Pearson
Level 1/Level 2
QN: 601/0545/8
Curriculum Active
Pearson BTEC Level 1/Level 2 First Diploma in Engineering
Official qualification regulated by Ofqual, awarded by Pearson. Classified as a Vocationally-Related Qualification. Total guided learning hours: 1680 hours.
Qualification Level
Level 1/Level 2
Awarding Body
Pearson
Syllabus Units
35 Units
Guided Hours
1680 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Application of Quality Control and Measurement in Engineering
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Application of Quality Control and Measurement in Engineering
- Apply practical skills, procedures and techniques in Application of Quality Control and Measurement in Engineering
- Evaluate performance, standards and best practices for Application of Quality Control and Measurement in Engineering
2
Bicycle Servicing and Maintenance
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Bicycle Servicing and Maintenance
- Apply practical skills, procedures and techniques in Bicycle Servicing and Maintenance
- Evaluate performance, standards and best practices for Bicycle Servicing and Maintenance
3
Casting Techniques
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Casting Techniques
- Apply practical skills, procedures and techniques in Casting Techniques
- Evaluate performance, standards and best practices for Casting Techniques
4
Computer Numerical Control Programming
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Computer Numerical Control Programming
- Apply practical skills, procedures and techniques in Computer Numerical Control Programming
- Evaluate performance, standards and best practices for Computer Numerical Control Programming
5
Computer-aided Engineering
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Computer-aided Engineering
- Apply practical skills, procedures and techniques in Computer-aided Engineering
- Evaluate performance, standards and best practices for Computer-aided Engineering
6
Continuous Improvement and Problem-Solving
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Continuous Improvement and Problem-Solving
- Apply practical skills, procedures and techniques in Continuous Improvement and Problem-Solving
- Evaluate performance, standards and best practices for Continuous Improvement and Problem-Solving
7
Electrical and Mechanical Science for Engineering
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Electrical and Mechanical Science for Engineering
- Apply practical skills, procedures and techniques in Electrical and Mechanical Science for Engineering
- Evaluate performance, standards and best practices for Electrical and Mechanical Science for Engineering
8
Electronic Circuit Design and Construction
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Electronic Circuit Design and Construction
- Apply practical skills, procedures and techniques in Electronic Circuit Design and Construction
- Evaluate performance, standards and best practices for Electronic Circuit Design and Construction
9
Electronic Devices and Communication Applications
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Electronic Devices and Communication Applications
- Apply practical skills, procedures and techniques in Electronic Devices and Communication Applications
- Evaluate performance, standards and best practices for Electronic Devices and Communication Applications
10
Engineering Assembly
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Engineering Assembly
- Apply practical skills, procedures and techniques in Engineering Assembly
- Evaluate performance, standards and best practices for Engineering Assembly
11
Engineering Design
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Engineering Design
- Apply practical skills, procedures and techniques in Engineering Design
- Evaluate performance, standards and best practices for Engineering Design
12
Engineering Maintenance
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Engineering Maintenance
- Apply practical skills, procedures and techniques in Engineering Maintenance
- Evaluate performance, standards and best practices for Engineering Maintenance
13
Engineering Marking Out
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Engineering Marking Out
- Apply practical skills, procedures and techniques in Engineering Marking Out
- Evaluate performance, standards and best practices for Engineering Marking Out
14
Engineering Materials
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Engineering Materials
- Apply practical skills, procedures and techniques in Engineering Materials
- Evaluate performance, standards and best practices for Engineering Materials
15
Fabrication Techniques
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Fabrication Techniques
- Apply practical skills, procedures and techniques in Fabrication Techniques
- Evaluate performance, standards and best practices for Fabrication Techniques
16
Health and Safety in Engineering
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Health and Safety in Engineering
- Apply practical skills, procedures and techniques in Health and Safety in Engineering
- Evaluate performance, standards and best practices for Health and Safety in Engineering
17
Interpreting and Using Engineering Information
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Interpreting and Using Engineering Information
- Apply practical skills, procedures and techniques in Interpreting and Using Engineering Information
- Evaluate performance, standards and best practices for Interpreting and Using Engineering Information
18
Introduction to Communications for Engineering
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Introduction to Communications for Engineering
- Apply practical skills, procedures and techniques in Introduction to Communications for Engineering
- Evaluate performance, standards and best practices for Introduction to Communications for Engineering
19
Investigating an Engineered Product
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Investigating an Engineered Product
- Apply practical skills, procedures and techniques in Investigating an Engineered Product
- Evaluate performance, standards and best practices for Investigating an Engineered Product
20
Machining Techniques
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Machining Techniques
- Apply practical skills, procedures and techniques in Machining Techniques
- Evaluate performance, standards and best practices for Machining Techniques
21
Mathematics for Engineering
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Mathematics for Engineering
- Apply practical skills, procedures and techniques in Mathematics for Engineering
- Evaluate performance, standards and best practices for Mathematics for Engineering
22
Operating an Efficient Workplace
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Operating an Efficient Workplace
- Apply practical skills, procedures and techniques in Operating an Efficient Workplace
- Evaluate performance, standards and best practices for Operating an Efficient Workplace
23
Operation and Maintenance of Electrical Systems and Components
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Operation and Maintenance of Electrical Systems and Components
- Apply practical skills, procedures and techniques in Operation and Maintenance of Electrical Systems and Components
- Evaluate performance, standards and best practices for Operation and Maintenance of Electrical Systems and Components
24
Operation and Maintenance of Electronic Systems and Components
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Operation and Maintenance of Electronic Systems and Components
- Apply practical skills, procedures and techniques in Operation and Maintenance of Electronic Systems and Components
- Evaluate performance, standards and best practices for Operation and Maintenance of Electronic Systems and Components
25
Operation and Maintenance of Fluid Power Systems and Components
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Operation and Maintenance of Fluid Power Systems and Components
- Apply practical skills, procedures and techniques in Operation and Maintenance of Fluid Power Systems and Components
- Evaluate performance, standards and best practices for Operation and Maintenance of Fluid Power Systems and Components
26
Operation and Maintenance of Mechanical Systems and Components
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Operation and Maintenance of Mechanical Systems and Components
- Apply practical skills, procedures and techniques in Operation and Maintenance of Mechanical Systems and Components
- Evaluate performance, standards and best practices for Operation and Maintenance of Mechanical Systems and Components
27
PC Software and Hardware in Engineering
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of PC Software and Hardware in Engineering
- Apply practical skills, procedures and techniques in PC Software and Hardware in Engineering
- Evaluate performance, standards and best practices for PC Software and Hardware in Engineering
28
Preparing and Controlling Engineering Manufacturing Operations
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Preparing and Controlling Engineering Manufacturing Operations
- Apply practical skills, procedures and techniques in Preparing and Controlling Engineering Manufacturing Operations
- Evaluate performance, standards and best practices for Preparing and Controlling Engineering Manufacturing Operations
29
Production Planning for Engineering
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Production Planning for Engineering
- Apply practical skills, procedures and techniques in Production Planning for Engineering
- Evaluate performance, standards and best practices for Production Planning for Engineering
30
Sustainable Vehicle Power and Structure Design
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Sustainable Vehicle Power and Structure Design
- Apply practical skills, procedures and techniques in Sustainable Vehicle Power and Structure Design
- Evaluate performance, standards and best practices for Sustainable Vehicle Power and Structure Design
31
The Engineered World
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of The Engineered World
- Apply practical skills, procedures and techniques in The Engineered World
- Evaluate performance, standards and best practices for The Engineered World
32
Vehicle Electrical Systems
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Vehicle Electrical Systems
- Apply practical skills, procedures and techniques in Vehicle Electrical Systems
- Evaluate performance, standards and best practices for Vehicle Electrical Systems
33
Vehicle Engines and Other Systems
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Vehicle Engines and Other Systems
- Apply practical skills, procedures and techniques in Vehicle Engines and Other Systems
- Evaluate performance, standards and best practices for Vehicle Engines and Other Systems
34
Vehicle Maintenance Techniques
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Vehicle Maintenance Techniques
- Apply practical skills, procedures and techniques in Vehicle Maintenance Techniques
- Evaluate performance, standards and best practices for Vehicle Maintenance Techniques
35
Welding
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Welding
- Apply practical skills, procedures and techniques in Welding
- Evaluate performance, standards and best practices for Welding
Regulatory & Verification Details
- Qualification Number (QN)
- 601/0545/8
- Regulated Status
- Available to learners
- Awarding Body
- Pearson
- Qualification Type
- Vocationally-Related Qualification
- Operational Start
- Sept 2013
- Operational End
- Jul 2028