ProQual
Level 3
QN: 601/6501/7
Curriculum Active
ProQual Level 3 NVQ Diploma in Trowel Occupations (Construction)
Official qualification regulated by Ofqual, awarded by ProQual. Classified as a Occupational Qualification. Total guided learning hours: 1160 hours.
Qualification Level
Level 3
Awarding Body
ProQual
Syllabus Units
17 Units
Guided Hours
1160 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Confirming the Occupational Method of Work in the Workplace
Verified
Key Learning Objectives:
- Assess available project data accurately to determine the occupational method of work., Obtain additional information from alternative sources in cases where the available project data is insufficient.
- Identify work methods that will make best use of resources and meet project, statutory and contractual requirements., Confirm and communicate the selected work method to relevant personnel.
2
Confirming Work Activities and Resources for an Occupational Work Area in the Workplace
Verified
Key Learning Objectives:
- Identify work activities
- assess required resources and plan the sequence of work., Obtain clarification and advice where the resources required are not available.
- Evaluate the work activities and the requirements of any significant external factors against the project requirements.
- Identify work activities which influence each other and make the best use of theresources available.
- Identify changed circumstances that require alterations to the work programme and justify them to decision makers.
3
Conforming to General Health, Safety and Welfare in the Workplace.
Verified
Key Learning Objectives:
- Comply with all workplace health, safety and welfare legislation requirements.
- Recognise hazards associated with the workplace that have not been previously controlled and report them in accordance with organisational procedures.
- Comply with organisational policies and procedures to contribute to health, safety and welfare.
- Work responsibly to contribute to workplace health, safety and welfare whilst carrying out work in the relevant occupational area.
- Comply with and support all organisational security arrangements and approved procedures.
4
Developing and Maintaining Good Occupational Working Relationships in the Workplace
Verified
Key Learning Objectives:
- maintain and encourage working relationships to promote good will and trust., Inform relevant people about work activities in an appropriate level of detail, with the appropriate level of urgency., Offer advice and help to relevant people about work activities and encourage questions/requests for clarification and comments., Clarify proposals with relevant people and discuss alternative suggestions., Re
- solve differences of opinion in ways that minimise offence and maintain goodwill, trust and respect.
5
Erecting Complex Masonry Structures in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when erecting complex masonry structures.
- Know how to comply with relevant legislation and official guidance when erecting complex masonry structures.
- Maintain safe and healthy working practices when erecting complex masonry structures.
- Select the required quantity and quality of resources for the methods of work to erect complex masonry structures., Minimise the risk of damage to the work and surrounding area when erecting complex masonry structures.
- Complete the work within the allocated time when erecting complex masonry structures.
- Comply with the given contract information to erect complex masonry structures to the required specification.
6
Erecting Masonry Cladding in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when erecting masonry cladding.
- Know how to comply with relevant legislation and official guidance when erecting masonry cladding.
- Maintain safe and healthy working practices when erecting masonry cladding.
- Select the required quantity and quality of resources for the methods of work to erect masonry cladding., Minimise the risk of damage to the work and surrounding area when erecting masonry cladding.
- Complete the work within the allocated time when erecting masonry cladding.
- Comply with the given contract information to erect masonry cladding to the required specification.
7
Erecting Masonry Structures in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when erecting masonry structures.
- Know how to comply with relevant legislation and official guidance when erecting masonry structures.
- Maintain safe and healthy working practices when erecting masonry structures.
- Select the required quantity and quality of resources for the methods of work to erect masonry structures., Minimise the risk of damage to the work and surrounding area when erecting masonry structures.
- Complete the work within the allocated time when erecting masonry structures.
- Comply with the given contract information to erect masonry structures to the required specification.
8
Erecting Thin Joint Masonry Structures in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when erecting thin joint masonry structures.
- Know how to comply with relevant legislation and official guidance when erecting thin joint masonry structures.
- Maintain safe and healthy working practices when erecting thin joint masonry structures.
- Select the required quantity and quality of resources for the methods of work to erect thin joint masonry structures., Minimise the risk of damage to the work and surrounding area when erecting thin joint masonry structures.
- Complete the work within the allocated time when erecting thin joint masonry structures.
- Comply with the given contract information to erect thin joint masonry structures to the required specification.
9
Installing and forming specialist masonry elements in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing and forming specialist masonry elements
- Know how to comply with relevant legislation and official guidance when installing and forming specialist masonry elements
- Maintain safe and healthy working practices when installing and forming specialist masonry elements
- Select the required quantity and quality of resources for the methods of work to install and form specialist masonry elements, Minimise the risk of damage to the work and surrounding area when installing and forming specialist masonry elements
- Complete the work within the allocated time when installing and forming specialist masonry elements
- Comply with the given contract information to install and form specialist masonry elements to the required specification
10
Installing Drainage in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing drainage.
- Know how to comply with relevant legislation and official guidance when installing drainage.
- Maintain safe and healthy working practices when installing drainage.
- Select the required quantity and quality of resources for the methods of work to install drainage., Minimise the risk of damage to the work and surrounding area when installing drainage.
- Complete the work within the allocated time when installing drainage.
- Comply with the given contract information to install drainage to the required specification.
11
Maintaining Slate and Tile Roofing in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when maintaining slate and tile roofing.
- Know how to comply with relevant legislation and official guidance when maintaining slate and tile roofing.
- Maintain safe and healthy working practices when maintaining slate and tile roofing.
- Select the required quantity and quality of resources for the methods of work to maintain slate and tile roofing., Minimise the risk of damage to the work and surrounding area when maintaining slate and tile roofing.
- Complete the work within the allocated time when maintaining slate and tile roofing.
- Comply with the given contract information to maintain slate and tile roofing to the required specification.
12
Placing and Finishing Non-specialist Concrete in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when placing and finishing non-specialist concrete.
- Know how to comply with relevant legislation and official guidance when placing and finishing non-specialist concrete.
- Maintain safe and healthy working practices when placing and finishing non-specialist concrete.
- Select the required quantity and quality of resources for the methods of work to place and finish non-specialist concrete., Minimise the risk of damage to the work and surrounding area when placing and finishing non-specialist concrete.
- Complete the work within the allocated time when placing and finishing non-specialist concrete.
- Comply with the given contract information to place and finish non-specialist concrete to the required specification.
13
Producing External Solid Render Finishes in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing external solid render finishes.
- Know how to comply with relevant legislation and official guidance when producing external solid render finishes.
- Maintain safe working practices when producing external solid render finishes.
- Select the required quantity and quality of resources for the methods of work to produce external solid render finishes., Minimise the risk of damage to the work and surrounding area when producing external solid render finishes.
- Complete the work within the allocated time when producing external solid render finishes.
- Comply with the given contract information to produce external solid render finishes to the required specification.
14
Producing Internal Solid Plastering Finishes in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing internal solid plastering finishes.
- Know how to comply with relevant legislation and official guidance when producing internal solid plastering finishes.
- Maintain safe working practices when producing internal solid plastering finishes.
- Select the required quantity and quality of resources for the methods of work to produce internal solid plastering finishes., Minimise the risk of damage to the work and surrounding area when producing internal solid plastering finishes.
- Complete the work within the allocated time when producing internal solid plastering finishes.
- Comply with the given contract information to produce internal solid plastering finishes to the required specification.
15
Repairing and Maintaining Masonry Structures in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when repairing and maintaining masonry structures.
- Know how to comply with relevant legislation and official guidance when repairing and maintaining masonry structures.
- Maintain safe and healthy working practices when repairing and maintaining masonry structures.
- Select the required quantity and quality of resources for the methods of work to repair and maintain masonry structures., Minimise the risk of damage to the work and surrounding area when repairing and maintaining masonry structures.
- Complete the work within the allocated time when repairing and maintaining masonry structures.
- Comply with the given contract information to repair and maintain masonry structures to the required specification.
16
Setting Out Complex Masonry Structures in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when setting out complex masonry structures.
- Know how to comply with relevant legislation and official guidance when setting out complex masonry structures.
- Maintain safe and healthy working practices when setting out complex masonry structures.
- Select the required quantity and quality of resources for the methods of work to set out complex masonry structures., Minimise the risk of damage to the work and surrounding area when setting out complex masonry structures.
- Complete the work within the allocated time when setting out complex masonry structures.
- Comply with the given contract information to set out complex masonry structures to the required specification.
17
Setting Out Masonry Structures in the Workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when setting out masonry structures.
- Know how to comply with relevant legislation and official guidance when setting out masonry structures.
- Maintain safe and healthy working practices when setting out masonry structures.
- Select the required quantity and quality of resources for the methods of work to set out masonry structures., Minimise the risk of damage to the work and surrounding area when setting out masonry structures.
- Complete the work within the allocated time when setting out masonry structures.
- Comply with the given contract information to set out masonry structures to the required specification.
Regulatory & Verification Details
- Qualification Number (QN)
- 601/6501/7
- Regulated Status
- Available to learners
- Awarding Body
- ProQual
- Qualification Type
- Occupational Qualification
- Operational Start
- Jul 2015