NOCN
Level 3
QN: 603/5463/X
Curriculum Active
NOCN Level 3 NVQ Diploma in Wall And Floor Tiling (Construction)
Official qualification regulated by Ofqual, awarded by NOCN. Classified as a Occupational Qualification. Total guided learning hours: 586 hours.
Qualification Level
Level 3
Awarding Body
NOCN
Syllabus Units
11 Units
Guided Hours
586 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Confirming the Occupational Method of Work in the Workplace
Verified
Key Learning Objectives:
- Assess available project data accurately to determine the occupational method of work., Obtain additional information from alternative sources in cases where the available project data is insufficient.
- Identify work methods that will make best use of resources and meet project, statutory and contractual requirements., Confirm and communicate the selected work method to relevant personnel.
2
Confirming Work Activities and Resources for an Occupational Work Area in the Workplace
Verified
Key Learning Objectives:
- Identify work activities
- assess required resources and plan the sequence of work., Obtain clarification and advice where the resources required are not available.
- Evaluate the work activities and the requirements of any significant external factors against the project requirements.
- Identify work activities which influence each other and make the best use of theresources available.
- Identify changed circumstances that require alterations to the work programme and justify them to decision makers.
3
Conforming to General Health, Safety and Welfare in the Workplace.
Verified
Key Learning Objectives:
- Comply with all workplace health, safety and welfare legislation requirements.
- Recognise hazards associated with the workplace that have not been previously controlled and report them in accordance with organisational procedures.
- Comply with organisational policies and procedures to contribute to health, safety and welfare.
- Work responsibly to contribute to workplace health, safety and welfare whilst carrying out work in the relevant occupational area.
- Comply with and support all organisational security arrangements and approved procedures.
4
Developing and maintaining good occupational working relationships in the workplace
Verified
Key Learning Objectives:
- maintain and encourage working relationships to promote good will and trust.2. Inform relevant people about work activities in an appropriate level of detail, with the appropriate level of urgency.3. Offer advice and help to relevant people about work activities and encourage questions/requests for clarification and comments.4. Clarify proposals with relevant people and discuss alternative suggestions.5. Re
- solve differences of opinion in ways that minimise offence and maintain goodwill, trust and respect.
5
Laying sand and cement screeds in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when laying sand and cement screeds.
- Know how to comply with relevant legislation and official guidance when laying sand and cement screeds.
- Maintain safe and healthy working practices when laying sand and cement screeds.
- Select the required quantity and quality of resources for the methods of work to lay sand and cement screeds., Minimise the risk of damage to the work and surrounding area when laying sand and cement screeds.
- Complete the work within the allocated time when laying sand and cement screeds.
- Comply with the given contract information to lay sand and cement screeds to the required specification.
6
Laying under tile heating systems and tiling surfaces in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when laying under tile heating systems and tiling surfaces.2.
- Know how to comply with relevant legislation and official guidance when laying under tile heating systems and tiling surfaces.3.
- Maintain safe and healthy working practices when laying under tile heating systems and tiling surfaces.4.
- Select the required quantity and quality of resources for the methods of work to lay under tile heating systems and tiling surfaces.5. Minimise the risk of damage to the work and surrounding area when laying under tile heating systems and tiling surfaces.6.
- Complete the work within the allocated time when laying under tile heating systems and tiling surfaces.7.
- Comply with the given contract information to lay under tile heating systems and tiling surfaces to the required specification.
7
Preparing backgrounds for tiling in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when preparing backgrounds for tiling.2.
- Know how to comply with relevant legislation and official guidance when preparing backgrounds for tiling.3.
- Maintain safe and healthy working practices when preparing backgrounds for tiling.4.
- Select the required quantity and quality of resources for the methods of work to prepare backgrounds for tiling.5. Minimise the risk of damage to the work and surrounding area when preparing backgrounds for tiling.6.
- Complete the work within the allocated time when preparing backgrounds for tiling.7.
- Comply with the given contract information to prepare backgrounds for tiling to the required specification.
8
Producing complex ceramic, mosaic and stone surface finishes in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing complex ceramic, mosaic and stone surface finishes.2.
- Know how to comply with relevant legislation and official guidance when producing complex ceramic, mosaic and stone surface finishes.3.
- Maintain safe and healthy working practices when producing complex ceramic, mosaic and stone surface finishes.4.
- Select the required quantity and quality of resources for the methods of work to produce complex ceramic, mosaic and stone surface finishes.5. Minimise the risk of damage to the work and surrounding area when producing complex ceramic, mosaic and stone surface finishes.6.
- Complete the work within the allocated time when producing complex ceramic, mosaic and stone surface finishes.7.
- Comply with the given contract information to produce complex ceramic, mosaic and stone surface finishes to the required specification.
9
Producing internal and external sand and cement backgrounds in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing internal and external sand and cement backgrounds.2.
- Know how to comply with relevant legislation and official guidance when producing internal and external sand and cement backgrounds.3.
- Maintain safe and healthy working practices when producing internal and external sand and cement backgrounds.4.
- Select the required quantity and quality of resources for the methods of work to produce internal and external sand and cement backgrounds.5. Minimise the risk of damage to the work and surrounding area when producing internal and external sand and cement backgrounds.6.
- Complete the work within the allocated time when producing internal and external sand and cement backgrounds.7.
- Comply with the given contract information to produce internal and external sand and cement backgrounds to the required specification.
10
Providing drainage for tiled surfaces in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when providing drainage for tiled surfaces.2.
- Know how to comply with relevant legislation and official guidance when providing drainage for tiled surfaces.3.
- Maintain safe and healthy working practices when providing drainage for tiled surfaces.4.
- Select the required quantity and quality of resources for the methods of work to provide drainage for tiled surfaces.5. Minimise the risk of damage to the work and surrounding area when providing drainage for tiled surfaces.6.
- Complete the work within the allocated time when providing drainage for tiled surfaces.7.
- Comply with the given contract information to provide drainage for tiled surfaces to the required specification.
11
Tiling wall and floor surfaces in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when tiling wall and floor surfaces.2.
- Know how to comply with relevant legislation and official guidance when tiling wall and floor surfaces.3.
- Maintain safe and healthy working practices when tiling wall and floor surfaces.4.
- Select the required quantity and quality of resources for the methods of work to tile wall and floor surfaces.5. Minimise the risk of damage to the work and surrounding area when tiling wall and floor surfaces.6.
- Complete the work within the allocated time when tiling wall and floor surfaces.7.
- Comply with the given contract information to tile wall and floor surfaces to the required specification.
Regulatory & Verification Details
- Qualification Number (QN)
- 603/5463/X
- Regulated Status
- Available to learners
- Awarding Body
- NOCN
- Qualification Type
- Occupational Qualification
- Operational Start
- Aug 2020