IMI
Level 2
QN: 601/3427/6
Curriculum Active
IMI Level 2 Diploma in Classic Vehicle Restoration Competence
Official qualification regulated by Ofqual, awarded by IMI. Classified as a Occupational Qualification. Total guided learning hours: 1320 hours.
Qualification Level
Level 2
Awarding Body
IMI
Syllabus Units
34 Units
Guided Hours
1320 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Competence In Applying Fillers And Foundation Materials To Vehicle Panels And Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out the preparation and application of foundation materials to vehicles
- Be able to use information relevant to the identification of substrates, and the preparation and application of fillers and foundation materials
- Be able to use appropriate tools, equipment and procedures for the preparation of vehicle panels and components prior to the application of fillers and foundation materials
- Be able to carry out the preparation and application of foundation materials to vehicle substrates
- Be able to record information and make suitable recommendations
2
Competence In Health, Safety And Good Housekeeping In The Vehicle Repair Environment
Verified
Key Learning Objectives:
- Be able to use correct personal and vehicle protection within the vehicle restoration environment
- Be able to carry out effective housekeeping practices in the vehicle restoration environment
- Be able to recognise and deal with dangers in order to work safely within the vehicle restoration environment
- Be able to conduct themselves responsibly
3
Competence In Minor Repairs To Damage On Vehicle Exterior Body Panels
Verified
Key Learning Objectives:
- Be able to work safely when carrying out minor repairs to damage on vehicle exterior body panels
- Be able to use relevant information to carry out the tasks associated with minor repairs to damage on vehicle exterior body panels
- Be able to select appropriate tools, equipment and materials to carry out minor repairs to damage on vehicle exterior body panels
- Be able to carry out minor repairs to damage on vehicle exterior body panels
- Be able to record information and make suitable recommendations
4
Competence In Preparing Vehicle Surfaces To Receive Paint
Verified
Key Learning Objectives:
- Be able to work safely when carrying out preparation activities prior to the painting of vehicle substrates
- Be able to use information relevant to preparation activities prior to the painting of vehicle substrates
- Be able to use appropriate tools, equipment and procedures for the preparation of vehicle panels and components prior to painting
- Be able to carry out the preparation of vehicle substrates, including pre-painted surfaces, to accept foundation materials and paint topcoats
- Be able to record information and make suitable recommendations
5
Competence In The Identification, Appreciation And Rectification Methods Of Minor Body Defects
Verified
Key Learning Objectives:
- Be able to work safely when carrying out the identification of minor defects on vehicle exterior body panels
- Be able to use relevant information to carry out the tasks associated with rectifying minor body defects
- Be able to identify the minor body defects common to the various body panel construction materials
- Be able to select and demonstrate the correct use of appropriate tools, equipment and materials for rectifying minor body defects on motor vehicle exterior body panels
- Be able to record information and make suitable recommendations
6
Competence In The Identification, Appreciation And Rectification Of Minor Paint Defects
Verified
Key Learning Objectives:
- Be able to work safely and effectively when carrying out the identification, appreciation and rectification of minor paint defects
- Be able to select and use information relevant to the identification, appreciation and rectification of minor paint defects
- Be able to use appropriate tools, equipment and procedures for rectifying minor paint defects
- Be able to record information and make suitable recommendations
7
Competence In The Maintenance Of Vehicle Electrical Systems
Verified
Key Learning Objectives:
- Be able to work safely when working on vehicle electrical system components
- Be able to use relevant information to carry out work on vehicle electrical system components
- Be able to use appropriate tools and equipment when working on vehicle electrical system components
- Be able to carry out removal, maintenance and replacement of vehicle electrical system components.
- Be able to record information and make suitable recommendations
8
Competence In The Refurbishment Of Basic Trim Components
Verified
Key Learning Objectives:
- Be able to work safely and effectively when carrying out refurbishment of basic trim components
- Be able to use information relevant to the refurbishment of basic trim components
- Be able to use appropriate tools and equipment during the refurbishment of basic trim components
- Be able to carry out the refurbishment of basic trim components
- Be able to record information and make suitable recommendations
9
Competence In The Removal And Replacement Of Interior And Exterior trim Components To Vehicles
Verified
Key Learning Objectives:
- Be able to work safely when carrying out the removal and replacement of vehicle interior and exterior trim components
- Be able to use information relevant to the removal and fitting of vehicle interior and exterior trim components
- Be able to use appropriate tools and equipment for the removal and fitting of vehicle interior and exterior trim components
- Be able to carry out the removal and fitting of vehicle interior and exterior trim components
- Be able to record information and make suitable recommendations
10
Competence In The Service And Maintenance Of Vehicle Chassis Systems
Verified
Key Learning Objectives:
- Be able to work safely when working on vehicle chassis systems and components
- Be able to use relevant information to carry out work on vehicle chassis systems and components
- Be able to use appropriate tools and equipment when working on vehicle chassis systems and components
- Be able to carry out removal, maintenance and replacement of vehicle chassis system components
- Be able to record information and make suitable recommendations
11
Competence In The Service And Maintenance Of Vehicle Driveline Systems
Verified
Key Learning Objectives:
- Be able to work safely when working on vehicle driveline components
- Be able to use relevant information to carry out work on vehicle driveline components
- Be able to use appropriate tools and equipment when working on vehicle driveline components
- Be able to carry out removal, maintenance and replacement of vehicle driveline components.
- Be able to record information and make suitable recommendations
12
Competence In The Service And Maintenance Of Vehicle Engine Systems
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal, repair, diagnostic and rectification activities
- Be able to select and use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal, repair, diagnostic and rectification activities
- Be able to record information and make suitable recommendations
13
Competence In Thermal Joining Processes
Verified
Key Learning Objectives:
- Be able to work safely when carrying out thermal joining operations on vehicle body panels and components
- Be able to use information relevant to preparing for and carrying out thermal joining processes
- Be able to select and use appropriate tools, equipment and consumables to carry out the range of thermal joining operations on vehicle body panels and components
- Be able to carry out oxy-acetylene welding operations
- Be able to carry out M.A.G.S. (M.I.G.) welding operations
- Be able to carry out T.A.G.S. (T.I.G.) welding operations
- Be able to carry out resistance welding operations
- Be able to carry out non-fusion thermal joining operations
14
Competence In Vehicle Panel Mechanical Fastening Operations
Verified
Key Learning Objectives:
- Be able to work safely and effectively when carrying out the removal and fitting of panels attached to the vehicle by mechanical fasteners
- Be able to use information relevant to the removal and fitting of panels attached to the vehicle by mechanical fasteners
- Be able to use appropriate tools and equipment for the removal and fitting of panels attached to the vehicle by mechanical fasteners
- Be able to carry out the removal of panels attached to the vehicle by mechanical fasteners
- Be able to carry out the fitting of panels attached to the vehicle by mechanical fasteners
- Be able to record information and make suitable recommendations
15
Competency In Dismantling, Measuring And Recording Techniques
Verified
Key Learning Objectives:
- Be able to record progress at every key stage of a vehicle restoration project
- Be able to dismantle vehicles and components safely
- Be able to measure vehicle components for condition, wear and alignment
- Be able to compile detailed reports for customers and others
16
Competency In Tools And Equipment Used In The Vehicle Repair Environment
Verified
Key Learning Objectives:
- Be able to select
- maintain and use hand tools and equipment in the vehicle restoration environment
- Be able to prepare and use common power tools and workshop equipment in the vehicle restoration environment
- Be able to apply automotive engineering, fabrication and fitting principles when using tools and equipment for modifying and restoring vehicles and components
17
Knowledge Of Applying Fillers And Foundation Materials To Vehicle Panels And Components
Verified
Key Learning Objectives:
- Understand how to identify body surfaces requiring the application of fillers and foundation materials used in vehicle painting
- Understand how to prepare surfaces to accept fillers and foundation materials used in vehicle painting
- Understand how to select, mix and adjust the viscosity of fillers and foundation materials used in vehicle painting
- Understand the procedures used for applying the range of fillers and foundation materials used in vehicle painting
18
Knowledge Of Dismantling, Measuring And Recording Techniques
Verified
Key Learning Objectives:
- Understand how to record progress at every key stage of a vehicle restoration project
- Understand how to dismantle vehicles and components safely
- Understand how to measure vehicle components for condition, wear and alignment
- Understand how to compile detailed reports for customers and others
19
Knowledge Of Health, Safety And Good Housekeeping In The Vehicle Repair Environment
Verified
Key Learning Objectives:
- Understand the correct personal and vehicle protective equipment to be used within the vehicle restoration environment
- Understand effective housekeeping practices in the vehicle restoration environment
- Understand key health and safety requirements relevant to the vehicle restoration environment
- Understand the hazards and potential risks relevant to the vehicle restoration environment
- Understand personal responsibilities
20
Knowledge Of How To Remove And Fit Vehicle Interior And Exterior Components
Verified
Key Learning Objectives:
- Understand how to carry out the removal and fitting of motor vehicle exterior and interior trim components
21
Knowledge Of Identification, Appreciation And Rectification Methods Of Minor Body Defects
Verified
Key Learning Objectives:
- Understand the methods used to identify minor defects on motor vehicle exterior body panels
- Understand the causes and effects of minor defects on motor vehicle exterior body panels
- Understand the principles of selecting safe and correct methods of rectification of minor defects on motor vehicle exterior body panels
22
Knowledge Of Materials Used In Vehicle Construction
Verified
Key Learning Objectives:
- Understand the types and properties of ferrous and non-ferrous metals used in the manufacture of vehicles and their components
- Understand the types and properties of non-metallic materials used in the manufacture of vehicles and their components
- Understand the factors affecting the selection and use of the range of materials used for manufacturing vehicles and their components
23
Knowledge Of Minor Repairs To Damage On Vehicle Exterior Body Panels
Verified
Key Learning Objectives:
- Understand the principles of selection and use of appropriate tools and equipment for rectifying minor defects on motor vehicle exterior body panels
- Understand the range and properties of repair materials, and their safe use during minor repairs to motor vehicle exterior body panels
- Understand the techniques used to carry out minor repairs to motor vehicle exterior body panels
24
Knowledge Of Preparing Vehicle Surfaces To Receive Paint
Verified
Key Learning Objectives:
- Understand the methods used to identify vehicle body surfaces prior to their preparation for the application of paint materials
- Understand how to select tools, equipment and materials used for the preparation of vehicle substrates prior to the application of paint materials
- Understand how to prepare original, new and repaired vehicle panels and components for the application of foundation and topcoat materials
25
Knowledge Of Refurbishment Of Basic Trim Components
Verified
Key Learning Objectives:
- Understand the limits of trim refurbishment
- Understand how to identify materials used in vehicle trim
- Understand how to prepare trim in preparation for refurbishment
- Know how to select the correct products, materials and equipment to complete the refurbishment
- Know the processes of application for trim refurbishment
- Understand quality control procedures relating to trim refurbishment
- Understand the importance of good housekeeping in relation to trim refurbishment
26
Knowledge Of The History And Heritage Of Classic Vehicles
Verified
Key Learning Objectives:
- Understand the historic timelines relating to the different motoring eras
- Understand the key technological innovations that helped to advance the development of the motor car
- Understand that there were key figures responsible for major motor car developments
- Understand the descriptive names used to identify the common vehicle body styles and driveline/chassis layouts
- Understand the Heritage of Classic Vehicles
27
Knowledge Of The Identification, Appreciation And Rectification Of Minor Paint Defects
Verified
Key Learning Objectives:
- Understand how to identify paint surfaces and the minor paint defects that can occur on them
- Understand how to determine the causes of minor paint defects
- Understand how to rectify minor paint defects
- Understand the methods of preventing paint defects from occurring
28
Knowledge Of Thermal Joining Processes
Verified
Key Learning Objectives:
- Understand the principles of selection and use of the various thermal joining processes available when carrying out repairs on motor vehicle body panels and components
- Understand the procedures involved to use oxy-acetylene welding processes safely when carrying out repairs on motor vehicle body panels and components
- Understand the procedures involved to use M.A.G.S. welding processes safely when carrying out repairs on motor vehicle body panels and components
- Understand the procedures involved to use resistance welding processes safely when carrying out repairs on motor vehicle body panels and components
- Understand the procedures involved to use TAGS (TIG) welding processes safely when carrying out repairs on motor vehicle body panels and components
- Understand the procedures involved to use non-fusion joining processes safely when carrying out repairs on motor vehicle body panels and components
29
Knowledge Of Tools And Equipment Used In The Vehicle Restoration Environment
Verified
Key Learning Objectives:
- Understand how to select
- use and care for hand tools used in the vehicle restoration environment
- Understand how to prepare and use common power tools and workshop equipment in the vehicle restoration environment
- Understand how to apply automotive engineering, fabrication and fitting principles when restoring and modifying vehicles and fabricating components
- Know machine operating procedures and the extent of their capabilities
30
Knowledge Of Vehicle Chassis Systems And Their Maintenance
Verified
Key Learning Objectives:
- Know how vehicle braking systems and components operate
- Know how vehicle suspension systems and components operate
- Know how vehicle steering systems and components operate
- Know how vehicle wheel and tyre systems and components operate
31
Knowledge Of Vehicle Driveline Systems And Their Maintenance
Verified
Key Learning Objectives:
- Know layouts and components of vehicle drivelines
- Know vehicle clutch systems and components
- Know vehicle gearboxes and components
- Know vehicle final drive components
32
Knowledge Of Vehicle Electrical Systems And Their Maintenance
Verified
Key Learning Objectives:
- Know vehicle electrical principles and circuits
- Know how vehicle battery, charging and starting systems and components operate
- Know how vehicle lighting systems and components operate
- Know how vehicle auxiliary electrical systems and components operate
33
Knowledge Of Vehicle Engine Systems And Their Maintenance.
Verified
Key Learning Objectives:
- Know vehicle engine types, components and maintenance procedures.
- Know vehicle engine cooling and lubrication systems, their components and maintenance procedures.
- Know vehicle engine fuel systems, their components and maintenance procedures.
- Know vehicle ignition systems, their components and maintenance procedures.
- Know vehicle engine air intake and exhaust systems, their components and maintenance procedures.
34
Knowledge Of Vehicle Panel Mechanical Fastening Operations
Verified
Key Learning Objectives:
- Understand the procedures used during the removal and fitting of panels attached to the vehicle by mechanical fasteners
- Understand how to select and use appropriate tools and equipment for removing and fitting vehicle panels attached by mechanical fasteners
- Understand how to carry out motor vehicle body mechanical fastening operations
Regulatory & Verification Details
- Qualification Number (QN)
- 601/3427/6
- Regulated Status
- Available to learners
- Awarding Body
- IMI
- Qualification Type
- Occupational Qualification
- Operational Start
- Aug 2014
- Operational End
- Dec 2026