OCNLR
    Level 1
    QN: 603/2666/9
    Curriculum Active

    OCNLR Level 1 Award in Skills for Professions in Construction and Engineering

    Official qualification regulated by Ofqual, awarded by OCNLR. Classified as a Vocationally-Related Qualification. Total guided learning hours: 2088 hours.

    Qualification Level
    Level 1
    Awarding Body
    OCNLR
    Syllabus Units
    78 Units
    Guided Hours
    2088 hrs
    Instant access to interactive lessons, quizzes, and spaced revision.

    Course Syllabus & Study Modules

    Complete breakdown of verified curriculum topics and learning objectives.

    1

    Basic Blocklaying

    Verified
    Key Learning Objectives:
    • Be able to prepare to build block walling to the given instruction and specification.
    • Be able to set out for block walling to the given specification.
    • Be able to build block walling using dense concrete and lightweight insulation blocks to the given specification.
    2

    Basic Electrical Practices

    Verified
    Key Learning Objectives:
    • Know about hazards that may occur when using electricity.
    • Be able to safely terminate flexible cords and cables.
    • Know how to carry out insulation and conductance tests.
    • Be able to prepare electrical boxes to receive cables.
    3

    Blocklaying Principles

    Verified
    Key Learning Objectives:
    • Know how to prepare to build block walling
    • Know how to set out the work area to build block walling
    • Know how to build block walling using dense concrete and lightweight insulation blocks
    4

    Bricklaying Principles

    Verified
    Key Learning Objectives:
    • Know how to prepare to build brick walling
    • Know how to build straight brick walling and return corners in half brick stretcher bond
    • Know how to build straight brick walling and return corners in one brick walling
    5

    Bricklaying Skills

    Verified
    Key Learning Objectives:
    • Be able to prepare for bricklaying.
    • Be able to prepare bricks for laying.
    • Be able to build a small wall in blocks.
    • Be able to leave work area clean and tidy.
    6

    Carpentry Hand Skills

    Verified
    Key Learning Objectives:
    • Know about hand tools used in carpentry.
    • Be able to use face and edge marks.
    • Be able to saw to a line.
    • Be able to plane timber.
    • Be able to use a chisel.
    • Be able to work safely.
    7

    Carrying Out an Engineering Project

    Verified
    Key Learning Objectives:
    • Be able to identify and select an engineering project.
    • Be able to carry out research for an engineering project.
    • Be able to undertake activity to complete an engineering project.
    • Be able to present an engineering project.
    • Be able to assess project outcomes and own performance.
    8

    Carrying out Dry Lining Operations

    Verified
    Key Learning Objectives:
    • Be able to observe good health and safety practice whilst carrying out a dry lining task.
    • Be able to carry out a dry lining task according to a plan.
    • Be able to work with materials and tools safely and effectively when carrying out a dry lining task.
    9

    Carrying Out Painting and Decorating Operations

    Verified
    Key Learning Objectives:
    • Know health and safety legislation relevant to painting and decorating.
    • Be able to prepare surfaces to receive painting and decorating systems.
    • Be able to apply painting and decorating systems to walls.
    10

    Collaborative Working Using Digital Technology

    Verified
    Key Learning Objectives:
    • Be able to prepare collaborative technologies for use.2.
    • Be able to use collaborative technology safely and securely.3.
    • Be able to contribute to tasks using collaborative technologies.
    11

    Construct a Timber Product

    Verified
    Key Learning Objectives:
    • Know tools required to construct a timber product.
    • Be able to select and prepare materials needed to construct the product.
    • Be able to identify and measure timber components.
    • Be able to prepare joints.
    • Be able to fit joints together.
    • Be able to assemble the product.
    • Be able to clean up the product using a plane.
    • Be able to work safely and efficiently.
    12

    Constructing a Cavity Wall Using Bricklaying Skills

    Verified
    Key Learning Objectives:
    • Be able to prepare for constructing a cavity wall.
    • Be able to demonstrate skills and techniques used in constructing a cavity wall.
    • Be able to construct a cavity wall.
    • Be able to leave work area clean and tidy.
    13

    Constructing a Half Brick Wall Using Bricklaying Skills

    Verified
    Key Learning Objectives:
    • Be able to prepare for constructing a half brick wall.
    • Be able to demonstrate skills and techniques used in constructing half brick wide walls.
    • Be able to construct a half brick wall.
    • Be able to leave work area clean and tidy.
    14

    Constructing a One Brick Wide Wall Using Bricklaying Skills

    Verified
    Key Learning Objectives:
    • Be able to prepare for constructing a one brick wide wall.
    • Be able to demonstrate skills and techniques used in constructing one brick wide walls.
    • Be able to construct a one brick wide wall.
    • Be able to leave work area clean and tidy.
    15

    Developing Flooring Skills

    Verified
    Key Learning Objectives:
    • Know the terms used in flooring.
    • Know the resources required to carry out flooring operations.
    • Be able to produce flooring joints.
    16

    Developing Hand Plane Skills

    Verified
    Key Learning Objectives:
    • Know the hand tools required to plane timber.
    • Be able to plane timber.
    17

    Developing Rendering Skills

    Verified
    Key Learning Objectives:
    • Know the resources required to render block
    • Be able to prepare a background surface.
    • Be able to apply render to surfaces.
    • Be able to clean up on completion.
    18

    Developing Skills In Assembling Mechanical Components

    Verified
    Key Learning Objectives:
    • Be able to prepare a work area for assembly operations.
    • Be able to carry out assembly operations.
    19

    Developing Skills In Electronic Assembly

    Verified
    Key Learning Objectives:
    • Be able to prepare for an electronic assembly activity.
    • Be able to assemble electronic components correctly and safely.
    20

    Developing Skills in Joining Materials using Welding

    Verified
    Key Learning Objectives:
    • Be able to prepare a work area in readiness for welding operations.
    • Be able to produce welded joints to the required standard.
    21

    Developing Skills in Making Engineering Components Using Hand Tools

    Verified
    Key Learning Objectives:
    • Be able to prepare a work area for hand cutting and shaping activities.
    • Be able to produce components using hand tools safely.
    22

    Developing Skills in Planning and Making a Machined Product

    Verified
    Key Learning Objectives:
    • Know about equipment, tooling and materials required to make machined products.
    • Be able to use simple engineering drawings.
    • Be able to prepare a work area for producing a machined product.
    • Be able to make an engineered product to a specification.
    23

    Developing Skills in Routine Servicing of an Electrical/Electronic System

    Verified
    Key Learning Objectives:
    • Know about routine electrical/electronic servicing operations.
    • Be able to service electrical/electronic equipment and systems safely.<br&#62
    24

    Developing Skills in Routine Servicing of Mechanical Equipment

    Verified
    Key Learning Objectives:
    • Know about routine mechanical servicing operations.
    • Be able to service mechanical equipment safely.
    25

    Developing Skills In Using A Bench/Pedestal Drilling Machine

    Verified
    Key Learning Objectives:
    • Be able to prepare a work area for producing components using a bench/pedestal drilling machine.
    • Be able to safely carry out drilling activities using a bench/pedestal drilling machine.
    26

    Developing Skills In Wiring Electrical Circuits And Components

    Verified
    Key Learning Objectives:
    • Be able to prepare for and carry out an electrical wiring activity.
    • Be able to wire and terminate electrical components correctly and safely.
    27

    Digital Content Creation – Audio and Video

    Verified
    Key Learning Objectives:
    • Be able to design a digital publication.2.
    • Be able to input audio and video material elements within a rich media publication design.3.
    • Be able to format and produce a rich media digital publication.
    28

    Digital Content Creation – Text and Image

    Verified
    Key Learning Objectives:
    • Be able to design a digital publication that includes text and images.2.
    • Be able to input text and combine with other digital media within a publication design.3.
    • Be able to edit, format and produce a digital publication.
    29

    Drilling and Fixing Components in Plumbing

    Verified
    Key Learning Objectives:
    • Be able to prepare for drilling and fixing components.
    • Be able to drill and fix components to different wall surfaces.
    • Be able to leave work area clean and tidy.
    30

    Environmental Awareness in Construction

    Verified
    Key Learning Objectives:
    • Know about environmental issues affecting the construction industry.
    • Know renewable technologies and energy conservation methods in buildings.
    • Know the importance of good waste management.
    31

    Environmental Issues

    Verified
    Key Learning Objectives:
    • Know ways that people affect theenvironment.2.
    • Understand the actions that peoplecan take to benefit theenvironment.3.
    • Know different ways to reducetheir carbon footprint.
    32

    Ethical and Political Issues Relating to Land-Based Activities

    Verified
    Key Learning Objectives:
    • Be able to identify an ethical/ political issue relating to horticulture, environmental conservation or animal care.2.
    • Be able to research the issue identified.3.
    • Be able to present arguments or aspects of the differing views researched.4.
    • Be able to explain their own views in relation to the issue.
    33

    Exploring Careers in the Green Industries

    Verified
    Key Learning Objectives:
    • Know about the green industries that offer career opportunities.2.
    • Understand the range of employment opportunities available in green industries.
    34

    First and Second Fix Carpentry Skills

    Verified
    Key Learning Objectives:
    • Understand the differences between first and second fix carpentry.
    • Know relevant tools and equipment used in first and second fix carpentry.
    • Know how to use a range of carpentry fixing devices.
    • Be able to carry out first fix set tasks.
    • Be able to carry out second fix set tasks.
    35

    Fitting Units for Interiors

    Verified
    Key Learning Objectives:
    • Know how to interpret information.
    • Know how to fix and fit furniture components in location.
    • Know how to check the final fitting of an interior.
    • Understand the ways of working that ensure their own and other's safety.
    36

    Fix and Fit Work Surfaces

    Verified
    Key Learning Objectives:
    • Know how to interpret information
    • Be able to check the work area is ready for positioning the work surface/s
    • Be able to secure work surface/s in position
    37

    Fix Construction Components

    Verified
    Key Learning Objectives:
    • Be able to prepare to fix construction components.
    • Be able to fix construction components.
    • Be able to restore work area after work has been completed.
    38

    Global Warming and Climate Change

    Verified
    Key Learning Objectives:
    • Understand what is meant by ‘global warming’ and ‘climate change’.2.
    • Understand the causes of global warming and climate change.3.
    • Understand the impact of global warming and climate change on the environment.4.
    • Know about local, national and international action regarding climate change.
    • Understand how to reduce personal impact on climate change.
    39

    Health and Safety in a Practical Environment

    Verified
    Key Learning Objectives:
    • Know the Health and Safety requirements relevant to their work environment.
    • Be able to recognise risks in their work environment.
    40

    Improving Personal Productivity

    Verified
    Key Learning Objectives:
    • Be able to plan the use of digital software to improve productivity.2.
    • Be able to use digital systems and software efficiently to complete planned tasks.3.
    • Be able to review the selection and use of digital tools to make sure that work activities are successful.4.
    • Be able to use digital tools to improve personal productivity and time management.
    41

    Installing Rainwater Systems

    Verified
    Key Learning Objectives:
    • Know the tools used for installing rainwater systems.
    • Know the materials and components used in installing rainwater systems.
    • Be able to use access equipment.
    • Be able to install a rainwater system.
    • Understand the safety precautions that are needed when working at height.
    • Be able to maintain tools and the working area.
    42

    Introduction to Basic Mathematics and Science used in Engineering

    Verified
    Key Learning Objectives:
    • Demonstrate how mathematics is applied in solving engineering problems.
    • Demonstrate how science is applied in solving engineering problems.
    43

    Introduction to Building and Construction

    Verified
    Key Learning Objectives:
    • Know the structure and working patterns of the Building and Construction industry.
    • Know about different types of career opportunities available in the Building and Construction industry.
    • Be able to develop and demonstrate an appropriate skill in the Building and Construction industry.
    44

    Introduction to Engineering Tools, Equipment and Materials

    Verified
    Key Learning Objectives:
    • Be able to work safely with tools, equipment and materials in an engineering environment.
    • Be able to use and maintain hand tools for engineering maintenance operations.
    • Be able to use and maintain power tools for engineering maintenance operations.
    • Be able to use equipment for engineering maintenance operations.
    • Be able to use materials when carrying out engineering operations.
    45

    Introduction to Machining Engineering Materials

    Verified
    Key Learning Objectives:
    • Identify different machining methods.
    • Prepare for machining activities.
    • Carry out machining activities.
    • Identify that machining activities are carried out correctly.
    46

    Introduction to Programming

    Verified
    Key Learning Objectives:
    • Be able to use variables in computer programming.2.
    • Be able to use sequencing in computer programming.3.
    • Be able to use repetition/iteration in computer programming.4.
    • Be able to use Boolean expressions in computer programming.5.
    • Be able to use selection in computer programming.6.
    • Be able to plan
    • create and debug a simple computer program.
    47

    Introduction to Skimming Techniques

    Verified
    Key Learning Objectives:
    • Know the tools and equipment used for skimming.
    • Know the materials used in skimming.
    • Be able to mix plaster for skimming.
    • Know which background surfaces are suitable to receive a skim coat.
    • Be able to carry out the preparations required for the application of skim coats.
    48

    Introduction to Study Skills

    Verified
    Key Learning Objectives:
    • Understand how to develop personal learning skills.
    • Understand and use information.
    • Be able to plan
    • manage, and produce work.
    49

    Introduction to Sustainability

    Verified
    Key Learning Objectives:
    • Know the basic concepts of sustainability.2.
    • Know the importance of natural resources.3.
    • Understand key challenges to sustainability in the world.
    50

    Investigate an Environmental Issue

    Verified
    Key Learning Objectives:
    • Understand sources relating to an environmental issue.2.
    • Understand the causes of the issue.3.
    • Know how the issue impacts on the environment.4.
    • Understand ways the issue is being, or could be, addressed.
    51

    Know How to Maintain and Use Carpentry and Joinery Hand Tools

    Verified
    Key Learning Objectives:
    • Know how to maintain and store carpentry and joinery hand tools.
    • Know how to use carpentry and joinery handsaws.
    • Know how to use carpentry and joinery hand-held planes.
    • Know how to use carpentry and joinery hand-held drills.
    • Know how to use woodworking chisels.
    52

    Lay Paving Slabs

    Verified
    Key Learning Objectives:
    • Know how to lay paving slabs.
    • Be able to lay paving slabs.
    • Be able to work with materials and tools safely and effectively when laying paving slabs.
    53

    Maintenance of Plumbing Systems

    Verified
    Key Learning Objectives:
    • Know the general maintenance requirements applicable to plumbing installations.
    • Be able to carry out routine maintenance tasks on plumbing systems and components.
    • Be able to leave work area clean and tidy.
    54

    Measuring and Marking Out of Plumbing Materials

    Verified
    Key Learning Objectives:
    • Be able to prepare for measuring and marking out.
    • Be able to mark and measure out a range of components.
    • Be able to estimate material requirements according to measurements.
    • Be able to leave work area clean and tidy.
    55

    Mix Mortar or Concrete

    Verified
    Key Learning Objectives:
    • Know how to mix mortar or concrete.
    • Be able to mix mortar or concrete.
    • Be able to work with materials and tools safely and effectively when mixing mortar or concrete.
    56

    Plastering Techniques

    Verified
    Key Learning Objectives:
    • Be able to prepare for plastering.
    • Know skills and techniques used in plastering.
    • Be able to plaster.
    • Be able to leave work area clean and tidy.
    57

    Practical Skills for Footpath and Surfacing Work

    Verified
    Key Learning Objectives:
    • Be able to lay a path
    • Be able to maintain footpaths
    58

    Prepare and Use Carpentry and Joinery Portable Power Tools

    Verified
    Key Learning Objectives:
    • Be able to maintain and store carpentry and joinery portable power tools.
    • Be able to use carpentry and joinery portable power tools to cut, shape and finish.
    • Be able to use carpentry and joinery portable power tools to drill and insert fastenings.
    59

    Prepare to Set out Construction Components

    Verified
    Key Learning Objectives:
    • Be able to prepare to set out construction components.
    • Be able to set out construction components.
    • Be able to restore work area after work has been completed.
    60

    Preparing Ceilings and Walls for Decoration

    Verified
    Key Learning Objectives:
    • Know how to remove a decorative covering from a ceiling/wall area.
    • Prepare the ceiling/wall for decoration.
    • Be able to leave work area clean and tidy.
    61

    Produce Basic Woodworking Joints

    Verified
    Key Learning Objectives:
    • Be able to use hand tools to produce basic woodworking joints
    • Be able to select and store materials used to produce basic woodworking joints
    • Be able to mark out to basic woodworking joints
    62

    Project in Sustainability

    Verified
    Key Learning Objectives:
    • Be able to plan a project to promote sustainability in a chosen environment.
    • Be able to undertake a sustainability project.
    • Be able to present the results of a sustainability project.
    • Be able to reflect on the sustainability project.
    63

    Retrofit Installation Systems

    Verified
    Key Learning Objectives:
    • Know the hand tools required to install energy efficiency products.
    • Understand the use of energy efficiency products.
    • Be able to install energy efficiency products.
    • Understand health and safety issues related to energy efficiency products.
    64

    Starting Work in Construction

    Verified
    Key Learning Objectives:
    • Know about different types of career opportunities available in construction.
    • Know about different types of organisations offering different career opportunities in construction.
    • Understand how career choices can impact upon an individual’s lifestyle.
    • Be able to work responsibly with others.
    • Be able to seek and respond to guidance when working as part of a team.
    65

    Starting Work in Engineering

    Verified
    Key Learning Objectives:
    • Know about the different types of career opportunities in engineering.
    • Know about the different types of organisation offering career opportunities in engineering.
    • Understand how career choices can impact on an individual’s lifestyle.
    • Be able to make informed career choices.
    • Be able to work responsibly with others.
    • Be able to seek, and respond to, guidance when working as part of a team.
    66

    Supporting Sustainability in an Office Environment

    Verified
    Key Learning Objectives:
    • Know how to support sustainability in an office environment.2.
    • Be able to support sustainability in an office environment.
    67

    Sustainability Issues in Industry

    Verified
    Key Learning Objectives:
    • Know about sustainability issues in a chosen sector or industry.2.
    • Know how sustainability can be improved in a specific sector or industry.
    68

    Understand how to introduce energy efficient measures to potential customers

    Verified
    Key Learning Objectives:
    • Understand how to plan the introduction of energy efficiency improvements.
    • Understand how to communicate energy efficiency priorities.
    69

    Understanding and Using 2D Shapes

    Verified
    Key Learning Objectives:
    • Understand the properties of 2D shapes.
    • Be able to use the properties of 2D shapes to solve problems.
    • Be able to read and record angles in degrees.
    • Be able to measure and record angles in degrees.
    70

    Understanding the Use of Power Tools

    Verified
    Key Learning Objectives:
    • Be able to identify power tools and their use.
    • Be able to identify a range of power tool accessories.
    • Be able to use power tools safely.
    71

    Use of Tools and Equipment in Bricklaying

    Verified
    Key Learning Objectives:
    • Know the main tools and materials used in bricklaying.
    • Be able to use tools and materials for bricklaying.
    • Be able to leave work area clean and tidy.
    72

    Using Decorative Paint Effects for Interior Walls

    Verified
    Key Learning Objectives:
    • Be able to conform to Health and Safety requirements associated with decorative paints and glazes.
    • Be able to prepare work area for tasks.
    • Know how to produce decorative effects.
    • Be able to store materials, tools and equipment safely.
    • Be able to re-instate work area.
    73

    Using Floor and Wall Tiling Techniques

    Verified
    Key Learning Objectives:
    • Know the main tools and materials used in floor and wall tiling.
    • Be able to prepare for floor and wall tiling.
    • Be able to use tools, materials and techniques in floor and wall tiling.
    • Be able to leave work area clean and tidy.
    74

    Using Painting Skills for Interior Ceilings and Walls

    Verified
    Key Learning Objectives:
    • Be able to prepare for painting.
    • Be able to use tools, materials and techniques for painting.
    • Be able to leave work area clean and tidy.
    75

    Using Plastering Skills – Floating Coat to an Attached Pier

    Verified
    Key Learning Objectives:
    • Be able to prepare for applying a floating coat to an attached pier.
    • Be able to apply a floating coat to an attached pier according to requirements.
    • Be able to leave work area clean and tidy.
    76

    Using Plastering Skills – Plastering to a Window Reveal

    Verified
    Key Learning Objectives:
    • Be able to prepare for plastering to a window reveal.
    • Be able to plaster to a window reveal according to requirements.
    • Be able to leave work area clean and tidy.
    77

    Wallpapering Skills

    Verified
    Key Learning Objectives:
    • Be able to select equipment and materials for wallpapering.
    • Be able to plan and prepare for the wallpapering task.
    • Be able to wallpaper.
    • Be able to maintain tools and the working area.
    78

    Working Safely in Engineering

    Verified
    Key Learning Objectives:
    • Know about health and safety in the workplace.
    • Know about accident and emergency procedures.
    • Know how to work safely in an engineering environment.
    • Be able to apply safe working practices and procedures.

    Regulatory & Verification Details

    Qualification Number (QN)
    603/2666/9
    Regulated Status
    Available to learners
    Awarding Body
    OCNLR
    Qualification Type
    Vocationally-Related Qualification
    Operational Start
    Dec 2017

    Cookies on MasteryMind

    Essential cookies keep you signed in.

    Analytics and advertising cookies stay off unless you accept.

    Read our Privacy Policy.