ProQual
Level 3
QN: 603/0670/1
Curriculum Active
ProQual Level 3 NVQ Diploma in Wood Occupations (Construction)
Official qualification regulated by Ofqual, awarded by ProQual. Classified as a Occupational Qualification. Total guided learning hours: 2383 hours.
Qualification Level
Level 3
Awarding Body
ProQual
Syllabus Units
37 Units
Guided Hours
2383 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Co-ordinating and confirming dimensional control requirements of the work in the workplace
Verified
Key Learning Objectives:
- Co-ordinate with and communicate accurate work information to work colleagues, Confirm and measure dimensional controls and maintain them to the specified work requirements, Check and adjust measuring and recording equipment to the specified accuracy
- Identify any deviations in dimensional controls and ensure they are corrected in accordance with work requirements
- Identify circumstances and conditions that require revision of work practices
2
Confirming the Occupational Method of Work in the Workplace
Verified
Key Learning Objectives:
- Assess available project data accurately to determine the occupational method of work., Obtain additional information from alternative sources in cases where the available project data is insufficient.
- Identify work methods that will make best use of resources and meet project, statutory and contractual requirements., Confirm and communicate the selected work method to relevant personnel.
3
Confirming Work Activities and Resources for an Occupational Work Area in the Workplace
Verified
Key Learning Objectives:
- Identify work activities
- assess required resources and plan the sequence of work., Obtain clarification and advice where the resources required are not available.
- Evaluate the work activities and the requirements of any significant external factors against the project requirements.
- Identify work activities which influence each other and make the best use of theresources available.
- Identify changed circumstances that require alterations to the work programme and justify them to decision makers.
4
Conforming to General Health, Safety and Welfare in the Workplace
Verified
Key Learning Objectives:
- Comply with all workplace health, safety and welfare legislation requirements.
- Recognise hazards associated with the workplace that have not been previously controlled and report them in accordance with organisational procedures.
- Comply with organisational policies and procedures to contribute to health, safety and welfare.
- Work responsibly to contribute to workplace health, safety and welfare whilst carrying out work in the relevant occupational area.
- Comply with and support all organisational security arrangements and approved procedures.
5
Conserving or restoring heavy timber framework in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when conserving or restoring heavy timber frame
- Know how to comply with relevant legislation and official guidance when conserving or restoring heavy timber frame
- Maintain safe working practices when conserving or restoring heavy timber frame
- Select the required quantity and quality of resources for the methods of work to conserve or restore heavy timber frame
- work, Minimise the risk of damage to the work and surrounding area when conserving or restoring heavy timber frame
- Complete the work within the allocated time when conserving or restoring heavy timber frame
- Comply with the given contract information to conserve or restore heavy timber frame
- work to the required specification
6
Designing and fabricating structural timber connections in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when designing and fabricating structural timber connections
- Know how to comply with relevant legislation and official guidance when designing and fabricating structural timber
- Maintain safe working practices when designing and fabricating structural timber connections
- Select the required quantity and quality of resources for the methods of work to design and fabricate structural timber connections, Minimise the risk of damage to the work and surrounding area when designing and fabricating structural timber connections
- Complete the work within the allocated time when designing and fabricating structural timber connections
- Comply with the given contract information to design and fabricate structural timber connections to the required specification
7
Developing and Maintaining Good Occupational Working Relationships in the Workplace
Verified
Key Learning Objectives:
- maintain and encourage working relationships to promote good will and trust., Inform relevant people about work activities in an appropriate level of detail, with the appropriate level of urgency., Offer advice and help to relevant people about work activities and encourage questions/requests for clarification and comments., Clarify proposals with relevant people and discuss alternative suggestions., Re
- solve differences of opinion in ways that minimise offence and maintain goodwill, trust and respect.
8
Erecting complex roof structure carcassing components in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when erecting complex roof structure carcassing components
- Know how to comply with relevant legislation and official guidance when erecting complex roof structure carcassing components
- Maintain safe working practices when erecting complex roof structure carcassing components
- Select the required quantity and quality of resources for the methods of work to erect complex roof structure carcassing components, Minimise the risk of damage to the work and surrounding area when erecting complex roof structure carcassing components
- Complete the work within the allocated time when erecting complex roof structure carcassing components
- Comply with the given contract information to erect complex roof structure carcassing components to the required specification
9
Erecting structural carcassing components in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when erecting structural carcassing components
- Know how to comply with relevant legislation and official guidance when erecting structural carcassing components
- Maintain safe working practices when erecting structural carcassing components
- Select the required quantity and quality of resources for the methods of work to erect structural carcassing components, Minimise the risk of damage to the work and surrounding area when erecting structural carcassing components
- Complete the work within the allocated time when erecting structural carcassing components
- Comply with the given contract information to erect structural carcassing components to the required specification
10
Erecting timber roof structures in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when erecting timber roof structures
- Know how to comply with relevant legislation and official guidance when erecting timber roof structures
- Maintain safe and healthy working practices when erecting timber roof structures
- Select the required quantity and quality of resources for the methods of work to erect timber roof structures, Minimise the risk of damage to the work and surrounding area when erecting timber roof structures
- Complete the work within the allocated time when erecting timber roof structures
- Comply with the given contract information to erect timber roof structures to the required specification
11
Erecting timber walls and floors in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when erecting timber walls and floors
- Know how to comply with relevant legislation and official guidance when erecting timber walls and floors
- Maintain safe and healthy working practices when erecting timber walls and floors
- Select the required quantity and quality of resources for the methods of work to erect timber walls and floors, Minimise the risk of damage to the work and surrounding area when erecting timber walls and floors
- Complete the work within the allocated time when erecting timber walls and floors
- Comply with the given contract information to erect timber walls and floors to the required specification
12
Fabricating post and beam components in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when fabricating post and beam components
- Know how to comply with relevant legislation and official guidance when fabricating post and beam components
- Maintain safe working practices when fabricating post and beam components
- Select the required quantity and quality of resources for the methods of work to fabricate post and beam components, Minimise the risk of damage to the work and surrounding area when fabricating post and beam components
- Complete the work within the allocated time when fabricating post and beam components
- Comply with the given contract information to fabricate post and beam components to the required specification
13
Installing bespoke first fixing components in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing bespoke first fixing components
- Know how to comply with relevant legislation and official guidance when installing bespoke first fixing components
- Maintain safe working practices when installing bespoke first fixing components
- Select the required quantity and quality of resources for the methods of work to install bespoke first fixing components, Minimise the risk of damage to the work and surrounding area when installing bespoke first fixing components
- Complete the work within the allocated time when installing bespoke first fixing components
- Comply with the given contract information to install bespoke first fixing components to the required specification
14
Installing bespoke second fixing components in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing bespoke second fixing components
- Know how to comply with relevant legislation and official guidance when installing bespoke second fixing components
- Maintain safe working practices when installing bespoke second fixing components
- Select the required quantity and quality of resources for the methods of work to install bespoke second fixing components, Minimise the risk of damage to the work and surrounding area when installing bespoke second fixing components
- Complete the work within the allocated time when installing bespoke second fixing components
- Comply with the given contract information and the required specification to install bespoke second fixing components
15
Installing shopfitting frames and finishings in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing shopfitting frames and finishings
- Know how to comply with relevant legislation and official guidance when installing shopfitting frames and finishings
- Maintain safe working practices when installing shopfitting frames and finishings
- Select the required quantity and quality of resources for the methods of work to install shopfitting frames and finishings, Minimise the risk of damage to the work and surrounding area when installing shopfitting frames and finishings
- Complete the work within the allocated time when installing shopfitting frames and finishings
- Comply with the given contract information to install shopfitting frames and finishings to the required specification
16
Installing shopfronts and finishings in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing shopfronts and finishings
- Know how to comply with relevant legislation and official guidance when installing shopfronts and finishings
- Maintain safe working practices when installing shopfronts and finishings
- Select the required quantity and quality of resources for the methods of work to install shopfronts and finishings, Minimise the risk of damage to the work and surrounding area when installing shopfronts and finishings
- Complete the work within the allocated time when installing shopfronts and finishings
- Comply with the given contract information to install shopfronts and finishings to the required specification
17
InstInstalling shopfitting fitments in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when installing shopfitting fitments
- Know how to comply with relevant legislation and official guidance when installing shopfitting fitments
- Maintain safe working practices when installing shopfitting fitments
- Select the required quantity and quality of resources for the methods of work to install shopfitting fitments, Minimise the risk of damage to the work and surrounding area when installing shopfitting fitments
- Complete the work within the allocated time when installing shopfitting fitments
- Comply with the given contract information to install shopfitting fitments to the required specification
18
Manufacturing bespoke architectural joinery products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when manufacturing bespoke architectural joinery products
- Know how to comply with relevant legislation and official guidance when manufacturing bespoke architectural joinery products
- Maintain safe and healthy working practices when manufacturing bespoke architectural joinery products
- Select the required quantity and quality of resources for the methods of work to manufacture bespoke architectural joinery products, Minimise the risk of damage to the work and surrounding area when manufacturing bespoke architectural joinery products
- Complete the work within the allocated time when manufacturing bespoke architectural joinery products
- Comply with the given contract information to manufacture bespoke architectural joinery products to the required specification
19
Manufacturing bespoke shopfitting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when manufacturing bespoke shopfitting products
- Know how to comply with relevant legislation and official guidance when manufacturing bespoke shopfitting products
- Maintain safe working practices when manufacturing bespoke shopfitting products
- Select the required quantity and quality of resources for the methods of work to manufacture bespoke shopfitting products, Minimise the risk of damage to the work and surrounding area when manufacturing bespoke shopfitting products
- Complete the work within the allocated time when manufacturing bespoke shopfitting products
20
Manufacturing bespoke wheelwrighting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when manufacturing bespoke wheelwrighting products
- Know how to comply with relevant legislation and official guidance when manufacturing bespoke wheelwrighting products
- Maintain safe working practices when manufacturing bespoke wheelwrighting products
- Select the required quantity and quality of resources for the methods of work to manufacture bespoke wheelwrighting products, Minimise the risk of damage to the work and surrounding area when manufacturing bespoke wheelwrighting products
- Complete the work within the allocated time when manufacturing bespoke wheelwrighting products
- Comply with the given contract information to manufacture bespoke wheelwrighting products to the required specification
21
Manufacturing routine architectural joinery products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when manufacturing routine architectural joinery products
- Know how to comply with relevant legislation and official guidance when manufacturing routine architectural joinery products
- Maintain safe and healthy working practices when manufacturing routine architectural joinery products
- Select the required quantity and quality of resources for the methods of work to manufacture routine architectural joinery products, Minimise the risk of damage to the work and surrounding area when manufacturing routine architectural joinery products
- Complete the work within the allocated time when manufacturing routine architectural joinery products
- Comply with the given contract information to manufacture routine architectural joinery products to the required specification
22
Manufacturing routine shopfitting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when manufacturing routine shopfitting products
- Know how to comply with relevant legislation and official guidance when manufacturing routine shopfitting products
- Maintain safe working practices when manufacturing routine shopfitting products
- Select the required quantity and quality of resources for the methods of work to manufacture routine shopfitting products, Minimise the risk of damage to the work and surrounding area when manufacturing routine shopfitting products
- Complete the work within the allocated time when manufacturing routine shopfitting products
- Comply with the given contract information to manufacture routine shopfitting products to the required specification
23
Manufacturing routine wheelwrighting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when manufacturing routine wheelwrighting products
- Know how to comply with relevant legislation and official guidance when manufacturing routine wheelwrighting products
- Maintain safe working practices when manufacturing routine wheelwrighting products
- Select the required quantity and quality of resources for the methods of work to manufacture routine wheelwrighting products, Minimise the risk of damage to the work and surrounding area when manufacturing routine wheelwrighting products
- Complete the work within the allocated time when manufacturing routine wheelwrighting products
24
Marking out from setting out details for routine architectural joinery products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when marking out from setting out details for routine architectural joinery products
- Know how to comply with relevant legislation and official guidance when marking out from setting out details for routine architectural joinery products
- Maintain safe and healthy working practices when marking out from setting out details for routine architectural joinery products
- Select the required quantity and quality of resources for the methods of work to mark out from setting out details for routine architectural joinery products, Minimise the risk of damage to the work and surrounding area when marking out from setting out details for routine architectural joinery products
- Complete the work within the allocated time when marking out from setting out details for routine architectural joinery products
- Comply with the given contract information to mark out from setting out details for routine architectural joinery products to the required specification
25
Marking out from setting out details for routine shopfitting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when marking out from setting out details for routine shopfitting products
- Know how to comply with relevant legislation and official guidance when marking out from setting out details for routine shopfitting products
- Maintain safe working practices when marking out from setting out details for routine shopfitting products
- Select the required quantity and quality of resources for the methods of work to mark out from setting out details for routine shopfitting products, Minimise the risk of damage to the work and surrounding area when marking out from setting out details for routine shopfitting products
- Complete the work within the allocated time when marking out from setting out details for routine shopfitting products
- Comply with the given contract information to mark out from setting out details for routine shopfitting products to the required specification
26
Marking out from setting out details for routine wheelwrighting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when marking out from setting out details for routine wheelwrighting products
- Know how to comply with relevant legislation and official guidance when marking out from setting out details for routine wheelwrighting products
- Maintain safe working practices when marking out from setting out details for routine wheelwrighting products
- Select the required quantity and quality of resources for the methods of work to mark out from setting out details for routine wheelwrighting products, Minimise the risk of damage to the work and surrounding area when marking out from setting out details for routine wheelwrighting products
- Complete the work within the allocated time when marking out from setting out details for routine wheelwrighting products
- Comply with the given contract information to mark out from setting out details for routine wheelwrighting products to the required specification
27
Producing CAD setting out details in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing CAD setting out details
- Know how to comply with relevant legislation and official guidance when producing CAD setting out details
- Maintain safe working practices when producing CAD setting out details
- Select the required quantity and quality of resources for the methods of work to produce CAD setting out details
- Complete the work within the allocated time when producing CAD setting out details
- Comply with the given contract information to produce CAD setting out details to the required specification
28
Producing setting out details for bespoke architectural joinery products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing setting out details for bespoke architectural joinery products
- Know how to comply with relevant legislation and official guidance when producing setting out details for bespoke architectural joinery products
- Maintain safe and healthy working practices when producing setting out details for bespoke architectural joinery products
- Select the required quantity and quality of resources for the methods of work to produce setting out details for bespoke architectural joinery products, Minimise the risk of damage to the work and surrounding area when producing setting out details for bespoke architectural joinery products
- Complete the work within the allocated time when producing setting out details for bespoke architectural joinery products
- Comply with the given contract information to produce setting out details for bespoke architectural joinery products to the required specification
29
Producing setting out details for bespoke shopfitting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing setting out details for bespoke shopfitting products
- Know how to comply with relevant legislation and official guidance when producing setting out details for bespoke shopfitting products
- Maintain safe working practices when producing setting out details for bespoke shopfitting products
- Select the required quantity and quality of resources for the methods of work to produce setting out details for bespoke shopfitting products, Minimise the risk of damage to the work and surrounding area when producing setting out details for bespoke shopfitting products
- Complete the work within the allocated time when producing setting out details for bespoke shopfitting products
- Comply with the given contract information to produce setting out details for bespoke shopfitting products to the required specification
30
Producing setting out details for bespoke wheelwrighting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing setting out details for bespoke wheelwrighting products
- Know how to comply with relevant legislation and official guidance when producing setting out details for bespoke wheelwrighting products
- Maintain safe working practices when producing setting out details for bespoke wheelwrighting products
- Select the required quantity and quality of resources for the methods of work to produce setting out details for bespoke wheelwrighting products, Minimise the risk of damage to the work and surrounding area when producing setting out details for bespoke wheelwrighting products
- Complete the work within the allocated time when producing setting out details for bespoke wheelwrighting products
- Comply with the given contract information to produce setting out details for bespoke wheelwrighting products to the required specification
31
Producing setting out details for routine architectural joinery products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing setting out details for routine architectural joinery products
- Know how to comply with relevant legislation and official guidance when producing setting out details for routine architectural joinery products
- Maintain safe and healthy working practices when producing setting out details for routine architectural joinery products
- Select the required quantity and quality of resources for the methods of work to produce setting out details for routine architectural joinery products, Minimise the risk of damage to the work and surrounding area when producing setting out details for routine architectural joinery products
- Complete the work within the allocated time when producing setting out details for routine architectural joinery products
- Comply with the given contract information to produce setting out details for routine architectural joinery products to the required specification
32
Producing setting out details for routine shopfitting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing setting out details for routine shopfitting products
- Know how to comply with relevant legislation and official guidance when producing setting out details for routine shopfitting products
- Maintain safe working practices when producing setting out details for routine shopfitting products
- Select the required quantity and quality of resources for the methods of work to produce setting out details for routine shopfitting products, Minimise the risk of damage to the work and surrounding area when producing setting out details for routine shopfitting products
- Complete the work within the allocated time when producing setting out details for routine shopfitting products
- Comply with the given contract information to produce setting out details for routine shopfitting products to the required specification
33
Producing setting out details for routine wheelwrighting products in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing setting out details for routine wheelwrighting products
- Know how to comply with relevant legislation and official guidance when producing setting out details for routine wheelwrighting products
- Maintain safe working practices when producing setting out details for routine wheelwrighting products
- Select the required quantity and quality of resources for the methods of work to produce setting out details for routine wheelwrighting products, Minimise the risk of damage to the work and surrounding area when producing setting out details for routine wheelwrighting products
- Complete the work within the allocated time when producing setting out details for routine wheelwrighting products
- Comply with the given contract information to produce setting out details for routine wheelwrighting products to the required specification
34
Producing wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when producing wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery
- Know how to comply with relevant legislation and official guidance when producing wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery
- Maintain safe working practices when producing wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery
- Select the required quantity and quality of resources for the methods of work to produce wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery, Minimise the risk of damage to the work and surrounding area when producing wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery
- Complete the work within the allocated time when producing wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery
- Comply with the given contract information to produce wood and wood-based products using computer numerically controlled/numerically controlled (CNC/NC) machinery to the required specification
35
Setting up and using fixed machinery in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when setting up and using fixed machinery
- Know how to comply with relevant legislation and official guidance when setting up and using fixed machinery
- Maintain safe working practices when setting up and using fixed machinery
- Carry out pre-start preparation inspections on power tools and equipment in accordance with approved procedures when setting up and using fixed machinery
- Understand the required quantity and quality of resources for the methods of work to set up and use fixed machinery, Minimise the risk of damage to the work and surrounding area when setting up and using fixed machinery
- Complete the work within the allocated time when setting up and using fixed machinery
- Carry out operations using power tools and equipment in accordance with safe working practices to achieve the work outcome when setting up and using fixed machinery
36
Setting up and using transportable cutting and shaping machines in the workplace
Verified
Key Learning Objectives:
- Interpret the given information relating to the work and resources when setting up and using transportable cutting and shaping machines
- Know how to comply with relevant legislation and official guidance when setting up and using transportable cutting and shaping machines
- Maintain safe working practices when setting up and using transportable cutting and shaping machines
- Select the required quantity and quality of resources for the methods of work to set up and use transportable cutting and shaping machines, Minimise the risk of damage to the work and surrounding area when setting up and using transportable cutting and shaping machines
- Complete the work within the allocated time when setting up and using transportable cutting and shaping machines
- Comply with the given contract information to set up and use transportable cutting and shaping machines to the required specification
37
Slinging and hand signalling the movement of suspended loads in the workplace
Verified
Key Learning Objectives:
- Understand key principles, terminology and concepts of Slinging and hand signalling the movement of suspended loads in the workplace
- Apply practical skills, procedures and techniques in Slinging and hand signalling the movement of suspended loads in the workplace
- Evaluate performance, standards and best practices for Slinging and hand signalling the movement of suspended loads in the workplace
Regulatory & Verification Details
- Qualification Number (QN)
- 603/0670/1
- Regulated Status
- Available to learners
- Awarding Body
- ProQual
- Qualification Type
- Occupational Qualification
- Operational Start
- Oct 2016