Pearson
    Level 3
    QN: 603/7916/9
    Curriculum Active

    Pearson BTEC Level 3 Diploma in Advanced Manufacturing Engineering (Development Competence)

    Official qualification regulated by Ofqual, awarded by Pearson. Classified as a Occupational Qualification. Total guided learning hours: 57884 hours.

    Qualification Level
    Level 3
    Awarding Body
    Pearson
    Syllabus Units
    106 Units
    Guided Hours
    57884 hrs
    Instant access to interactive lessons, quizzes, and spaced revision.

    Course Syllabus & Study Modules

    Complete breakdown of verified curriculum topics and learning objectives.

    1

    Applying Value Management (Value Engineering and Value Analysis)

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    2

    Applying Workplace Organisation Techniques

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    3

    Assembling Blow Mould Tools

    Verified
    Key Learning Objectives:
    • Retrieving data. Wait a few seconds and try to cut or copy again
    4

    Assembling Dies

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    5

    Assembling Injection Mould Tools

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    6

    Assembling Mechanical Products

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    7

    Assembling Press Tools

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    8

    Assembling Vacuum Forming Tools

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    9

    Assisting in the Installation of Equipment to Produce an Engineered System

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    10

    Carrying Out CNC Machine Tool Programming

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    11

    Carrying Out Condition Monitoring of Mould, Press Tool or Die Equipment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    12

    Carrying Out Condition Monitoring of Plant and Equipment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    13

    Carrying Out Fault Diagnosis on Electrical Equipment and Circuits

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    14

    Carrying Out Fault Diagnosis on Electronic Equipment and Circuits

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    15

    Carrying Out Fault Diagnosis on Engineered Systems

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    16

    Carrying Out Fault Diagnosis on Engineering Plant and Equipment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    17

    Carrying Out Fault Diagnosis on Fluid Power Equipment and Circuits

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    18

    Carrying Out Fault Diagnosis on Mechanical Equipment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    19

    Carrying Out Fault Diagnosis on Mould, Press Tool or Die equipment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    20

    Carrying Out Health and Safety Risk Assessments on Engineering Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    21

    Carrying Out Heat Treatment of Springs

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    22

    Carrying Out Planned Maintenance on Mould, Press Tool or Die Equipment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    23

    Carrying Out Planned Maintenance on Power Presses

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    24

    Carrying Out Preventative Planned Maintenance on Engineered Systems

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    25

    Carrying Out Problem Solving Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    26

    Carrying Out Project Management of Engineering Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    27

    Carrying Out Quality Control of Spring Making Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    28

    Checking that Toolroom Assemblies Comply with Specification

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    29

    Complying with Statutory Regulations and Organisational Safety Requirements

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    30

    Determining Engineering Requirements for the Supply of Products or Services

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    31

    Developing and Maintaining Effective Customer Relationships

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    32

    Handing Over and Confirming Completion of Maintenance Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    33

    Handing Over and Confirming the Completion of Mould, Press Tool or Die Equipment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    34

    Handing Over and Confirming the Completion of Mould, Press Tool or Die Equipment Maintenance Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    35

    Handing Over and Exchanging Responsibility for Control of Engineering Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    36

    Implementing Engineering Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    37

    Implementing Quality Control Systems and Procedures in an Engineering Environment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    38

    Inspecting Fabricated Components and Structures

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    39

    Inspecting Mechanical Products

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    40

    Loading and Proving CNC Machine Tool Programs

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    41

    Machining Components using Broaching Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    42

    Machining Components using Centre Lathes

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    43

    Machining Components using CNC Gear Cutting Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    44

    Machining Components using CNC Grinding Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    45

    Machining Components using CNC Horizontal Boring Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    46

    Machining Components using CNC Machining Centres

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    47

    Machining Components using CNC Milling Machines

    Verified
    Key Learning Objectives:
    • Machine components using CNC milling machines
    • Know how to machine components using CNC milling machines
    48

    Machining Components using CNC Turning Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    49

    Machining Components using Gear Grinding Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    50

    Machining Components using Shaping, Planing or Slotting Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    51

    Machining Components using Vertical Boring Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    52

    Machining Toolroom Components using a Range of Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    53

    Maintaining Electrical Equipment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    54

    Maintaining Fluid Power Equipment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    55

    Maintaining Mechanical Equipment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    56

    Maintaining Mould, Press Tool or Die Equipment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    57

    Maintaining Process Control Systems

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    58

    Making Compression Springs using Hand Forming Methods

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    59

    Making Extension Springs using Hand Forming Methods

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    60

    Making Spring Wire Forms using Hand Forming Methods

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    61

    Making Torsion Springs using Hand Forming Methods

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    62

    Manufacturing One-Off Tooling for Spring Making Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    63

    Modifying or Rewiring Electrical Circuits

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    64

    Monitoring Engineering Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    65

    Obtaining and Controlling Materials for Engineering Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    66

    Obtaining Resources for Engineering Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    67

    Operating CNC Spring Making Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    68

    Planning Engineering Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    69

    Producing Contractual Arrangements to Supply or Procure Goods or Services for Engineering Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    70

    Producing Engineering Drawings/Models using 3D Computer Aided Techniques

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    71

    Producing Engineering Systems/Services Drawings using Computer Aided Techniques

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    72

    Producing Mould, Press Tool or Die Components by Manual Machining

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    73

    Producing Off-line Programs for Programmable Logic Controller Equipment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    74

    Producing Operating Programs for Industrial Robots

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    75

    Producing Replacement Components for Maintenance Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    76

    Producing Technical Information for Engineering Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    77

    Producing/Finishing Mould, Press Tool or Die Components using Hand Fitting Techniques

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    78

    Programming CNC Spring Making Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    79

    Providing Operational Support for Computer Control Programs

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    80

    Providing Technical Advice and Guidance on Engineering Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    81

    Providing Technical Sales and Marketing Support for Engineering Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    82

    Repairing Electronic Equipment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    83

    Repairing or Modifying Mould, Press Tool or Die Components

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    84

    Resolving Engineering or Manufacturing Support Problems

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    85

    Restoring Mechanical Components to Usable Condition by Repair

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    86

    Scheduling Engineering Activities

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    87

    Setting a Range of Machines to Produce Toolroom Components

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    88

    Setting Broaching Machines for Production

    Verified
    Key Learning Objectives:
    • Retrieving data. Wait a few seconds and try to cut or copy again.
    89

    Setting Centre Lathes

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    90

    Setting CNC Gear Cutting Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    91

    Setting CNC Grinding Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    92

    Setting CNC Horizontal Boring Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    93

    Setting CNC Machining Centres

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    94

    Setting CNC Milling Machines for Production

    Verified
    Key Learning Objectives:
    • Set CNC milling machines for production
    • Know how to set CNC milling machines for production
    95

    Setting CNC Spring Making Machines for Production

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    96

    Setting CNC Turning Machines

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    97

    Setting Gear Grinding Machines for Production

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    98

    Setting Shaping, Planning or Slotting Machine for Production

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    99

    Setting Vertical Boring Machines for Production

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    100

    Supporting Logistics Operations in an Engineering Manufacturing Environment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    101

    Testing Electrical Equipment and Circuits

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    102

    Testing Electronic Equipment and Circuits

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    103

    Using and Interpreting Engineering Data and Documentation

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    104

    Using and Maintaining Business Procedures and Protocols in an Engineering Environment

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    105

    Using Heat to Assist with the Bending and Forming of Spring Components

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs
    106

    Working Efficiently and Effectively in Advanced Manufacturing and Engineering

    Verified
    Key Learning Objectives:
    • Performance, Skills and Knowledge based so no LO/ACs

    Regulatory & Verification Details

    Qualification Number (QN)
    603/7916/9
    Regulated Status
    Available to learners
    Awarding Body
    Pearson
    Qualification Type
    Occupational Qualification
    Operational Start
    Oct 2021

    Cookies on MasteryMind

    Essential cookies keep you signed in.

    Analytics and advertising cookies stay off unless you accept.

    Read our Privacy Policy.