SEG Awards
Level 1
QN: 603/5749/6
Curriculum Active
SEG Awards Level 1 Certificate in Fabrication and Welding Techniques and Skills
Official qualification regulated by Ofqual, awarded by SEG Awards. Classified as a Vocationally-Related Qualification. Total guided learning hours: 170 hours.
Qualification Level
Level 1
Awarding Body
SEG Awards
Syllabus Units
4 Units
Guided Hours
170 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Engineering Drawing
Verified
Key Learning Objectives:
- Using various drawing instruments and/or computer-aided design (CAD) systems, learners will know how to produce engineering drawings that will meet current industry standards.
2
Fabrication Processes (Sheet Metal and Plate)
Verified
Key Learning Objectives:
- Learners will know the methods of marking out, cutting and forming and the joining of materials, which are part of an end practical assessment. Working to tolerances as shown on engineering drawings is an integral part of this unit. Learners will know the safety requirements when carrying out fabrication practice.
3
Health and Safety in a Fabrication and Welding Environment
Verified
Key Learning Objectives:
- Identify the basic responsibilities of employer and employee with regard to Health and Safety at Work Act 19741.2 Identify the statutory requirements and legislation of the Health and Safety at Work in a fabrication and welding work environment2.1.
- Identify and describe where potential health and safety hazards may occur within a fabrication and welding work environment 2.2 Identify potential hazards and the necessary precautions in a fabrication and welding environment for each of the following
- when moving and handling materials
- when using hand and power tools
- when using thermal processes3.1 Describe the five steps of a risk assessment4.1 State reasons why protective clothing and equipment should be worn4.2 Identify common safety guards, screens and fences within a workshop situation4.4 Describe how waste materials should be dealt with to comply with current laws and regulations5.1 Describe their organisational accident and emergency procedures in relation to
- injury to self or others
- malfunctions of equipment
- problems with hazardous substances6.1 Identify safety signs within the following groups
- safe condition
4
Welding Processes (Manual Metal-Arc and Metal-Arc Gas Shielded))
Verified
Key Learning Objectives:
- Learners will know about the safe working practice and the correct procedures required when carrying out manual metal-arc (MMA) and metal-arc gas shielded (MAGS) welding activities. It will also be required for the learner to produce a welded joint to an acceptable standard.
Regulatory & Verification Details
- Qualification Number (QN)
- 603/5749/6
- Regulated Status
- Available to learners
- Awarding Body
- SEG Awards
- Qualification Type
- Vocationally-Related Qualification
- Operational Start
- Sept 2020