ProQual Awarding Body
Level 3
QN: 603/2003/5
Curriculum Active
ProQual Level 3 NVQ Diploma in Cladding Operations (Construction)
Official qualification regulated by Ofqual, awarded by ProQual Awarding Body. Classified as a Occupational Qualification. Total guided learning hours: 1027 hours.
Qualification Level
Level 3
Awarding Body
ProQual Awarding Body
Syllabus Units
17 Units
Guided Hours
1027 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Confirming the Occupational Method of Work in the Workplace
Verified
Key Learning Objectives:
- Assess available project data accurately to determine the occupational method of work., Obtain additional information from alternative sources in cases where the available project data is insufficient.
- Identify work methods that will make best use of resources and meet project, statutory and contractual requirements., Confirm and communicate the selected work method to relevant personnel.
2
Confirming Work Activities and Resources for an Occupational Work Area in the Workplace
Verified
Key Learning Objectives:
- Identify work activities
- assess required resources and plan the sequence of work., Obtain clarification and advice where the resources required are not available.
- Evaluate the work activities and the requirements of any significant external factors against the project requirements.
- Identify work activities which influence each other and make the best use of theresources available.
- Identify changed circumstances that require alterations to the work programme and justify them to decision makers.
3
Conforming to General Health, Safety and Welfare in the Workplace
Verified
Key Learning Objectives:
- Comply with all workplace health, safety and welfare legislation requirements.
- Recognise hazards associated with the workplace that have not been previously controlled and report them in accordance with organisational procedures.
- Comply with organisational policies and procedures to contribute to health, safety and welfare.
- Work responsibly to contribute to workplace health, safety and welfare whilst carrying out work in the relevant occupational area.
- Comply with and support all organisational security arrangements and approved procedures.
4
Developing and Maintaining Good Occupational Working Relationships in the Workplace
Verified
Key Learning Objectives:
- maintain and encourage working relationships to promote good will and trust., Inform relevant people about work activities in an appropriate level of detail, with the appropriate level of urgency., Offer advice and help to relevant people about work activities and encourage questions/requests for clarification and comments., Clarify proposals with relevant people and discuss alternative suggestions., Re
- solve differences of opinion in ways that minimise offence and maintain goodwill, trust and respect.
5
Installing rainscreen wall cladding systems in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing rainscreen wall cladding systems
- Know how to comply with relevant legislation and official guidance when installing rainscreen wall cladding systems
- Maintain safe and healthy working practices when installing rainscreen wall cladding systems
- Select the required quantity and quality of resources for the methods of work to install rainscreen wall cladding systems, Minimise the risk of damage to the work and surrounding area when installing rainscreen wall cladding systems
- Complete the work within the allocated time when installing rainscreen wall cladding systems
- Comply with the given contract information to install rainscreen wall cladding systems to the required specification
6
Installing sheeting and cladding rainwater goods on roofs and walls in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing sheeting and cladding rainwater goods on roofs and walls
- Know how to comply with relevant legislation and official guidance when installing sheeting and cladding rainwater goods on roofs and walls
- Maintain safe and healthy working practices when installing sheeting and cladding rainwater goods on roofs and walls
- Select the required quantity and quality of resources for the methods of work to install sheeting and cladding rainwater goods on roofs and walls, Minimise the risk of damage to the work and surrounding area when installing sheeting and cladding rainwater goods on roofs and walls
- Complete the work within the allocated time when installing sheeting and cladding rainwater goods on roofs and walls
- Comply with the given contract information to install sheeting and cladding rainwater goods on roofs and walls to the required specification
7
Installing sheeting and cladding systems on roofs and walls in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing sheeting and cladding systems on roofs and walls
- Know how to comply with relevant legislation and official guidance when installing sheeting and cladding systems on roofs and walls
- Maintain safe and healthy working practices when installing sheeting and cladding systems on roofs and walls
- Select the required quantity and quality of resources for the methods of work to install sheeting and cladding systems on roofs and walls, Minimise the risk of damage to the work and surrounding area when installing sheeting and cladding systems on roofs and walls
- Complete the work within the allocated time when installing sheeting and cladding systems on roofs and walls
- Comply with the given contract information to install sheeting and cladding systems on roofs and walls to the required specification
8
Installing sheeting and cladding systems to curved and complex roof and wall formations in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources
9
Installing Solar Collectors to Roofs in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing solar collectors to roofs.
- Know how to comply with relevant legislation and official guidance when installing solar collectors to roofs.
- Maintain safe working practices when installing solar collectors to roofs.
- Select the required quantity and quality of resources for the methods of work to install solar collectors to roofs. Minimise the risk of damage to the work and surrounding area when installing solar collectors to roofs.
- Complete the work within the allocated time when installing solar collectors to roofs.
- Comply with the given contract information to installing solar collectors to roofs to the required specification.
10
Preparing backing walls to receive rainscreen wall cladding systems in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when preparing backing walls to receive rainscreen wall cladding systems
- Know how to comply with relevant legislation and official guidance when preparing backing walls to receive rainscreen wall cladding systems
- Maintain safe and healthy working practices when preparing backing walls to receive rainscreen wall cladding systems
- Select the required quantity and quality of resources for the methods of work to prepare backing walls to receive rainscreen wall cladding systems, Minimise the risk of damage to the work and surrounding area when preparing backing walls to receive rainscreen wall cladding systems
- Complete the work within the allocated time when preparing backing walls to receive rainscreen wall cladding systems
- Comply with the given contract information to prepare backing walls to receive rainscreen wall cladding systems to the required specification
11
Preparing resources for the installation of sheeting and cladding materials on roofs and walls in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when preparing resources for the installation of sheeting and cladding materials on roofs and walls
- Know how to comply with relevant legislation and official guidance when preparing resources for the installation of sheeting and cladding materials on roofs and walls
- Maintain safe and healthy working practices when preparing resources for the installation of sheeting and cladding materials on roofs and walls
- Select the required quantity and quality of resources for the methods of work to prepare resources for the installation of sheeting and cladding materials on roofs and walls, Minimise the risk of damage to the work and surrounding area when preparing resources for the installation of sheeting and cladding materials on roofs and walls
- Complete the work within the allocated time when preparing resources for the installation of sheeting and cladding materials on roofs and walls
- Comply with the given contract information to prepare resources for the installation of sheeting and cladding materials on roofs and walls
12
Refurbishing sheeting and cladding on roofs, walls or rainscreen systems in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources
13
Repairing sheeting and cladding systems on roofs and walls (including rainscreen) in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources
14
Setting Out Secondary Dimensional Work Control in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to setting out dimensional control of the work.
- Know how to comply with relevant legislation and official guidance to set out dimensional control of the work.
- Maintain safe and healthy working practices when setting out dimensional control of the work.
- Select the required quantity and quality of resources to set out dimensional control of the work. Minimise the risk of damage to the work and surrounding area when setting out dimensional control of the work.
- Complete the work within the allocated time when setting out dimensional control of the work.
- Comply with the given contract information to set out dimensional control of the work to the required specification.
Regulatory & Verification Details
- Qualification Number (QN)
- 603/2003/5
- Regulated Status
- Available to learners
- Awarding Body
- ProQual Awarding Body
- Qualification Type
- Occupational Qualification
- Operational Start
- Jun 2017