NOCN
Level 2
QN: 601/3114/7
Curriculum Active
NOCN Level 2 Diploma in Construction Plant or Machinery Maintenance (Construction)
Official qualification regulated by Ofqual, awarded by NOCN. Classified as a Vocationally-Related Qualification. Total guided learning hours: 894 hours.
Qualification Level
Level 2
Awarding Body
NOCN
Syllabus Units
14 Units
Guided Hours
894 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Carry out specific tests on plant or machinery
Verified
Key Learning Objectives:
- Know how to prepare for carrying out specific tests on plant or machinery.
- Be able to prepare for carrying out specific tests on plant or machinery.
- Know how to carry out specific tests on plant or machinery.
- Be able to carry out specific tests on plant or machinery.
- Know how to complete activities after carrying out specific tests on plant or machinery.
- Be able to complete activities after carrying out specific tests on plant or machinery.
2
Configure and hand over plant or machinery
Verified
Key Learning Objectives:
- Know how to prepare for configuring and handing over plant or machinery.
- Be able to prepare for configuring and handing over plant or machinery.
- Know how to configure and hand over plant or machinery.
- Be able to configure plant or machinery.
- Be able to hand over plant or machinery.
3
Conform to productive work practices
Verified
Key Learning Objectives:
- Know how to work productively in the workplace
- Understand low/zero carbon outcomes
- Understand equality and diversity in the workplace
- Know how to communicate with others
- Work productively in the workplace
4
Dismantle and assemble plant or machinery components
Verified
Key Learning Objectives:
- Know how to prepare for dismantling and assembling plant or machinery components.
- Be able to prepare for dismantling and assembling plant or machinery components.
- Know how to inspect plant or machinery components for wear, damage and serviceability.
- Be able to inspect plant or machinery components for wear, damage and serviceability.
- Know how to dismantle and assemble plant or machinery components.
- Be able to dismantle and assemble plant or machinery components.
- Know how to carry out completion activities after dismantling and assembling plant or machinery components.
- Be able to carry out completion activities after dismantling and assembling plant or machinery components.
5
Inspect plant or machinery for operational serviceability
Verified
Key Learning Objectives:
- Know how to prepare for inspecting plant or machinery for operational serviceability.
- Be able to prepare for inspecting plant or machinery for operational serviceability.
- Know how to inspect plant or machinery for operational serviceability.
- Be able to inspect plant or machinery for operational serviceability.
- Know how to complete activities after inspecting plant or machinery for operational serviceability.
- Be able to complete activities after inspecting plant or machinery for operational serviceability.
6
Install plant or machinery
Verified
Key Learning Objectives:
- Know how to prepare for installing plant or machinery.
- Be able to prepare for installing plant or machinery.
- Know how to install plant or machinery.
- Be able to install plant or machinery.
- Know how to complete activities after installing plant or machinery.
- Be able to complete activities after installing plant or machinery.
7
Move, handle or store resources
Verified
Key Learning Objectives:
- Understand the requirements for working safely
- Know how to move and handle resources safely
- Know how to deal with problems and defects in the workplace, Move, handle or store occupational resources
8
Operate plant or machinery for non-operational maintenance activities
Verified
Key Learning Objectives:
- Know how to prepare for operating plant or machinery for non-operational maintenance activities.
- Be able to prepare for operating plant or machinery for non-operational maintenance activities.
- Know how to operate plant or machinery for non-operational maintenance activities.
- Be able to operate plant or machinery for non-operational maintenance activities.
9
Produce one-off components by bench fitting techniques
Verified
Key Learning Objectives:
- Know how to prepare for producing one-off components by bench fitting techniques.
- Be able to prepare for producing one-off components by bench fitting techniques.
- Know the procedures for producing one-off components by bench fitting techniques.
- Be able to follow procedures to produce one-off components by bench fitting techniques.
- Know how to complete activities after producing one-off components by bench fitting techniques.
- Be able to complete activities after producing one-off components by bench fitting techniques.
10
Remove and replace plant or machinery components
Verified
Key Learning Objectives:
- Know how to prepare for removing and replacing plant or machinery components.
- Be able to prepare for removing and replacing plant or machinery components.
- Know how to remove and replace plant or machinery components.
- Be able to remove and replace plant or machinery components.
- Understand the principles of power units.
- Understand the principles of transmissions.
- Understand the principles of braking systems.
- Understand the principles of steering and suspension systems.
- Understand the principles of hydraulic and pneumatic systems.
- Understand the principles of electrical systems.
- Understand the principles of small plant, tools and equipment.
- Know how to complete activities after removing and replacing plant or machinery components.
- Be able to complete activities after removing and replacing plant or machinery components.
11
Service plant or machinery
Verified
Key Learning Objectives:
- Know how to prepare for servicing plant or machinery.
- Be able to prepare for servicing plant or machinery.
- Know how to service plant or machinery.
- Be able to service plant or machinery.
- Know how to complete activities after servicing plant or machinery.
- Be able to complete activities after servicing plant or machinery.
12
Thermal cutting and joining materials
Verified
Key Learning Objectives:
- Know how to prepare for thermal cutting and joining materials.
- Be able to prepare for thermal cutting and joining materials.
- Know how to modify and cut materials by heating and thermal cutting.
- Know how to join materials by welding, brazing and soldering.
- Be able to produce components by thermal cutting and joining materials.
- Know how to complete activities after thermal cutting and joining materials.
- Be able to complete activities after thermal cutting and joining materials.
13
Undertake functional diagnostics of faults in plant or machinery
Verified
Key Learning Objectives:
- Know how to prepare for undertaking functional diagnostics of faults in plant or machinery.
- Be able to prepare for undertaking functional diagnostics of faults in plant or machinery.
- Know how to undertake functional diagnostics of faults in plant or machinery.
- Be able to undertake functional diagnostics of faults in plant or machinery.
- Know how to complete activities after undertaking functional diagnostics of faults in plant or machinery.
- Be able to complete activities after undertaking functional diagnostics of faults in plant or machinery.
14
Workplace health, safety and welfare
Verified
Key Learning Objectives:
- Understand health, safety and welfare requirements
- Understand the organisation’s approach to health, safety and welfare
- Understand risk control in the workplace, Confirm health and safety requirements in the workplace
- Work in accordance with health and safety requirements
Regulatory & Verification Details
- Qualification Number (QN)
- 601/3114/7
- Regulated Status
- Available to learners
- Awarding Body
- NOCN
- Qualification Type
- Vocationally-Related Qualification
- Operational Start
- Sept 2014