GQA
Level 3
QN: 501/0211/4
Curriculum Active
GQA PAA\VQ-SET Level 3 NVQ Diploma in Process Engineering Maintenance
Official qualification regulated by Ofqual, awarded by GQA. Classified as a Occupational Qualification. Total guided learning hours: 1809 hours.
Qualification Level
Level 3
Awarding Body
GQA
Syllabus Units
114 Units
Guided Hours
1809 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Adjust Electrical Plant and Equipment to Meet Operational Requirements
Verified
Key Learning Objectives:
- Identify the equipment to be adjusted
- Be able to carry out the required adjustments
- Be able to complete the adjustment process
- Be able to work safely at all times
2
Adjust Instrument and Control Systems to Meet Operational Requirements
Verified
Key Learning Objectives:
- Identify the systems to be adjusted
- Be able to carry out the required adjustments
- Be able to complete the adjustment process
- Be able to work safely at all times
3
Adjust Mechanical Plant and Equipment to Meet Operational Requirements
Verified
Key Learning Objectives:
- Identify the equipment to be adjusted
- Be able to carry out the required adjustments
- Be able to complete the adjustment process
- Be able to work safely at all times
4
Assess the Performance and Condition of Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to set up and carry out the assessment
- Be able to assess and report the results
- Be able to work safely at all times
5
Assess the Performance and Condition of Instrument and Control Systems
Verified
Key Learning Objectives:
- Be able to set up and carry out the assessment
- Be able to assess and report the results
- Be able to work safely at all times
6
Assess the Performance and Condition of Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to set up and carry out the assessment
- Be able to assess and report the results
- Be able to work safely at all times
7
Carry Out Handover of Process Engineering Plant and Equipment
Verified
Key Learning Objectives:
- Be able to carry out handover of process engineering plant and equipment
- Be able to accept and confirm responsibility for the control of process engineering plant and equipment
- Be able to work safely at all times
8
Carry Out Planned Maintenance on Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to carry out planned maintenance
- Be able to report defects and record activities accurately
- Be able to dispose of waste correctly
- Be able to work safely at all times
9
Carry Out Planned Maintenance on Instrument and Control Systems
Verified
Key Learning Objectives:
- Be able to carry out planned maintenance
- Be able to report defects and record activities accurately
- Be able to dispose of waste correctly
- Be able to work safely at all times
10
Carry Out Planned Maintenance on Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to carry out planned maintenance procedures
- Be able to report defects and record activities accurately
- Be able to dispose of waste correctly
- Be able to work safely at all times
11
Carry Out the Removal of Components from Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to carry out the preparations for the removal of components
- Be able to remove components
- Be able to complete the removal process
- Be able to work safely at all times
12
Carry Out the Removal of Components from Instrument and Control Systems
Verified
Key Learning Objectives:
- Be able to prepare for removal of components
- Be able to remove components correctly
- Be able to complete the removal process
- Be able to work safely at all times
13
Carry out the Removal of Components from Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to carry out the preparations for the removal of components
- Be able to remove components
- Be able to complete the removal process
- Be able to work safely at all times
14
Carry Out the Replacement of Components from Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to carry out the preparations needed in order to replace components
- Be able to replace and adjust components correctly
- Be able to deal with problems effectively
- Be able to follow organisational policies and procedures
15
Carry Out the Replacement of Components from Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to carry out the preparations needed in order to replace components
- Be able to replace and adjust components correctly
- Be able to deal with problems effectively
- Be able to follow organisational policies and procedures
16
Carry Out the Replacement of Components in Instrument and Control Systems
Verified
Key Learning Objectives:
- Be able to carry out the preparations needed in order to replace components
- Be able to replace and adjust components correctly
- Be able to deal with problems effectively
- Be able to follow organisational policies and procedures
17
Deal with Variations and Defects in Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to identify variations and defects
- Be able to assess variations and defects
- Be able to report and record variations and defects
- Be able to deal with the variations or defects
- Be able to work safely at all times
18
Deal with Variations and Defects in Instrument and Control Systems
Verified
Key Learning Objectives:
- Be able to identify variations and defects
- Be able to assess variations and defects
- Be able to report and record variations and defects
- Be able to deal with the variations or defects
- Be able to work safely at all times
19
Deal with Variations and Defects in Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to identify variations and defects
- Be able to assess variations and defects
- Be able to report and record variations and defects
- Be able to deal with the variations or defects
- Be able to work safely at all times
20
Determine the Feasibility of Repair of Components from Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to determine the feasibility of repair of components
- Be able to work safely at all times
21
Determine the Feasibility of Repair of Components from Instrument and Control Systems
Verified
Key Learning Objectives:
- Be able to determine the feasibility of repair of components
- Be able to work safely at all times
22
Determine the Feasibility of Repair of Components from Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to determine the feasibility of repair of components
- Be able to work safely at all times
23
Diagnose and Determine the Causes of Faults in Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to investigate and diagnose the possible causes of electrical faults
- Be able to determine electrical fault causes and record details appropriately
- Be able to work safely at all times
24
Diagnose and Determine the Causes of Faults in Instrument and Control Systems
Verified
Key Learning Objectives:
- Be able to investigate and diagnose the possible causes of instrument and control system faults
- Be able to determine instrument and control system fault causes and record details appropriately
- Be able to work safely at all times
25
Diagnose and Determine the Causes of Faults in Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to investigate and diagnose the possible causes of mechanical faults
- Be able to determine mechanical fault causes and record details appropriately
- Be able to work safely at all times
26
Establish that a Mechanical Engineering Maintenance Process has been Completed to Specification
Verified
Key Learning Objectives:
- Be able to carry out equipment checks correctly
- Be able to assess defects and report completion
- Be able to work safely at all times
27
Establish that an Electrical Engineering Maintenance Process has been Completed to Specification
Verified
Key Learning Objectives:
- Be able to carry out equipment checks
- Be able to assess defects and report completion
- Be able to work safely at all times
28
Establish that an Instrument and Control System Maintenance Process has been Completed to Specification
Verified
Key Learning Objectives:
- Be able to carry out equipment checks
- Be able to assess defects and report completion
- Be able to work safely at all times
29
How to Adjust Electrical Plant and Equipment to Meet Operational Requirements
Verified
Key Learning Objectives:
- Know and understand the maintenance schedules, methods and records
- Know own responsibilities and the limits of them with regards to adjustments procedures
- Know how to follow organisational policies and procedures
30
How to Adjust Instrument and Control Systems to Meet Operational Requirements
Verified
Key Learning Objectives:
- Know and understand the maintenance schedules, methods and records
- Know own responsibilities and the limits of them with regards to adjustments procedures
- Know how to follow organisational policies and procedures
31
How to Adjust Mechanical Plant and Equipment to Meet Operational Requirements
Verified
Key Learning Objectives:
- Know and understand the maintenance schedules, methods and records
- Know own responsibilities and the limits of them with regards to adjustments procedures
- Know how to follow organisational policies and procedures
32
How to Assess the Performance and Condition of Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to explain and identify test specifications and monitoring methods
- Know how to assess and report the results
- Know how to follow organisational policies and procedures
33
How to Assess the Performance and Condition of Instrument and Control Systems
Verified
Key Learning Objectives:
- Know how to explain and identify test specifications and monitoring methods
- Know how to assess and report the results
- Know how to follow organisational policies and procedures
34
How to Assess the Performance and Condition of Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to explain and identify test specifications and monitoring methods
- Know how to assess and report the results
- Know how to follow organisational policies and procedures
35
How to Carry Out Handover of Process Engineering Plant and Equipment
Verified
Key Learning Objectives:
- Know how to carry out handover of process engineering plant and equipment
- Know how to follow organisational policies and procedures
36
How to Carry Out Planned Maintenance on Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Know and understand the maintenance schedules, methods and records
- Know own responsibilities and the limits of them
- Know how to identify methods for the disposal of waste
- Know how to follow organisational policies and procedures
37
How to Carry Out Planned Maintenance on Instrument and Control Systems
Verified
Key Learning Objectives:
- Know and understand the maintenance schedules, methods and records
- Know own responsibilities and the limits of them
- Know how to identify methods for the disposal of waste
- Know how to follow organisational policies and procedures
38
How to Carry Out Planned Maintenance on Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Know and understand the maintenance schedules, methods and records
- Know own responsibilities and the limits of them
- Know how to identify methods for the disposal of waste
- Know how to follow organisational policies and procedures
39
How to Carry out the Removal of Components from Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to remove components correctly
- Know how to store and dispose of components
- Know how to follow organisational policies and procedures
40
How to Carry Out the Removal of Components from Instrument and Control Systems
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to remove components correctly
- Know how to store and dispose of components
- Know how to follow organisational policies and procedures
41
How to Carry out the Removal of Components from Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to remove components correctly
- Know how to store and dispose of components
- Know how to follow organisational policies and procedures
42
How to Carry Out the Replacement of Components from Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to carry out the replacement of components including the methods and equipment to use
- Know how to follow organisational policies and procedures
43
How to Carry Out the Replacement of Components from Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to carry out the replacement of components including the methods and equipment to use
- Know how to follow organisational policies and procedures
44
How to Carry Out the Replacement of Components in Instrument and Control Systems
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to carry out the replacement of components including the methods and equipment to use
- Know how to follow organisational policies and procedures
45
How to Deal with Variations and Defects in Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to identify and deal with variations and defects
- Know how to follow organisational policies and procedures
46
How to Deal with Variations and Defects in Instrument and Control Systems
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to identify and deal with variations and defects
- Know how to follow organisational policies and procedures
47
How to Deal with Variations and Defects in Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to identify and deal with variations and defects
- Know how to follow organisational policies and procedures
48
How to Determine the Feasibility of Repair of Components from Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to determine the feasibility of the repair
- Know how to follow organisational policies and procedures
49
How to Determine the Feasibility of Repair of Components from Instrument and Control Systems
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to determine the feasibility of repair
- Know how to follow organisational policies and procedures
50
How to Determine the Feasibility of Repair of Components from Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to determine the feasibility of repair
- Know how to follow organisational policies and procedures
51
How to Diagnose and Determine the Causes of Faults in Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to use fault diagnostic aids and methods in order to diagnose problems
- Know how to analyse methods and techniques while assessing likely risks
- Know how to record details accurately and understand the importance of doing so
- Know how to follow organisational policies and procedures
52
How to Diagnose and Determine the Causes of Faults in Instrument and Control Systems
Verified
Key Learning Objectives:
- Know how to use fault diagnostic aids and methods in order to diagnose problems
- Know how to analyse methods and techniques while assessing likely risks
- Know how to record details accurately and understand the importance of doing so
- Know how to follow organisational policies and procedures
53
How to Diagnose and Determine the Causes of Faults in Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to use fault diagnostic aids and methods in order to diagnose problems
- Know how to analyse methods and techniques while assessing likely risks
- Know how to record details accurately and understand the importance of doing so
- Know how to follow organisational policies and procedures
54
How to Establish that a Mechanical Engineering Maintenance Process has been Completed to Specification
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to carry out equipment checks correctly
- Know how to identify and deal with defects and variations
- Know how to identify documentation procedures and maintain records accurately
- Know how to follow organisational policies and procedures
55
How to Establish that an Electrical Engineering Maintenance Process has been Completed to Specification
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to carry out equipment checks
- Know how to identify and deal with defects and variations
- Know how to identify documentation procedures and maintain records accurately
- Know how to follow organisational policies and procedures
56
How to Establish that an Instrument and Control System Maintenance Process has been Completed to Specification
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to carry out equipment checks
- Know how to identify and deal with defects and variations
- Know how to identify documentation procedures and maintain records accurately
- Know how to follow organisational policies and procedures
57
How to Identify and Suggest Improvements to Working Practices and Procedures whilst Maintaining Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to collect and assess information on current practices and procedures
- Know how to suggest opportunities for improvement
- Know how to follow organisational policies and procedures
58
How to Identify and Suggest Improvements to Working Practices and Procedures whilst Maintaining Instrument and Control Systems
Verified
Key Learning Objectives:
- Know how to collect and assess information on current practices and procedures
- Know how to suggest opportunities for improvement
- Know how to follow organisational policies and procedures
59
How to Identify and Suggest Improvements to Working Practices and Procedures whilst Maintaining Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to collect and assess information on current practices and procedures
- Know how to suggest opportunities for improvement
- Know how to follow organisational policies and procedures
60
How to Inspect Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to inspect electrical plant and equipment
- Know how to identify and deal with defects and variations
- Know how to record the results of the inspection correctly
- Know how to follow organisational policies and procedures
61
How to Inspect Instrument and Control Systems
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to inspect instrument and control systems
- Know how to identify and deal with defects and variations
- Know how to record the results of the inspection correctly
- Know how to follow organisational policies and procedures
62
How to Inspect Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to interpret engineering drawings and their related specifications
- Know how to inspect mechanical plant and equipment
- Know how to identify and deal with defects and variations
- Know how to record the results of the inspection correctly
- Know how to follow organisational policies and procedures
63
How to Interpret Detailed Electrical Information from Technical Sources
Verified
Key Learning Objectives:
- Know how to interpret detailed electrical information from technical sources
- Know how to follow organisational policies and procedures
64
How to Interpret Detailed Instrument and Control Information from Technical Sources
Verified
Key Learning Objectives:
- Know how to interpret detailed instrument and control information from technical sources
- Know how to follow organisational policies and procedures
65
How to Interpret Detailed Mechanical Information from Technical Sources
Verified
Key Learning Objectives:
- Know how to interpret detailed mechanical information from technical sources
- Know how to follow organisational policies and procedures
66
How to Maintain Effective Working Relationships within Process Engineering Maintenance
Verified
Key Learning Objectives:
- Know how to create and maintain effective working relationships
- Know how to follow organisational policies and procedures
67
How to Minimise Risks to Life, Property and the Environment within Process Engineering Environments
Verified
Key Learning Objectives:
- Know how to identify hazards and minimise risks
- Know the safety assessment methods and reporting procedures
- Know how to follow organisational policies and procedures
68
How to Monitor the Performance and Condition of Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to set up and calibrate the equipment for monitoring
- Know how to carry out the monitoring activities and record the outcomes
- Know how to identify and minimise disruption during monitoring
- Know how to follow organisational policies and procedures
69
How to Monitor the Performance and Condition of Instrument and Control Systems
Verified
Key Learning Objectives:
- Know how to set up and calibrate the equipment for monitoring
- Know how to carry out the monitoring activities and record the outcomes
- Know how to identify and minimise disruption during monitoring
- Know how to follow organisational policies and procedures
70
How to Monitor the Performance and Condition of Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to set up and calibrate the equipment for monitoring
- Know how to carry out the monitoring activities and record the outcomes
- Know how to identify and minimise disruption during monitoring
- Know how to follow organisational policies and procedures
71
How to Prepare Equipment in Support of Electrical Engineering Activities
Verified
Key Learning Objectives:
- Know how to determine equipment preparation
- Know how to prepare equipment correctly
- Know how to deal with problems and report completion of preparations
- Know how to follow organisational policies and procedures
72
How to Prepare Equipment in Support of Mechanical Engineering Activities
Verified
Key Learning Objectives:
- Know how to determine equipment preparation
- Know how to prepare equipment accurately
- Know how to deal with problems and report completion of preparations
- Know how to follow organisational policies and procedures
73
How to Prepare Equipment Required for Maintaining Instrument and Control Systems
Verified
Key Learning Objectives:
- Know how to determine equipment preparation
- Know how to prepare equipment for maintaining systems
- Know how to deal with problems and report completion of preparations
- Know how to follow organisational policies and procedures
74
How to Prepare Materials for the Maintenance of Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to prepare materials for maintenance
- Know how to follow organisational policies and procedures
75
How to Prepare Materials for the Maintenance of Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Know how to prepare materials for maintenance
- Know how to follow organisational policies and procedures
76
How to Prepare Materials Required for Maintaining Instrument and Control Systems
Verified
Key Learning Objectives:
- Know how to prepare materials required for maintaining systems
- Know how to follow organisational policies and procedures
77
How to Prepare Work Areas for the Maintenance of Process Engineering Plant and Equipment
Verified
Key Learning Objectives:
- Know how to maintain their own and others' safety
- Know how to prepare the work area for the maintenance of process engineering plant and equipment
- Know how to respond to problems
78
How to Read and Extract Information from Electrical Engineering Drawings and Specifications
Verified
Key Learning Objectives:
- Know how to read and extract information from electrical engineering drawings and specifications
- Know how to follow organisational policies and procedures
79
How to Read and Extract Information from Instrument and Control Engineering Drawings and Specifications
Verified
Key Learning Objectives:
- Know how to read and extract information from instrument and control engineering drawings and specifications
- Know how to follow organisational policies and procedures
80
How to Read and Extract Information from Mechanical Engineering Drawings and Specifications
Verified
Key Learning Objectives:
- Know how to read and extract information from mechanical engineering drawings and specifications
- Know how to follow organisational policies and procedures
81
How to Reinstate the Work Area after Completing the Maintenance of Process Engineering Plant and Equipment
Verified
Key Learning Objectives:
- Know how to maintain their own and others' safety
- Know how to reinstate the work area after completing maintenance of process engineering plant and equipment
- Know how to respond to problems
82
How to Test the Performance and Condition of Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Know the different types of test methods and equipment
- Know how to test equipment correctly
- Know how to follow organisational policies and procedures
83
How to Test the Performance and Condition of Instrument and Control Systems
Verified
Key Learning Objectives:
- Know the different types of test methods and equipment
- Know how to test equipment correctly
- Know how to follow organisational policies and procedures
84
How to Test the Performance and Condition of Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Know the different types of test methods and equipment
- Know how to test equipment correctly
- Know how to follow organisational policies and procedures
85
How to Work Safely, Minimise Risk and Comply with Emergency Procedures within Process Engineering Environments
Verified
Key Learning Objectives:
- Know how to work safely at all times
- Know and understand first aid procedures
- Know how to comply with emergency procedures and reporting procedures
- Know and understand own responsibilities regarding reporting
86
Identify and Suggest Improvements to Working Practices and Procedures whilst Maintaining Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to collect and assess information on current practices and procedures
- Be able to suggest opportunities for improvement
- Be able to work safely at all times
87
Identify and Suggest Improvements to Working Practices and Procedures whilst Maintaining Instrument and Control Systems
Verified
Key Learning Objectives:
- Be able to collect and assess information on current practices and procedures
- Be able to suggest opportunities for improvement
- Be able to work safely at all times
88
Identify and Suggest Improvements to Working Practices and Procedures whilst Maintaining Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to collect and assess information on current practices and procedures
- Be able to suggest opportunities for improvement
- Be able to work safely at all times
89
Inspect Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to inspect electrical plant and equipment
- Be able to record the results of the inspection correctly
- Be able to identify defects and deal with problems promptly
- Be able to work safely at all times
90
Inspect Instrument and Control Systems
Verified
Key Learning Objectives:
- Be able to inspect instrument and control systems
- Be able to record the results of the inspection correctly
- Be able to identify defects and deal with problems promptly
- Be able to work safely at all times
91
Inspect Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to inspect mechanical plant and equipment
- Be able to record the results of the inspection correctly
- Be able to identify defects and deal with problems promptly
- Be able to work safely at all times
92
Interpret Detailed Electrical Information from Technical Sources
Verified
Key Learning Objectives:
- Be able to interpret detailed electrical information from technical sources
- Be able to deal with problems effectively
93
Interpret Detailed Instrument and Control Information from Technical Sources
Verified
Key Learning Objectives:
- Be able to interpret detailed instrument and control information from technical sources
- Be able to deal with problems effectively
94
Interpret Detailed Mechanical Information from Technical Sources
Verified
Key Learning Objectives:
- Be able to interpret detailed mechanical information from technical sources
- Be able to deal with problems effectively
95
Maintain Effective Working Relationships within Process Engineering Maintenance
Verified
Key Learning Objectives:
- Be able to establish and maintain effective working relationships
- Be able to maintain effective communication within working relationships
- Be able to deal with disagreements and problems effectively
96
Minimise Risks to Life, Property and the Environment within Process Engineering Environments
Verified
Key Learning Objectives:
- Be able to identify and minimise risks
- Be able to communicate all necessary information accurately
- Be able to work safely at all times and comply with organisational policies and procedures
97
Monitor the Performance and Condition of Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to set up and calibrate the equipment for monitoring
- Be able to carry out the monitoring activities and review the outcomes
- Be able to work safely at all times
98
Monitor the Performance and Condition of Instrument and Control Systems
Verified
Key Learning Objectives:
- Be able to set up and calibrate the equipment for monitoring
- Be able to carry out the monitoring activities and review the outcomes
- Be able to work safely at all times
99
Monitor the Performance and Condition of Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to set up and calibrate the equipment for monitoring
- Be able to carry out the monitoring activities and review the outcomes
- Be able to work safely at all times
100
Prepare Equipment in Support of Electrical Engineering Activities
Verified
Key Learning Objectives:
- Be able to determine and undertake equipment preparation
- Be able to deal with problems effectively
- Be able to work safely at all times
101
Prepare Equipment in Support of Mechanical Engineering Activities
Verified
Key Learning Objectives:
- Be able to determine and undertake equipment preparation
- Be able to deal with problems effectively
- Be able to work safely at all times
102
Prepare Equipment Required for Maintaining Instrument and Control Systems
Verified
Key Learning Objectives:
- Be able to determine and undertake equipment preparation
- Be able to deal with problems effectively
- Be able to work safely at all times
103
Prepare Materials for the Maintenance of Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to prepare materials accurately and report completion
- Be able to deal with problems effectively
- Be able to work safely at all times
104
Prepare Materials for the Maintenance of Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to prepare materials accurately and report completion
- Be able to deal with problems effectively
- Be able to work safely at all times
105
Prepare Materials Required for Maintaining Instrument and Control Systems
Verified
Key Learning Objectives:
- Be able to prepare materials required for maintaining systems and report completion
- Be able to deal with problems effectively
- Be able to work safely at all times
106
Prepare Work Areas for the Maintenance of Process Engineering Plant and Equipment
Verified
Key Learning Objectives:
- Maintain their own and others safety
- Prepare the work area for the maintenance of process engineering plant and equipment
- Respond to problems
107
Read and Extract Information from Electrical Engineering Drawings and Specifications
Verified
Key Learning Objectives:
- Be able to interpret detailed electrical information from technical sources
- Be able to deal with inaccuracies effectively
108
Read and Extract Information from Instrument and Control Engineering Drawings and Specifications
Verified
Key Learning Objectives:
- Be able to interpret and use detailed instrument and control information
- Be able to deal with problems and inaccuracies effectively
109
Read and Extract Information from Mechanical Engineering Drawings and Specifications
Verified
Key Learning Objectives:
- Be able to interpret and use detailed mechanical information
- Be able to deal with problems and inaccuracies effectively
110
Reinstate the Work Area after Completing the Maintenance of Process Engineering Plant and Equipment
Verified
Key Learning Objectives:
- Maintain their own and others' safety, Reinstate the work area after completing maintenance of process engineering plant and equipment
- Respond to problems
111
Test the Performance and Condition of Electrical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to test the performance and condition of electrical plant and equipment
- Be able to work safely at all times
112
Test the Performance and Condition of Instrument and Control Systems
Verified
Key Learning Objectives:
- Be able to test the performance and condition of instrument and control systems
- Be able to work safely at all times
113
Test the Performance and Condition of Mechanical Plant and Equipment
Verified
Key Learning Objectives:
- Be able to test the performance and condition of mechanical plant and equipment
- Be able to work safely at all times
114
Work Safely, Minimise Risk and Comply with Emergency Procedures within Process Engineering Environments
Verified
Key Learning Objectives:
- Be able to work safely at all times
- Be able to minimise risk of injury and damage
- Be able to comply with emergency and organisational procedures
Regulatory & Verification Details
- Qualification Number (QN)
- 501/0211/4
- Regulated Status
- Available to learners
- Awarding Body
- GQA
- Qualification Type
- Occupational Qualification
- Operational Start
- Jul 2010