IMI
Level 2
QN: 500/9810/X
Curriculum Active
IMI Level 2 Diploma in Vehicle Fitting Competence
Official qualification regulated by Ofqual, awarded by IMI. Classified as a Occupational Qualification. Total guided learning hours: 1363 hours.
Qualification Level
Level 2
Awarding Body
IMI
Syllabus Units
32 Units
Guided Hours
1363 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Competency in Assessing and Securing the Roadside Situation
Verified
Key Learning Objectives:
- Be able to secure and protect an incident site
- Be able to secure the safety of others
- Be able to make an initial assessment of a site and provide information to others
2
Competency in Health, Safety and Good Housekeeping in the Automotive Environment
Verified
Key Learning Objectives:
- be able to use correct personal and vehicle protection within the automotive environment
- be able to carry out effective housekeeping practices in the automotive environment
- be able to recognise and deal with dangers in order to work safely within the automotive workplace
- be able to conduct themselves responsibly
3
Competency in Identifying and Agreeing Motor Vehicle Customer Service Needs
Verified
Key Learning Objectives:
- be able to obtain relevant information from the customer
- be able to provide relevant information to the customer
- be able to agree work undertaken with the customer
- be able to ensure recording systems are implemented correctly
4
Competency in Inspection and Repair of Light Vehicle Clutches
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to inspect light vehicle clutches and components
- Be able to replace light vehicle clutches and components
- Be able to record information and make suitable recommendations
5
Competency in Inspection and Replacement of Light Vehicle Braking Systems & Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to inspect and test light vehicle braking systems
- Be able to replace light vehicle braking system components
- Be able to record information and make suitable recommendations
6
Competency in Inspection and Replacement of Light Vehicle Exhaust Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to inspect exhaust components
- Be able to repair and replace exhaust components
- Be able to record information and make suitable recommendations
7
Competency in Inspection and Replacement of Light Vehicle Suspension Dampers and Springs
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to inspect and test light vehicle suspension dampers and springs
- Be able to remove and replace light vehicle suspension dampers and springs
- Be able to record information and make suitable recommendations
8
Competency in Inspection Repair and Replacement of Commercial Vehicle Tyres
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to inspect commercial vehicle wheels and tyres
- Be able to carry out the repair and replacement of commercial vehicle tyres, wheels and tubes
- Be able to carry out tread regrooving on commercial vehicle tyres
- Be able to record information and make suitable recommendations
9
Competency in Inspection, Repair and Replacement of High Performance Light Vehicle Tyre
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to inspect high performance light vehicle tyres
- Be able to repair and replace high performance light vehicle tyres
- Be able to balance wheels and tyres and carry out final checks on high performance light vehicles
- Be able to record information and make suitable recommendations
10
Competency in Inspection, Repair and Replacement of Motorcycle Tyres
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to inspect motorcycle tyres
- Be able to repair and replace motorcycle tyres and tubes
- Be able to balance wheels and tyres on motorcycles
- Be able to record information and make suitable recommendations
11
Competency in Inspection, Testing and Replacement of Vehicle Batteries and Related Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out testing and replacement activities
- Be able to inspect and test batteries and components
- Be able to remove and replace batteries and components
- Be able to record information and make suitable recommendations
12
Competency in Light Vehicle Four Wheel Alignment
Verified
Key Learning Objectives:
- Be able to work safely when carrying out testing and adjustment activities
- Be able to check light vehicle four wheel alignment
- Be able to adjust light vehicle four wheel alignment
- Be able to record information and make suitable recommendations
13
Competency in Routine Light Vehicle Maintenance
Verified
Key Learning Objectives:
- Be able to work safely when carrying out light vehicle routine maintenance
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out light vehicle routine maintenance
- Be able to record information and make suitable recommendations
14
Competency in Safe use of Oxy-Acetylene in Automotive Applications
Verified
Key Learning Objectives:
- Be able to work safely when carrying out oxy-acetylene activities
- Be able to set up hand held oxy-acetylene equipment
- Be able to use hand held oxy-acetylene equipment
15
Competency in Supporting Job Roles in the Automotive Work Environment
Verified
Key Learning Objectives:
- be able to work effectively within the organisational structure of the automotive work environment
- be able to obtain and use information in order to support their job role within the automotive work environment
- be able to communicate with and support colleagues and customers effectively within the automotive work environment
- be able to develop and keep good working relationships in the automotive work environment
16
Knowledge in Assessing and Securing the Roadside Situation
Verified
Key Learning Objectives:
- Understand about organisational requirements and procedures
- Understand the legal requirements and codes of practice for site protection and recovery arrangements
- Understand how to assess and secure a site
17
Knowledge of Health, Safety and Good Housekeeping in the Automotive Environment
Verified
Key Learning Objectives:
- understand the correct personal and vehicle protective equipment to be used within the automotive environment
- understand effective housekeeping practices in the automotive environment
- understand key health and safety requirements relevant to the automotive environment
- understand about hazards and potential risks relevant to the automotive environment
- understand personal responsibilities
18
Knowledge of how to Identify and Agree Motor Vehicle Customer Service Needs
Verified
Key Learning Objectives:
- understand legislative and organisational requirements and procedures
- understand how to communicate and care for customers
- understand company products and services
19
Knowledge of inspection and Repair of Light Vehicle Clutches
Verified
Key Learning Objectives:
- Understand the specialist tools and equipment used when inspecting and replacing clutches
- Understand the different types of light vehicle clutches
- Understand how to inspect and replace light vehicle clutches
20
Knowledge of Inspection and Replacement of Light Vehicle Exhaust Components
Verified
Key Learning Objectives:
- Understand the specialist tools and equipment used when inspecting and replacing exhaust components
- Understand about exhaust system components
- Understand how to inspect and replace exhaust systems
21
Knowledge of Inspection and Replacement of Light Vehicle Suspension Dampers and Springs
Verified
Key Learning Objectives:
- Understand the tools and equipment used when inspecting and replacing light vehicle suspension dampers and springs
- Understand the different types of suspension dampers and springs
- Understand how to inspect, test and replace suspension dampers and springs
22
Knowledge of Inspection, Adjustment and Replacement of Light Vehicle Braking Systems and Components
Verified
Key Learning Objectives:
- Understand the tools and equipment used when inspecting, adjusting and replacing light vehicle braking system components
- Understand the different types of light vehicle braking systems and components
- Understand how to inspect, test, adjust and replace light vehicle braking systems and components
23
Knowledge of Inspection, Repair and Replacement of Commercial Vehicle Tyres
Verified
Key Learning Objectives:
- Understand commercial vehicle wheel and tyre construction, legislation and special workplace procedures
- Understand the tools and equipment used when working with commercial vehicle tyres
- Understand the construction of, and the materials used in the manufacture and repair of commercial vehicle tyres
- Understand how to inspect, remove, repair and replace of commercial vehicle tyres
24
Knowledge of Inspection, Repair and Replacement of High Performance Light Vehicle Tyres
Verified
Key Learning Objectives:
- Understand high performance light vehicle wheel and tyre construction, legislation and special workplace procedures
- Understand the tools and equipment used when working with high performance light vehicle tyres
- Understand the materials used in the repair of high performance light vehicle tyres
- Understand how to inspect, remove, repair and replace high performance light vehicle tyres
25
Knowledge of Inspection, Repair and Replacement of Motorcycle Tyres
Verified
Key Learning Objectives:
- Understand motorcycle tyre construction, legislation and special workplace procedures
- Understand the tools and equipment used when working with motorcycle tyres
- Understand the materials used in the repair of motorcycle tyres
- Understand how to inspect, remove, repair and replace motorcycle tyres
26
Knowledge of Inspection, Testing and Replacement of Vehicle Batteries and Related Components
Verified
Key Learning Objectives:
- Understand the tools and equipment used when inspecting, testing and replacing vehicle batteries
- Understand the different types of vehicle battery and charging system
- Understand how to inspect, test and replace light vehicle batteries
27
Knowledge of Light Vehicle Four Wheel Alignment
Verified
Key Learning Objectives:
- Understand steering and suspension system principles
- Understand how to measure four wheel alignment
- Understand how to adjust four wheel alignment
- Understand the importance of testing completed adjustments
28
Knowledge of Materials, Fabrication, Tools and Measuring Devices used in the Automotive Environment
Verified
Key Learning Objectives:
- understand how to select
- use and care for hand tools and measuring devices in the automotive environment
- understand how to prepare and use common workshop equipment
- understand how to select materials when fabricating, modifying and repairing vehicles and fitting components
- understand how to apply automotive engineering, fabrication and fitting principles when modifying and repairing vehicles and components
29
Knowledge of Routine Light Vehicle Maintenance
Verified
Key Learning Objectives:
- Understand how to carry out routine light vehicle maintenance
- Understand the importance of carrying out light vehicle maintenance
30
Knowledge of Safe use of Oxy-acetylene in Automotive Applications
Verified
Key Learning Objectives:
- Understand how to work safely with oxy-acetylene equipment
- Understand the theory of the thermal cutting process
- Understand how to set up thermal cutting equipment and carry out the process
- Understand the problems and defects associated with thermal cutting
31
Knowledge of Support for Job Roles in the Automotive Work Environment
Verified
Key Learning Objectives:
- understand key organisational structures, functions and roles within the automotive work environment
- understand the importance of obtaining, interpreting and using information in order to support their job role within the automotive work environment
- understand the importance of different types of communication within the automotive work environment
- understand communication requirements when carrying out vehicle repairs in the automotive work environment
- understand how to develop good working relationships with colleagues and customers in the automotive workplace
32
Skills in Materials, Fabrication, Tools and Measuring Devices used in the Automotive Environment
Verified
Key Learning Objectives:
- be able to select
- maintain and use and hand tools and measuring devices in the automotive environment
- be able to prepare and use common workshop equipment
- be able to select materials when fabricating, modifying and repairing vehicles and fitting components
- be able to apply automotive engineering, fabrication and fitting principles when modifying and repairing vehicles and components
Regulatory & Verification Details
- Qualification Number (QN)
- 500/9810/X
- Regulated Status
- Available to learners
- Awarding Body
- IMI
- Qualification Type
- Occupational Qualification
- Operational Start
- Sept 2010
- Operational End
- Dec 2029