NOCN
Level 3
QN: 601/3115/9
Curriculum Active
NOCN Level 3 Diploma in Construction Plant or Machinery Maintenance (Construction)
Official qualification regulated by Ofqual, awarded by NOCN. Classified as a Vocationally-Related Qualification. Total guided learning hours: 680 hours.
Qualification Level
Level 3
Awarding Body
NOCN
Syllabus Units
12 Units
Guided Hours
680 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Advise on repair or replacement for plant or machinery
Verified
Key Learning Objectives:
- Know how to prepare to advise on repair or replacement for plant or machinery.
- Be able to prepare to advise on repair or replacement for plant or machinery.
- Know how to advise on repair or replacement for plant or machinery.
- Be able to advise on repair or replacement for plant or machinery.
- Know how to complete activities after advising on repair or replacement for plant or machinery.
- Be able to complete activities after advising on repair or replacement for plant or machinery.
2
Configure and hand over plant or machinery
Verified
Key Learning Objectives:
- Know how to prepare for configuring and handing over plant or machinery.
- Be able to prepare for configuring and handing over plant or machinery.
- Know how to configure and hand over plant or machinery.
- Be able to configure plant or machinery.
- Be able to hand over plant or machinery.
3
Confirm the occupational method of work
Verified
Key Learning Objectives:
- Understand project information
- Understand project requirements
- Select the method of work
4
Develop and maintain good working relationships
Verified
Key Learning Objectives:
- Know how to record information given to others
- Know how to develop working relationships
- Know how to provide information to others
- Know how to respond to information from others
- Communicate with others to develop and maintain working relationships
5
Diagnose faults in plant or machinery
Verified
Key Learning Objectives:
- Know how to prepare for diagnosing faults in plant or machinery.
- Be able to prepare for diagnosing faults in plant or machinery.
- Know how to diagnose faults in plant or machinery.
- Be able to diagnose faults in plant or machinery.
- Know how to complete activities after diagnosing faults in plant or machinery.
- Be able to complete activities after diagnosing faults in plant or machinery.
6
Install plant or machinery
Verified
Key Learning Objectives:
- Know how to prepare for installing plant or machinery.
- Be able to prepare for installing plant or machinery.
- Know how to install plant or machinery.
- Be able to install plant or machinery.
- Know how to complete activities after installing plant or machinery.
- Be able to complete activities after installing plant or machinery.
7
Manage work activities and resources
Verified
Key Learning Objectives:
- Know how to plan work activities
- Understand factors that impact on the work programme
- Manage the work activities and procedures
8
Operate plant or machinery for non-operational maintenance activities
Verified
Key Learning Objectives:
- Know how to prepare for operating plant or machinery for non-operational maintenance activities.
- Be able to prepare for operating plant or machinery for non-operational maintenance activities.
- Know how to operate plant or machinery for non-operational maintenance activities.
- Be able to operate plant or machinery for non-operational maintenance activities.
9
Plan and carry out servicing to maintain plant or machinery
Verified
Key Learning Objectives:
- Know how to prepare to plan and carry out servicing to maintain plant or machinery.
- Be able to prepare to plan and carry out servicing to maintain plant or machinery.
- Know how to plan and carry out servicing to maintain plant or machinery.
- Be able to plan and carry out servicing to maintain plant or machinery.
- Know how to complete activities after servicing and maintaining plant or machinery.
- Be able to complete activities after servicing and maintaining plant or machinery.
10
Produce one-off components by bench fitting techniques
Verified
Key Learning Objectives:
- Know how to prepare for producing one-off components by bench fitting techniques.
- Be able to prepare for producing one-off components by bench fitting techniques.
- Know the procedures for producing one-off components by bench fitting techniques.
- Be able to follow procedures to produce one-off components by bench fitting techniques.
- Know how to complete activities after producing one-off components by bench fitting techniques.
- Be able to complete activities after producing one-off components by bench fitting techniques.
11
Provide users of plant or machinery with technical information, advice and guidance
Verified
Key Learning Objectives:
- Know how to prepare for providing users of plant or machinery with technical information, advice and guidance.
- Be able to prepare for providing users of plant or machinery with technical information, advice and guidance.
- Know how to provide users of plant or machinery with technical information, advice and guidance.
- Be able to provide users of plant or machinery with technical information, advice and guidance.
- Know how to complete activities after providing users of plant or machinery with technical information, advice and guidance.
- Be able to complete activities after providing users of plant or machinery with technical information, advice and guidance.
12
Thermal cutting and joining materials
Verified
Key Learning Objectives:
- Know how to prepare for thermal cutting and joining materials.
- Be able to prepare for thermal cutting and joining materials.
- Know how to modify and cut materials by heating and thermal cutting.
- Know how to join materials by welding, brazing and soldering.
- Be able to produce components by thermal cutting and joining materials.
- Know how to complete activities after thermal cutting and joining materials.
- Be able to complete activities after thermal cutting and joining materials.
Regulatory & Verification Details
- Qualification Number (QN)
- 601/3115/9
- Regulated Status
- Available to learners
- Awarding Body
- NOCN
- Qualification Type
- Vocationally-Related Qualification
- Operational Start
- Sept 2014