IMI
Level 2
QN: 500/9820/2
Curriculum Active
IMI Level 2 Diploma in Auto Electrical and Mobile Electrical Competence
Official qualification regulated by Ofqual, awarded by IMI. Classified as a Occupational Qualification. Total guided learning hours: 932 hours.
Qualification Level
Level 2
Awarding Body
IMI
Syllabus Units
20 Units
Guided Hours
932 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Competency in Enhancing Vehicle Electrical Systems
Verified
Key Learning Objectives:
- Be able to work safely when carrying out vehicle electrical enhancement activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out vehicle electrical enhancement activities
- Be able to record information and make suitable recommendations
2
Competency in Fitting Auxiliary Locks and Security Devices _Electrical & Mechanical_
Verified
Key Learning Objectives:
- Be able to work safely when carrying out the fitting of auxiliary locks and security devices
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out the fitting of auxiliary locks and security devices
- Be able to record information and make suitable recommendations
3
Competency in Health, Safety and Good Housekeeping in the Automotive Environment
Verified
Key Learning Objectives:
- be able to use correct personal and vehicle protection within the automotive environment
- be able to carry out effective housekeeping practices in the automotive environment
- be able to recognise and deal with dangers in order to work safely within the automotive workplace
- be able to conduct themselves responsibly
4
Competency in Inspecting Vehicles Using Prescribed Methods
Verified
Key Learning Objectives:
- Be able to work safely when carrying out light vehicle inspections using prescribed methods
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out light vehicle inspections using prescribed methods
- Be able to record information and make suitable recommendations
5
Competency in Locating and Correcting Simple Electrical Faults in the Automotive Workplace
Verified
Key Learning Objectives:
- Be able to work safely when carrying out electrical testing techniques and rectification activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out electrical testing techniques and rectification activities
- Be able to record information and make suitable recommendations
6
Competency in Removing and Fitting Basic Light Vehicle Mechanical, Electrical and Trim _MET_ Components and Non Permanently Fixed Vehicle Body Panels
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and fitting of basic MET components and non-permanently fixed light vehicle body panels
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and fitting of basic MET components and non-permanently fixed light vehicle body panels
- Be able to record information and make suitable recommendations
7
Competency in Removing and Replacing Light Vehicle Electrical Units and Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and replacement of light vehicle electrical units and components.
- Be able to record information and make suitable recommendations
8
Competency in Supporting Job Roles in the Automotive Work Environment
Verified
Key Learning Objectives:
- be able to work effectively within the organisational structure of the automotive work environment
- be able to obtain and use information in order to support their job role within the automotive work environment
- be able to communicate with and support colleagues and customers effectively within the automotive work environment
- be able to develop and keep good working relationships in the automotive work environment
9
Competency in the Overhauling of Electrical Units
Verified
Key Learning Objectives:
- Be able to work safely when overhauling electrical components.
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to overhaul electrical components.
- Be able to record information and make suitable recommendations
10
Knowledge in Enhancing Vehicle Electrical Systems
Verified
Key Learning Objectives:
- Understand how electrical enhancement systems and components operate
- Understand how to fit electrical enhancement systems and components
- Understand how to carry out checks to any electrical enhancement systems and components fitted
11
Knowledge of Fitting Auxiliary Locks and Security Devices _Electrical & Mechanical_
Verified
Key Learning Objectives:
- Understand how auxiliary locks and security devices operate
- Understand how to fit auxiliary locks and security devices
- Understand how to carry out checks to auxiliary locks and security devices fitted
12
Knowledge of Health, Safety and Good Housekeeping in the Automotive Environment
Verified
Key Learning Objectives:
- understand the correct personal and vehicle protective equipment to be used within the automotive environment
- understand effective housekeeping practices in the automotive environment
- understand key health and safety requirements relevant to the automotive environment
- understand about hazards and potential risks relevant to the automotive environment
- understand personal responsibilities
13
Knowledge of Inspecting Vehicles Using Prescribed Methods
Verified
Key Learning Objectives:
- Understand how to carry out inspections on light vehicle using prescribed methods
14
Knowledge of Locating and Correcting Simple Electrical Faults in the Automotive Workplace
Verified
Key Learning Objectives:
- Understand the use of electrical testing equipment and measurements taken
- Understand how to carry out electrical testing techniques
15
Knowledge of Materials, Fabrication, Tools and Measuring Devices used in the Automotive Environment
Verified
Key Learning Objectives:
- understand how to select
- use and care for hand tools and measuring devices in the automotive environment
- understand how to prepare and use common workshop equipment
- understand how to select materials when fabricating, modifying and repairing vehicles and fitting components
- understand how to apply automotive engineering, fabrication and fitting principles when modifying and repairing vehicles and components
16
Knowledge of Removing and Fitting Basic Light Vehicle Mechanical, Electrical and Trim _MET_ Components and Non Permanently Fixed Vehicle Body Panels
Verified
Key Learning Objectives:
- Understand how to carry out removal and fitting of basic light vehicle mechanical electrical and trim (MET) components
- Understand how to carry out removal and fitting of basic light vehicle non permanently fixed vehicle body panels
17
Knowledge of Removing and Replacing Light Vehicle Electrical Units and Components
Verified
Key Learning Objectives:
- Understand light vehicle electrical and electronic principles
- Understand how light vehicle batteries, starting and charging systems operate
- Understand how light vehicle auxiliary electrical systems operate
- Understand how to check, replace and test light vehicle electrical systems and components
18
Knowledge of Support for Job Roles in the Automotive Work Environment
Verified
Key Learning Objectives:
- understand key organisational structures, functions and roles within the automotive work environment
- understand the importance of obtaining, interpreting and using information in order to support their job role within the automotive work environment
- understand the importance of different types of communication within the automotive work environment
- understand communication requirements when carrying out vehicle repairs in the automotive work environment
- understand how to develop good working relationships with colleagues and customers in the automotive workplace
19
Knowledge of the Overhauling of Electrical Units
Verified
Key Learning Objectives:
- Understand how to use appropriate electrical testing equipment
- Understand how to find
- select and use sources of overhaul information
- Understand how to carry out testing to electrical systems and components
- Understand how to overhaul starting, charging, motor and actuator systems
20
Skills in Materials, Fabrication, Tools and Measuring Devices used in the Automotive Environment
Verified
Key Learning Objectives:
- be able to select
- maintain and use and hand tools and measuring devices in the automotive environment
- be able to prepare and use common workshop equipment
- be able to select materials when fabricating, modifying and repairing vehicles and fitting components
- be able to apply automotive engineering, fabrication and fitting principles when modifying and repairing vehicles and components
Regulatory & Verification Details
- Qualification Number (QN)
- 500/9820/2
- Regulated Status
- Available to learners
- Awarding Body
- IMI
- Qualification Type
- Occupational Qualification
- Operational Start
- Sept 2010
- Operational End
- Dec 2029