ProQual
Level 2
QN: 601/7106/6
Curriculum Active
ProQual Level 2 Diploma in Construction Operations (Construction)
Official qualification regulated by Ofqual, awarded by ProQual. Classified as a Occupational Qualification. Total guided learning hours: 1200 hours.
Qualification Level
Level 2
Awarding Body
ProQual
Syllabus Units
21 Units
Guided Hours
1200 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Arrange and secure loads
Verified
Key Learning Objectives:
- Know the requirements for arranging and securing a specified load
- Know how to prepare for arranging and securing a specified load
- Work with colleagues to arrange and secure a specified load
2
Conform to productive work practices
Verified
Key Learning Objectives:
- Know how to work productively in the workplace
- Understand low/zero carbon outcomes
- Understand equality and diversity in the workplace
- Know how to communicate with others
- Work productively in the workplace
3
Excavate holes and trenches
Verified
Key Learning Objectives:
- Know the requirements for excavation work
- Know how to prepare the work area for excavation work, Manually excavate holes and trenches
4
Form concrete structures
Verified
Key Learning Objectives:
- Know the requirements for forming concrete structures
- Know how to prepare for the formation of concrete structures, Mix, place and finish structural concrete
5
Guide moving loads or machinery
Verified
Key Learning Objectives:
- Know the procedures for guiding the movement of loads and machinery
- Understand the safe movement of loads or machinery, Move loads or machinery
6
Install road drainage
Verified
Key Learning Objectives:
- Know the requirements for installing road drainage
- Know how to prepare for installing road drainage
- Install drainage components to line and gradient required
7
Install street ironwork
Verified
Key Learning Objectives:
- Know how to prepare for the installation of ironworks fixtures in the road
- Know how to excavate for installation of iron
- work fixtures in the road, Excavate and install iron
- work fixtures in the road
8
Lay and finish concrete
Verified
Key Learning Objectives:
- Know the requirements for laying and finishing concrete
- Know how to prepare for laying and finishing concrete, Lay and finish concrete to specification
9
Lay domestic drainage
Verified
Key Learning Objectives:
- Know the requirements for installing domestic drainage
- Know how to prepare for installing domestic drainage
- Carry out work safely and to specification
10
Lay kerbs and channels
Verified
Key Learning Objectives:
- Know how to prepare for the construction of kerbs and channels
- Know how to set out the work area for the construction of kerbs and channels, Lay kerbs and channels to specification
11
Lay modular pavement
Verified
Key Learning Objectives:
- Know the requirements for modular paving
- Know how to prepare and set out for modular paving, Lay modular paving
12
Operate a powered tool and equipment
Verified
Key Learning Objectives:
- Know how to conduct pre and post-operational checks of powered tool, equipment and the work area
- Know the safety requirements for operating powered tool and equipment
- Operate and monitor powered tool and equipment
13
Prepare and operate machinery to compact materials
Verified
Key Learning Objectives:
- Know the requirements for compacting materials
- Know how to prepare and conduct pre-operational checks of machinery and the work area, Conduct pre-operational checks of machinery, Compact materials and restore the work area
14
Prepare and operate machinery to receive and transport loads
Verified
Key Learning Objectives:
- Know the requirements for receiving and transporting loads
- Know how to prepare and conduct pre-operational checks of machinery and the work area, Conduct pre-operational checks of machinery
- Operate machinery to receive, transport and discharge the specified load
15
Provide temporary excavation support
Verified
Key Learning Objectives:
- Know the requirements and type of temporary supports and equipment required for the work
- Know how to install temporary excavation supports safely
- Install temporary excavation supports
16
Reinstate ground conditions
Verified
Key Learning Objectives:
- Know the requirements for reinstating ground conditions
- Know how to prepare for the reinstatement of ground conditions, Reinstate ground conditions to specification
17
Search for underground services
Verified
Key Learning Objectives:
- Know how to interpret information from public utilities plans and drawings
- Know how to prepare, set up and restore the site, Search for, locate and avoid underground service apparatus
18
Set out secondary dimensional work controls
Verified
Key Learning Objectives:
- Know the secondary dimensional control requirements for the specified task
- Know how to conduct pre and post-operational checks of equipment
- Measure and set out secondary dimensional control requirements to specification
19
Sign, light and guard the work area
Verified
Key Learning Objectives:
- Know how to prepare and select equipment for signing, lighting and guarding the work area
- Know how to prepare, set up and restore the site
- Prepare for the provision
- use and removal of traffic control systems
20
Sling and signal the movement of loads
Verified
Key Learning Objectives:
- Know the procedures for slinging and signalling loads
- Know how to sling and signal loads safely and securely, Sling and signal loads safely and securely
21
Workplace health, safety and welfare
Verified
Key Learning Objectives:
- Understand health, safety and welfare requirements
- Understand the organisation’s approach to health, safety and welfare
- Understand risk control in the workplace, Confirm health and safety requirements in the workplace
- Work in accordance with health and safety requirements
Regulatory & Verification Details
- Qualification Number (QN)
- 601/7106/6
- Regulated Status
- Available to learners
- Awarding Body
- ProQual
- Qualification Type
- Occupational Qualification
- Operational Start
- Sept 2015