare and use manual TIG or plasma-arc welding equipment
    88

    Preparing and using milling machines

    Verified
    Key Learning Objectives:
    • Prepare and use milling machines
    • Know how to prepare and use milling machines
    89

    Preparing and using semi-automatic MIG, MAG and flux cored arc welding equipment

    Verified
    Key Learning Objectives:
    • Prepare and use manual MIG, MAG and other continuous wire welding equipment
    • Know how to prepare and use manual MIG, MAG and other continuous wire welding equipment
    90

    Producing aircraft detail assemblies

    Verified
    Key Learning Objectives:
    • Produce aircraft detail assemblies
    • Know how to produce aircraft detail assemblies
    91

    Producing and preparing molten materials for casting

    Verified
    Key Learning Objectives:
    • Produce and prepare molten materials for casting
    • Know how to produce and prepare molten materials for casting
    92

    Producing and preparing sand moulds and cores for casting

    Verified
    Key Learning Objectives:
    • Produce and prepare sand moulds and cores for casting
    • Know how to produce and prepare sand moulds and cores for casting
    93

    Producing CAD models/drawings using a CAD system

    Verified
    Key Learning Objectives:
    • Produce CAD models (drawings) using a CAD system
    • Know how to produce CAD models (drawings) using a CAD system
    94

    Producing cast components by manual means

    Verified
    Key Learning Objectives:
    • Produce cast components by manual means
    • Know how to produce cast components by manual means
    95

    Producing components by rapid prototyping techniques

    Verified
    Key Learning Objectives:
    • Produce components by rapid prototyping techniques
    • Know how to produce components by rapid prototyping techniques
    96

    Producing components using hand fitting techniques

    Verified
    Key Learning Objectives:
    • Produce components using hand fitting techniques
    • Know how to produce components using hand fitting techniques
    97

    Producing composite assemblies

    Verified
    Key Learning Objectives:
    • Produce composite assemblies
    • Know how to produce composite assemblies
    98

    Producing composite mouldings using pre-preg techniques

    Verified
    Key Learning Objectives:
    • Produce composite mouldings using pre-preg laminating techniques
    • Know how to produce composite mouldings using pre-preg laminating techniques
    99

    Producing Composite Mouldings using Resin Film Infusion Techniques

    Verified
    Key Learning Objectives:
    • Produce Composite Mouldings using Resin Film Infusion Techniques
    • Know how to produce Composite Mouldings using Resin Film Infusion Techniques
    100

    Producing Composite Mouldings using Resin Flow Infusion Techniques

    Verified
    Key Learning Objectives:
    • Produce Composite Mouldings using Resin Flow Infusion Techniques
    • Know how to produce Composite Mouldings using Resin Flow Infusion Techniques
    101

    Producing composite mouldings using wet lay-up techniques

    Verified
    Key Learning Objectives:
    • Produce composite mouldings using wet lay-up techniques
    • Know how to produce composite mouldings using wet lay-up techniques
    102

    Producing electrical or electronic engineering drawings using a CAD system

    Verified
    Key Learning Objectives:
    • Produce electrical or electronic engineering drawings using a CAD system
    • Know how to produce electrical or electronic engineering drawings using a CAD system
    103

    Producing engineering project plans

    Verified
    Key Learning Objectives:
    • Produce engineering project plans
    • Know how to produce engineering project plans
    104

    Producing mechanical assemblies

    Verified
    Key Learning Objectives:
    • Produce mechanical assemblies
    • Know how to produce mechanical assemblies
    105

    Producing mechanical engineering drawings using a CAD system

    Verified
    Key Learning Objectives:
    • Produce mechanical engineering drawings using a CAD system
    • Know how to produce mechanical engineering drawings using a CAD system
    106

    Producing platework components and assemblies

    Verified
    Key Learning Objectives:
    • Produce plate
    • work components and assemblies
    • Know how to produce plate
    107

    Producing sheet metal components and assemblies

    Verified
    Key Learning Objectives:
    • Produce sheet metal components and assemblies
    • Know how to produce sheet metal components and assemblies
    108

    Stripping and rebuilding motorsport engines pre-competition

    Verified
    Key Learning Objectives:
    • Strip and rebuild motorsport engines (pre-competition)
    • Know how to strip and rebuild motorsport engines (pre-competition)
    109

    Stripping and rebuilding motorsport vehicles pre-competition

    Verified
    Key Learning Objectives:
    • Strip and rebuild motorsport vehicles (pre-competition)
    • Know how to strip and rebuild motorsport vehicles (pre-competition)
    110

    Using and interpreting engineering data and documentation

    Verified
    Key Learning Objectives:
    • Use and interpret engineering data and documentation
    • Know how to use and interpret engineering data and documentation
    111

    Using computer software packages to assist with engineering activities

    Verified
    Key Learning Objectives:
    • Use computer software packages to assist with engineering activities
    • Know how to use computer software packages to assist with engineering activities
    112

    Using wood for pattern, modelmaking and other engineering applications

    Verified
    Key Learning Objectives:
    • Use wood for pattern, modelmaking and other engineering applications
    • Know how to use wood for pattern, modelmaking and other engineering applications
    113

    Wiring and testing electrical equipment and circuits

    Verified
    Key Learning Objectives:
    • Wire and test electrical equipment and circuits
    • Know how to wire and test electrical equipment and circuits
    114

    Wiring and testing programmable controller based systems

    Verified
    Key Learning Objectives:
    • Wire and test programmable controller based systems
    • Know how to wire and test programmable controller based systems
    115

    Working efficiently and effectively in engineering

    Verified
    Key Learning Objectives:
    • Work efficiently and effectively in engineering
    • Know how to work efficiently and effectively in engineering

    Regulatory & Verification Details

    Qualification Number (QN)
    600/1650/4
    Regulated Status
    Available to learners
    Awarding Body
    EAL
    Qualification Type
    Occupational Qualification
    Operational Start
    May 2011

    Cookies on MasteryMind

    Essential cookies keep you signed in.

    Analytics and advertising cookies stay off unless you accept.

    Read our Privacy Policy.