ECITB
Level 3
QN: 610/6443/9
Curriculum Active
ECITB Level 3 Diploma in Pipe Welding in Engineering
Official qualification regulated by Ofqual, awarded by ECITB. Classified as a Occupational Qualification. Total guided learning hours: 846 hours.
Qualification Level
Level 3
Awarding Body
ECITB
Syllabus Units
7 Units
Guided Hours
846 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Conduct manual arc pipe welding processes
Verified
Key Learning Objectives:
- The candidate will understand the different types of manual arc welding processes used for pipe welding in engineering and be able to prepare and set up the components to be joined to specification for 2 selected processes.2. The candidate will understand weldability of materials, joint geometry and temperature control and be able to safely and correctly weld pipe joints in the 2 selected processes in all positions.3. The candidate will understand inspection and testing methods, weld defects and causes and be able to repair pipe welded joints in engineering and visually inspect welded joints ensuring they meet specifications.
2
Effective working relationships, communication, and inclusion
Verified
Key Learning Objectives:
- The candidate will understand the importance of developing effective and inclusive working relationships in a diverse workplace and will be able to identify and re
- solve common workplace problems while following relevant work-based and professional codes of conduct.2. The candidate will understand responsibilities and reporting lines within their role and will be able to communicate effectively related to these and appropriately re
- solve or report issues.
3
Maintain pipe welding quality control
Verified
Key Learning Objectives:
- The candidate will understand the purpose of welding procedures and standards, how they are created and be able to comply with these when conducting welding activities.2. The candidate will understand welding quality control, quality assurance methods and welding procedures and be able to identify and implement the appropriate quality controls.3. The candidate will u
- understand how weld quality is influenced by the welder and will be able to identify quality impacting factors or conditions taking corrective actions to achieve the specification.
4
Prepare for using manual arc pipe welding processes
Verified
Key Learning Objectives:
- The candidate will understand how to prepare for manual arc welding processes and be able to safely and correctly select, connect and set-up arc welding equipment to conduct welding activities.
5
Reinstate the work area after welding
Verified
Key Learning Objectives:
- The candidate will understand how to isolate, disconnect and dismantle arc welding equipment and will be able to carry out the processes and hand over the work area in line with procedures.
6
Use documentation, procedures and digital technology in welding
Verified
Key Learning Objectives:
- The candidate will be able to interpret complex engineering documentation, specifications, and procedures, applying this information accurately to complete work tasks to the required standard.2. The candidate will understand digital and security policies and be able to effectively use a range of digital devices, information, and technologies relevant to their role.
7
Work safely and sustainably in welding
Verified
Key Learning Objectives:
- The candidate will understand relevant health, safety and environmental legislation and regulations, safe working practices and personal site safety responsibilities and be able to work safely in welding.2. The candidate will understand risk and hazard management and emergency procedures and be able to deal with risks, hazards and emergencies in welding.3. The candidate will understand how their work activities impact on the environment and will be able to take positive actions to support environmental sustainability and the move towards a net zero future.
Regulatory & Verification Details
- Qualification Number (QN)
- 610/6443/9
- Regulated Status
- Available to learners
- Awarding Body
- ECITB
- Qualification Type
- Occupational Qualification
- Operational Start
- Oct 2025