IMI
Level 2
QN: 500/9824/X
Curriculum Active
IMI Level 2 Diploma in Auto Electrical and Mobile Electrical Principles (VRQ)
Official qualification regulated by Ofqual, awarded by IMI. Classified as a Vocationally-Related Qualification. Total guided learning hours: 708 hours.
Qualification Level
Level 2
Awarding Body
IMI
Syllabus Units
20 Units
Guided Hours
708 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Knowledge in Enhancing Vehicle Electrical Systems
Verified
Key Learning Objectives:
- Understand how electrical enhancement systems and components operate
- Understand how to fit electrical enhancement systems and components
- Understand how to carry out checks to any electrical enhancement systems and components fitted
2
Knowledge of Fitting Auxiliary Locks and Security Devices _Electrical & Mechanical_
Verified
Key Learning Objectives:
- Understand how auxiliary locks and security devices operate
- Understand how to fit auxiliary locks and security devices
- Understand how to carry out checks to auxiliary locks and security devices fitted
3
Knowledge of Health, Safety and Good Housekeeping in the Automotive Environment
Verified
Key Learning Objectives:
- understand the correct personal and vehicle protective equipment to be used within the automotive environment
- understand effective housekeeping practices in the automotive environment
- understand key health and safety requirements relevant to the automotive environment
- understand about hazards and potential risks relevant to the automotive environment
- understand personal responsibilities
4
Knowledge of Inspecting Vehicles Using Prescribed Methods
Verified
Key Learning Objectives:
- Understand how to carry out inspections on light vehicle using prescribed methods
5
Knowledge of Locating and Correcting Simple Electrical Faults in the Automotive Workplace
Verified
Key Learning Objectives:
- Understand the use of electrical testing equipment and measurements taken
- Understand how to carry out electrical testing techniques
6
Knowledge of Materials, Fabrication, Tools and Measuring Devices used in the Automotive Environment
Verified
Key Learning Objectives:
- understand how to select
- use and care for hand tools and measuring devices in the automotive environment
- understand how to prepare and use common workshop equipment
- understand how to select materials when fabricating, modifying and repairing vehicles and fitting components
- understand how to apply automotive engineering, fabrication and fitting principles when modifying and repairing vehicles and components
7
Knowledge of Removing and Fitting Basic Light Vehicle Mechanical, Electrical and Trim _MET_ Components and Non Permanently Fixed Vehicle Body Panels
Verified
Key Learning Objectives:
- Understand how to carry out removal and fitting of basic light vehicle mechanical electrical and trim (MET) components
- Understand how to carry out removal and fitting of basic light vehicle non permanently fixed vehicle body panels
8
Knowledge of Removing and Replacing Light Vehicle Electrical Units and Components
Verified
Key Learning Objectives:
- Understand light vehicle electrical and electronic principles
- Understand how light vehicle batteries, starting and charging systems operate
- Understand how light vehicle auxiliary electrical systems operate
- Understand how to check, replace and test light vehicle electrical systems and components
9
Knowledge of Support for Job Roles in the Automotive Work Environment
Verified
Key Learning Objectives:
- understand key organisational structures, functions and roles within the automotive work environment
- understand the importance of obtaining, interpreting and using information in order to support their job role within the automotive work environment
- understand the importance of different types of communication within the automotive work environment
- understand communication requirements when carrying out vehicle repairs in the automotive work environment
- understand how to develop good working relationships with colleagues and customers in the automotive workplace
10
Knowledge of the Overhauling of Electrical Units
Verified
Key Learning Objectives:
- Understand how to use appropriate electrical testing equipment
- Understand how to find
- select and use sources of overhaul information
- Understand how to carry out testing to electrical systems and components
- Understand how to overhaul starting, charging, motor and actuator systems
11
Skills in Enhancing Vehicle Electrical Systems
Verified
Key Learning Objectives:
- Be able to work safely when carrying out vehicle electrical enhancement activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out vehicle electrical enhancement activities
- Be able to record information and make suitable recommendations
12
Skills in Fitting Auxiliary Locks and Security Devices _Electrical & Mechanical_
Verified
Key Learning Objectives:
- Be able to work safely when carrying out the fitting of auxiliary locks and security devices
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out the fitting of auxiliary locks and security devices
- Be able to record information and make suitable recommendations
13
Skills in Health, Safety and Good Housekeeping in the Automotive Environment
Verified
Key Learning Objectives:
- be able to use correct personal and vehicle protection within the automotive environment
- be able to carry out effective housekeeping practices in the automotive environment
- be able to recognise and deal with dangers in order to work safely within the automotive workplace
- be able to conduct themselves responsibly
14
Skills in Inspecting Vehicles Using Prescribed Methods
Verified
Key Learning Objectives:
- Be able to work safely when carrying out light vehicle inspections using prescribed methods
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out light vehicle inspections using prescribed methods
- Be able to record information and make suitable recommendations
15
Skills in Locating and Correcting Simple Electrical Faults in the Automotive Workplace
Verified
Key Learning Objectives:
- Be able to work safely when carrying out electrical testing techniques and rectification activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out electrical testing techniques and rectification activities
- Be able to record information and make suitable recommendations
16
Skills in Materials, Fabrication, Tools and Measuring Devices used in the Automotive Environment
Verified
Key Learning Objectives:
- be able to select
- maintain and use and hand tools and measuring devices in the automotive environment
- be able to prepare and use common workshop equipment
- be able to select materials when fabricating, modifying and repairing vehicles and fitting components
- be able to apply automotive engineering, fabrication and fitting principles when modifying and repairing vehicles and components
17
Skills in Removing and Fitting of Basic Light Vehicle Mechanical, Electrical and Trim _MET_ Components and Non Permanently Fixed Vehicle Body Panels
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and fitting of basic MET components and non-permanently fixed light vehicle body panels
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and fitting of basic MET components and non-permanently fixed light vehicle body panels
- Be able to record information and make suitable recommendations
18
Skills in Removing and Replacing Light Vehicle Electrical Units and Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and replacement of light vehicle electrical units and components.
- Be able to record information and make suitable recommendations
19
Skills in Supporting Job Roles in the Automotive Work Environment
Verified
Key Learning Objectives:
- be able to work effectively within the organisational structure of the automotive work environment
- be able to obtain and use information in order to support their job role within the automotive work environment
- be able to communicate with and support colleagues and customers effectively within the automotive work environment
- be able to develop and keep good working relationships in the automotive work environment
20
Skills in the Overhauling of Electrical Units
Verified
Key Learning Objectives:
- Be able to work safely when overhauling electrical components.
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to overhaul electrical components.
- Be able to record information and make suitable recommendations
Regulatory & Verification Details
- Qualification Number (QN)
- 500/9824/X
- Regulated Status
- Available to learners
- Awarding Body
- IMI
- Qualification Type
- Vocationally-Related Qualification
- Operational Start
- Sept 2010
- Operational End
- Dec 2029