GQA
Level 3
QN: 610/0134/X
Curriculum Active
GQA Level 3 NVQ Diploma in Wood Occupations (Construction)
Official qualification regulated by Ofqual, awarded by GQA. Classified as a Occupational Qualification. Total guided learning hours: 1752 hours.
Qualification Level
Level 3
Awarding Body
GQA
Syllabus Units
21 Units
Guided Hours
1752 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Confirming the Occupational Method of Work in the Workplace
Verified
Key Learning Objectives:
- Assess available project data accurately to determine the occupational method of work., Obtain additional information from alternative sources in cases where the available project data is insufficient.
- Identify work methods that will make best use of resources and meet project, statutory and contractual requirements., Confirm and communicate the selected work method to relevant personnel.
2
Confirming Work Activities and Resources for an Occupational Work Area in the Workplace
Verified
Key Learning Objectives:
- Identify work activities
- assess required resources and plan the sequence of work., Obtain clarification and advice where the resources required are not available.
- Evaluate the work activities and the requirements of any significant external factors against the project requirements.
- Identify work activities which influence each other and make the best use of theresources available.
- Identify changed circumstances that require alterations to the work programme and justify them to decision makers.
3
Conforming to General Health, Safety and Welfare in the Workplace.
Verified
Key Learning Objectives:
- Comply with all workplace health, safety and welfare legislation requirements.
- Recognise hazards associated with the workplace that have not been previously controlled and report them in accordance with organisational procedures.
- Comply with organisational policies and procedures to contribute to health, safety and welfare.
- Work responsibly to contribute to workplace health, safety and welfare whilst carrying out work in the relevant occupational area.
- Comply with and support all organisational security arrangements and approved procedures.
4
Developing and Maintaining Good Occupational Working Relationships in the Workplace
Verified
Key Learning Objectives:
- maintain and encourage working relationships to promote good will and trust., Inform relevant people about work activities in an appropriate level of detail, with the appropriate level of urgency., Offer advice and help to relevant people about work activities and encourage questions/requests for clarification and comments., Clarify proposals with relevant people and discuss alternative suggestions., Re
- solve differences of opinion in ways that minimise offence and maintain goodwill, trust and respect.
5
Erecting roof structure carcassing components in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when erecting roof structure carcassing components.
- Know how to comply with relevant legislation and official guidance when erecting roof structure carcassing components.
- Maintain safe and healthy working practices when erecting roof structure carcassing components.
- Select the required quantity and quality of resources for the methods of work to erect roof structure carcassing components.Minimise the risk of damage to the work and surrounding area when erecting roof structure carcassing components.
- Complete the work within the allocated time when erecting roof structure carcassing components.
- Comply with the given contract information to erect roof structure carcassing components to the required specification.
6
Erecting structural carcassing components in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when erecting structural carcassing components.
- Know how to comply with relevant legislation and official guidance when erecting structural carcassing components.
- Maintain safe and healthy working practices when erecting structural carcassing components.
- Select the required quantity and quality of resources for the methods of work to erect structural carcassing components.Minimise the risk of damage to the work and surrounding area when erecting structural carcassing components.
- Complete the work within the allocated time when erecting structural carcassing components.
- Comply with the given contract information to erect structural carcassing components to the required specification.
7
Installing bespoke first fixing components in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing bespoke first fixing components.
- Know how to comply with relevant legislation and official guidance when installing bespoke first fixing components.
- Maintain safe and healthy working practices when installing bespoke first fixing components.
- Select the required quantity and quality of resources for the methods of work to install bespoke first fixing components.Minimise the risk of damage to the work and surrounding area when installing bespoke first fixing components.
- Complete the work within the allocated time when installing bespoke first fixing components.
- Comply with the given contract information to install bespoke first fixing components to the required specification.
8
Installing bespoke second fixing components in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing bespoke second fixing components.
- Know how to comply with relevant legislation and official guidance when installing bespoke second fixing components.
- Maintain safe and healthy working practices when installing bespoke second fixing components.
- Select the required quantity and quality of resources for the methods of work to install bespoke second fixing components.Minimise the risk of damage to the work and surrounding area when installing bespoke second fixing components.
- Complete the work within the allocated time when installing bespoke second fixing components.
- Comply with the given contract information and the required specification to install bespoke second fixing components.
9
Installing shopfitting fitments in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing shopfitting fitments.
- Know how to comply with relevant legislation and official guidance when installing shopfitting fitments.
- Maintain safe and healthy working practices when installing shopfitting fitments.
- Select the required quantity and quality of resources for the methods of work to install shopfitting fitments.Minimise the risk of damage to the work and surrounding area when installing shopfitting fitments.
- Complete the work within the allocated time when installing shopfitting fitments.
- Comply with the given contract information to install shopfitting fitments to the required specification.
10
Installing shopfitting frames and finishings in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing shopfitting frames and finishings.
- Know how to comply with relevant legislation and official guidance when installing shopfitting frames and finishings.
- Maintain safe and healthy working practices when installing shopfitting frames and finishings.
- Select the required quantity and quality of resources for the methods of work to install shopfitting frames and finishings.Minimise the risk of damage to the work and surrounding area when installing shopfitting frames and finishings.
- Complete the work within the allocated time when installing shopfitting frames and finishings.
- Comply with the given contract information to install shopfitting frames and finishings to the required specification.
11
Installing shopfronts and finishings in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing shopfronts and finishings.
- Know how to comply with relevant legislation and official guidance when installing shopfronts and finishings.
- Maintain safe and healthy working practices when installing shopfronts and finishings.
- Select the required quantity and quality of resources for the methods of work to install shopfronts and finishings.Minimise the risk of damage to the work and surrounding area when installing shopfronts and finishings.
- Complete the work within the allocated time when installing shopfronts and finishings.
- Comply with the given contract information to install shopfronts and finishings to the required specification.
12
Maintaining non-structural and structural components in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when maintaining non-structural and structural components.
- Know how to comply with relevant legislation and official guidance when maintaining non-structural and structural components.
- Maintain safe and healthy working practices when maintaining non-structural and structural components.
- Select the required quantity and quality of resources for the methods of work to maintain non-structural and structural components.Minimise the risk of damage to the work and surrounding area when maintaining non-structural and structural components.
- Complete the work within the allocated time when maintaining non-structural and structural components.
- Comply with the given contract information to maintain non-structural and structural components to the required specification.
13
Manufacturing bespoke shopfitting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when manufacturing bespoke shopfitting products.
- Know how to comply with relevant legislation and official guidance when manufacturing bespoke shopfitting products.
- Maintain safe and healthy working practices when manufacturing bespoke shopfitting products.
- Select the required quantity and quality of resources for the methods of work to manufacture bespoke shopfitting products.Minimise the risk of damage to the work and surrounding area when manufacturing bespoke shopfitting products.
- Complete the work within the allocated time when manufacturing bespoke shopfitting products.
- Comply with the given contract information to manufacture bespoke shopfitting products to the required specification.
14
Manufacturing routine shopfitting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when manufacturing routine shopfitting products.
- Know how to comply with relevant legislation and official guidance when manufacturing routine shopfitting products.
- Maintain safe and healthy working practices when manufacturing routine shopfitting products.
- Select the required quantity and quality of resources for the methods of work to manufacture routine shopfitting products.Minimise the risk of damage to the work and surrounding area when manufacturing routine shopfitting products.
- Complete the work within the allocated time when manufacturing routine shopfitting products.
- Comply with the given contract information to manufacture routine shopfitting products to the required specification.
15
Marking out from setting out details for routine shopfitting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when marking out from setting out details for routine shopfitting products.
- Know how to comply with relevant legislation and official guidance when marking out from setting out details for routine shopfitting products.
- Maintain safe and healthy working practices when marking out from setting out details for routine shopfitting products.
- Select the required quantity and quality of resources for the methods of work to mark out from setting out details for routine shopfitting products.Minimise the risk of damage to the work and surrounding area when marking out from setting out details for routine shopfitting products.
- Complete the work within the allocated time when marking out from setting out details for routine shopfitting products.
- Comply with the given contract information to mark out from setting out details for routine shopfitting products to the required specification.
16
Producing CAD setting out details in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing CAD setting out details.
- Know how to comply with relevant legislation and official guidance when producing CAD setting out details.
- Maintain safe and healthy working practices when producing CAD setting out details.
- Select the required quantity and quality of resources for the methods of work to produce CAD setting out details.Minimise risk of damage to the work and the surrounding area when producing CAD setting out details.
- Complete the work within the allocated time when producing CAD setting out details.
- Comply with the given contract information to produce CAD setting out details to the required specification.
17
Producing setting out details for bespoke shopfitting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing setting out details for bespoke shopfitting products.
- Know how to comply with relevant legislation and official guidance when producing setting out details for bespoke shopfitting products.
- Maintain safe and healthy working practices when producing setting out details for bespoke shopfitting products.
- Select the required quantity and quality of resources for the methods of work to produce setting out details for bespoke shopfitting products.Minimise the risk of damage to the work and surrounding area when producing setting out details for bespoke shopfitting products.
- Complete the work within the allocated time when producing setting out details for bespoke shopfitting products.
- Comply with the given contract information to produce setting out details for bespoke shopfitting products to the required specification.
18
Producing setting out details for routine shopfitting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing setting out details for routine shopfitting products.
- Know how to comply with relevant legislation and official guidance when producing setting out details for routine shopfitting products.
- Maintain safe and healthy working practices when producing setting out details for routine shopfitting products.
- Select the required quantity and quality of resources for the methods of work to produce setting out details for routine shopfitting products.Minimise the risk of damage to the work and surrounding area when producing setting out details for routine shopfitting products.
- Complete the work within the allocated time when producing setting out details for routine shopfitting products.
- Comply with the given contract information to produce setting out details for routine shopfitting products to the required specification.
19
Producing Wood and Wood-based Products Using Computer Numerically Controlled/Numerically Controlled (CNC/NC) Machinery in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery
- Know how to comply with relevant legislation and official guidance when producing wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery
- Maintain safe working practices when producing wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery
- Select the required quantity and quality of resources for the methods of work to produce wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery
- Minimise the risk of damage to the work and surrounding area when producing wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery
- Complete the work within the allocated time when producing wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery
- Comply with the given contract information to produce wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery to the required specification
20
Setting up and using fixed machinery in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when setting up and using fixed machinery.
- Know how to comply with relevant legislation and official guidance when setting up and using fixed machinery.
- Maintain safe and healthy working practices when setting up and using fixed machinery.
- Select the required quantity and quality of resources for the methods of work to set up and use fixed machinery.Minimise the risk of damage to the work and surrounding area when setting up and using fixed machinery.
- Complete the work within the allocated time when setting up and using fixed machinery.
- Comply with the given contract information when setting up and using fixed machinery.
21
Setting up and using transportable cutting and shaping machines in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when setting up and using transportable cutting and shaping machines.
- Know how to comply with relevant legislation and official guidance when setting up and using transportable cutting and shaping machines.
- Maintain safe and healthy working practices when setting up and using transportable cutting and shaping machines.
- Select the required quantity and quality of resources for the methods of work to set up and use transportable cutting and shaping machines.Minimise the risk of damage to the work and surrounding area when setting up and using transportable cutting and shaping machines.
- Complete the work within the allocated time when setting up and using transportable cutting and shaping machines.
- Comply with the given contract information to set up and use transportable cutting and shaping machines to the required specification.
Regulatory & Verification Details
- Qualification Number (QN)
- 610/0134/X
- Regulated Status
- Available to learners
- Awarding Body
- GQA
- Qualification Type
- Occupational Qualification
- Operational Start
- Nov 2021