SEG Awards
Level 2
QN: 600/2966/3
Curriculum Active
SEG Awards Level 2 Certificate In Motor Vehicle Studies
Official qualification regulated by Ofqual, awarded by SEG Awards. Classified as a Vocationally-Related Qualification. Total guided learning hours: 2209 hours.
Qualification Level
Level 2
Awarding Body
SEG Awards
Syllabus Units
62 Units
Guided Hours
2209 hrs
Instant access to interactive lessons, quizzes, and spaced revision.
Course Syllabus & Study Modules
Complete breakdown of verified curriculum topics and learning objectives.
1
Introduction to Vehicle Refinishing
Verified
Key Learning Objectives:
- Know about surface preparation
- Understand the procedure for body
- work preparation prior to refinishing
- Know how to mix and apply primers
- Know how to apply a top coat
- Know how to identify and correct basic paint defects
- Know how to enhance paint finishes
2
Knowledge of Health, Safety and Good Housekeeping in the Automotive Environment
Verified
Key Learning Objectives:
- understand the correct personal and vehicle protective equipment to be used within the automotive environment
- understand effective housekeeping practices in the automotive environment
- understand key health and safety requirements relevant to the automotive environment
- understand about hazards and potential risks relevant to the automotive environment
- understand personal responsibilities
3
Knowledge of Inspecting Light Vehicles Using Prescribed Methods
Verified
Key Learning Objectives:
- Understand how to carry out inspections on light vehicle using prescribed methods
4
Knowledge of Inspection and Replacement of Light Vehicle Suspension Dampers and Springs
Verified
Key Learning Objectives:
- Understand the tools and equipment used when inspecting and replacing light vehicle suspension dampers and springs
- Understand the different types of suspension dampers and springs
- Understand how to inspect, test and replace suspension dampers and springs
5
Knowledge of Inspection, Repair and Replacement of High Performance Light Vehicle Tyres
Verified
Key Learning Objectives:
- Understand high performance light vehicle wheel and tyre construction, legislation and special workplace procedures
- Understand the tools and equipment used when working with high performance light vehicle tyres
- Understand the materials used in the repair of high performance light vehicle tyres
- Understand how to inspect, remove, repair and replace high performance light vehicle tyres
6
Knowledge of Inspection, Repair and Replacement of Motorcycle Tyres
Verified
Key Learning Objectives:
- Understand motorcycle tyre construction, legislation and special workplace procedures
- Understand the tools and equipment used when working with motorcycle tyres
- Understand the materials used in the repair of motorcycle tyres
- Understand how to inspect, remove, repair and replace motorcycle tyres
7
Knowledge of Inspection, Testing and Replacement of Vehicle Batteries and Related Components
Verified
Key Learning Objectives:
- Understand the tools and equipment used when inspecting, testing and replacing vehicle batteries
- Understand the different types of vehicle battery and charging system
- Understand how to inspect, test and replace light vehicle batteries
8
Knowledge of Light Vehicle Engine Mechanical, Lubrication and Cooling System Units and Components
Verified
Key Learning Objectives:
- Understand how the main light vehicle engine mechanical systems operate
- Understand how light vehicle engine Lubrication systems operate
- Understand how light vehicle engine cooling, heating and ventilation systems operate
- Understand how to check, replace and test light vehicle engine mechanical, lubrication and cooling systems system units and components
9
Knowledge of Light Vehicle Fuel, Ignition, Air and Exhaust System Units and Components
Verified
Key Learning Objectives:
- Understand how light vehicle engine fuel systems operate
- Understand how light vehicle engine ignition systems operate
- Understand how light vehicle engine air supply and exhaust systems operate
- Understand how to check, replace and test light vehicle engine fuel system units and components
10
Knowledge of Light Vehicle Transmission and Driveline Units and Components
Verified
Key Learning Objectives:
- Understand how light vehicle clutch systems operate
- Understand how light vehicle manual gearbox systems operate
- Understand how light vehicle driveline systems operate
- Understand how to check, replace and test transmission and driveline units and components
11
Knowledge of Locating and Correcting Simple Electrical Faults in the Automotive Workplace
Verified
Key Learning Objectives:
- Understand the use of electrical testing equipment and measurements taken
- Understand how to carry out electrical testing techniques
12
Knowledge of Materials, Fabrication, Tools and Measuring Devices used in the Automotive Environment
Verified
Key Learning Objectives:
- understand how to select
- use and care for hand tools and measuring devices in the automotive environment
- understand how to prepare and use common workshop equipment
- understand how to select materials when fabricating, modifying and repairing vehicles and fitting components
- understand how to apply automotive engineering, fabrication and fitting principles when modifying and repairing vehicles and components
13
Knowledge of Minor Motor Vehicle Exterior Body Panel Repairs
Verified
Key Learning Objectives:
- Understand the principles of selection and use of appropriate tools and equipment in minor repairs on motor vehicle exterior body panels
- Understand material types and properties used in minor repairs on motor vehicle exterior body panels
- Understand how to carry out minor repairs to motor vehicle exterior body panels
14
Knowledge of Motor Vehicle Body Metal Active Gas _MAG_ Welding Techniques
Verified
Key Learning Objectives:
- Understand how to work safely when carrying out motor vehicle body MAG welding operations
- Understand how to select, check
- use and maintain appropriate tools and equipment used in motor vehicle body MAG welding operations
- Understand how to carry out motor vehicle body MAG welding operations
15
Knowledge of Motor Vehicle Body Resistance Spot Welding Operations
Verified
Key Learning Objectives:
- Understand how to work safely when carrying out motor vehicle body resistance spot welding operations
- Understand how to select, check
- use and maintain appropriate tools and equipment used in motor vehicle body resistance spot welding operations
- Understand how to carry out motor vehicle body resistance spot welding operations
16
Knowledge of Motorcycle Fuel, Ignition, Air and Exhaust System Units and Components
Verified
Key Learning Objectives:
- Understand how motorcycle engine fuel systems operate
- Understand how motorcycle engine ignition systems operate
- Understand how motorcycle engine air supply and exhaust systems operate
- Understand how to check, replace and test fuel, ignition, air and exhaust systems, units and components
17
Knowledge of Motorcycle Internal Engine Systems
Verified
Key Learning Objectives:
- Understand how the main motorcycle engine mechanical systems operate
- Understand how motorcycle engine Lubrication systems operate
- Understand how motorcycle engine cooling systems operate
- Understand how motorcycle clutch and transmission systems operate
- Understand how to check, replace and test power train systems, units and components
18
Knowledge of Motorcycle Preparation and Inspection
Verified
Key Learning Objectives:
- Understand how to carry out preparation activities and inspections of motorcycles
19
Knowledge of Removing and Fitting Basic Light Vehicle Mechanical, Electrical and Trim _MET_ Components and Non Permanently Fixed Vehicle Body Panels
Verified
Key Learning Objectives:
- Understand how to carry out removal and fitting of basic light vehicle mechanical electrical and trim (MET) components
- Understand how to carry out removal and fitting of basic light vehicle non permanently fixed vehicle body panels
20
Knowledge of Removing and Fitting Electrical Components
Verified
Key Learning Objectives:
- Understand how to carry out the removal and fitting of electrical components
- Understand how electrical systems operate
21
Knowledge of Removing and Fitting Motor Mechanical, Electrical and Trim _MET_ Components to Vehicles
Verified
Key Learning Objectives:
- Understand how to carry out removal and fitting of motor vehicle mechanical electrical and trim (MET) components
22
Knowledge of Removing and Fitting Non Permanently Fixed Motor Vehicle Body Panels
Verified
Key Learning Objectives:
- Understand how to carry out removal and fitting of non-permanently fixed motor vehicle body panels
23
Knowledge of Removing and Replacing Exterior Motor Vehicle Body Panels Including Permanently Fixed Components
Verified
Key Learning Objectives:
- Understand material types and properties used in removing and replacing exterior vehicle panels
- Understand how to carry out removal and replacing of fixed and non-permanently fixed exterior vehicle body panels including fixed panels
24
Knowledge of Removing and Replacing Light Vehicle Chassis Units and Components
Verified
Key Learning Objectives:
- Understand how light vehicle steering and suspension systems operate
- Understand how light vehicle braking systems operate
- Understand how light vehicle wheel and tyres systems operate
- Understand how to check, replace and test light vehicle chassis units and components
25
Knowledge of Removing and Replacing Light Vehicle Electrical Units and Components
Verified
Key Learning Objectives:
- Understand light vehicle electrical and electronic principles
- Understand how light vehicle batteries, starting and charging systems operate
- Understand how light vehicle auxiliary electrical systems operate
- Understand how to check, replace and test light vehicle electrical systems and components
26
Knowledge of Removing and Replacing Motorcycle Chassis Units and Components
Verified
Key Learning Objectives:
- Understand how motorcycle steering and suspension systems operate
- Understand how motorcycle braking systems operate
- Understand how motorcycle wheel and tyres systems operate
- Understand how to check, replace and test chassis units, parts, and components
27
Knowledge of Removing and Replacing Motorcycle Electrical Units and Components
Verified
Key Learning Objectives:
- Understand motorcycle electrical and electronic principles
- Understand how motorcycle batteries, starting and charging systems operate
- Understand how motorcycle auxiliary electrical systems operate
- Understand how to check, replace and test electrical and electronic systems, units and components
28
Knowledge of Repairing Minor Paint Defects
Verified
Key Learning Objectives:
- Understand how to identify the body surface requiring the rectification of minor paint defects
- Understand how to repair minor paint defects
29
Knowledge of Routine Light Vehicle Maintenance
Verified
Key Learning Objectives:
- Understand how to carry out routine light vehicle maintenance
- Understand the importance of carrying out light vehicle maintenance
30
Knowledge of Routine Motorcycle Maintenance
Verified
Key Learning Objectives:
- Understand how to carry out routine motorcycle maintenance
- Understand the procedures required to carry out routine motorcycle maintenance
31
Knowledge of Tools and Equipment Used In Vehicle Refinishings
Verified
Key Learning Objectives:
- Understand how to select
- use and care for hand and power tools used in vehicle refinishing
- Understand how to prepare
- use and care for vehicle refinishing equipment.
32
Knowledge of Vehicle Colour Matching
Verified
Key Learning Objectives:
- Understand about colour theory
- Understand about vehicle paint coatings, ingredients and their application
- Understand about mixing and matching vehicle paint colours
33
Knowledge of Working with Plastic Materials and Components
Verified
Key Learning Objectives:
- Understand how to identify plastic body surfaces requiring the application of foundation materials in vehicle refinishing
- Understand how to prepare plastic body surfaces prior to application of foundation materials
- Understand how to mix and apply foundation materials onto plastics in vehicle refinishing
34
Skills in Carrying Out Minor Repairs to Motor Vehicle Exterior Body Panels
Verified
Key Learning Objectives:
- Be able to work safely when carrying out minor repairs to motor vehicle exterior body panels
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out minor repairs to motor vehicle exterior body panels
- Be able to record information and make suitable recommendations
35
Skills in Health, Safety and Good Housekeeping in the Automotive Environment
Verified
Key Learning Objectives:
- be able to use correct personal and vehicle protection within the automotive environment
- be able to carry out effective housekeeping practices in the automotive environment
- be able to recognise and deal with dangers in order to work safely within the automotive workplace
- be able to conduct themselves responsibly
36
Skills in Inspecting Light Vehicles using Prescribed Methods
Verified
Key Learning Objectives:
- Be able to work safely when carrying out light vehicle inspections using prescribed methods
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out light vehicle inspections using prescribed methods
- Be able to record information and make suitable recommendations
37
Skills in Inspection and Replacement of Light Vehicle Suspension Dampers and Springs
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to inspect and test light vehicle suspension dampers and springs
- Be able to remove and replace light vehicle suspension dampers and springs
- Be able to record information and make suitable recommendations
38
Skills in Inspection, Repair and Replacement of Motorcycle Tyres
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- be able to inspect motorcycle tyres
- Be able to repair and replace motorcycle tyres and tubes
- Be able to balance wheels and tyres as part of final checks on motorcycles
- Be able to record information and make suitable recommendations
39
Skills in Inspection, Testing and Replacement of Vehicle Batteries and Related Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out testing and replacement activities
- Be able to inspect and test batteries and components
- Be able to remove and replace batteries and components
- Be able to record information and make suitable recommendations
40
Skills in Locating and Correcting Simple Electrical Faults in the Automotive Workplace
Verified
Key Learning Objectives:
- Be able to work safely when carrying out electrical testing techniques and rectification activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out electrical testing techniques and rectification activities
- Be able to record information and make suitable recommendations
41
Skills in Materials, Fabrication, Tools and Measuring Devices used in the Automotive Environment
Verified
Key Learning Objectives:
- be able to select
- maintain and use and hand tools and measuring devices in the automotive environment
- be able to prepare and use common workshop equipment
- be able to select materials when fabricating, modifying and repairing vehicles and fitting components
- be able to apply automotive engineering, fabrication and fitting principles when modifying and repairing vehicles and components
42
Skills in Motor Vehicle Body Metal Active Gas _MAG_ Welding Techniques
Verified
Key Learning Objectives:
- Be able to work safely when carrying out motor vehicle body MAG welding operations
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out motor vehicle body MAG welding operations
- Be able to record information and make suitable recommendations
43
Skills in Motor Vehicle Body Resistance Spot Welding Operations
Verified
Key Learning Objectives:
- Be able to work safely when carrying out motor vehicle body resistance spot welding operations
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out motor vehicle body resistance spot welding operations
- Be able to record information and make suitable recommendations
44
Skills in Motorcycle Internal Engine Systems
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and replacement of motorcycle electrical units and components.
- Be able to record information and make suitable recommendations
45
Skills in Motorcycle Preparation and Inspection
Verified
Key Learning Objectives:
- Be able to work safely when carrying out motorcycle preparation activities and inspections
- Be able to use relevant information to carry out preparation activities and inspections of motorcycles
- Be able to use appropriate tools and equipment to carry out preparation activities and inspections of motorcycles
- Be able to carry out the preparation activities and inspections of motorcycles
- Be able to record information and make suitable recommendations
46
Skills in Removing and Fitting Electrical Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out the removal and fitting of electrical vehicle components
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out the removal and fitting of electrical vehicle components
- Be able to record information and make suitable recommendations
47
Skills in Removing and Fitting Motor Mechanical, Electrical and Trim _MET_ Components to Vehicles
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and fitting of MET components to vehicles
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and fitting of MET components
- Be able to record information and make suitable recommendations
48
Skills in Removing and Fitting Non Permanently Fixed Motor Vehicle Body Panels
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and fitting of non-permanently fixed vehicle panels
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and fitting of non-permanently fixed vehicle panels
- Be able to record information and make suitable recommendations
49
Skills in Removing and Fitting of Basic Light Vehicle Mechanical, Electrical and Trim _MET_ Components and Non Permanently Fixed Vehicle Body Panels
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and fitting of basic MET components and non-permanently fixed light vehicle body panels
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and fitting of basic MET components and non-permanently fixed light vehicle body panels
- Be able to record information and make suitable recommendations
50
Skills in Removing and Replacing Exterior Motor Vehicle Body Panels Including Permanently Fixed Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement of exterior vehicle panels including permanently fixed panels
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and fitting of exterior vehicle panels including permanently fixed panels
- Be able to record information and make suitable recommendations
51
Skills in Removing and Replacing Light Vehicle Chassis Units and Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and replacement of light vehicle chassis units and components.
- Be able to record information and make suitable recommendations
52
Skills in Removing and Replacing Light Vehicle Driveline Units and Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and replacement of light vehicle transmission and driveline units and components.
- Be able to record information and make suitable recommendations
53
Skills in Removing and Replacing Light Vehicle Electrical Units and Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and replacement of light vehicle electrical units and components.
- Be able to record information and make suitable recommendations
54
Skills in Removing and Replacing Light Vehicle Engine Units and Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and replacement of light vehicle engine mechanical, lubrication and cooling units and components.
- Be able to record information and make suitable recommendations
55
Skills in Removing and Replacing Motorcycle Chassis Units and Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and
- Be able to record information and make suitable recommendations
56
Skills in Removing and Replacing Motorcycle Electrical Units and Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out removal and replacement activities
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out removal and replacement of motorcycle electrical units and components.
- Be able to record information and make suitable recommendations
57
Skills in Repairing Minor Paint Defects
Verified
Key Learning Objectives:
- Be able to work safely when carrying out the rectification of minor paint defects
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out the rectification of minor paint defects
- Be able to record information and make suitable recommendations
58
Skills in Routine Light Vehicle Maintenance
Verified
Key Learning Objectives:
- Be able to work safely when carrying out light vehicle routine maintenance
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out light vehicle routine maintenance
- Be able to record information and make suitable recommendations
59
Skills in Routine Motorcycle Maintenance
Verified
Key Learning Objectives:
- Be able to work safely when carrying out motorcycle routine maintenance
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out motorcycle routine maintenance
- Be able to record information and make suitable recommendations
60
Skills in Tools and Equipment Used In Vehicle Refinishing
Verified
Key Learning Objectives:
- Be able to select
- use and care for hand and power tools used in vehicle refinishing
- Be able to prepare and use vehicle refinishing equipment
61
Skills in Vehicle Colour Matching
Verified
Key Learning Objectives:
- Be able to work safely when carrying out vehicle mixing and matching
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out vehicle mixing and matching activities
- Be able to record information and make suitable recommendations
62
Skills in Working with Plastic Materials and Components
Verified
Key Learning Objectives:
- Be able to work safely when carrying out preparation and application of foundation materials to plastics used in vehicle refinishing
- Be able to use relevant information to carry out the task
- Be able to use appropriate tools and equipment
- Be able to carry out preparation and application of foundation materials to plastics used in vehicle refinishing
- Be able to record information and make suitable recommendations
Regulatory & Verification Details
- Qualification Number (QN)
- 600/2966/3
- Regulated Status
- Available to learners
- Awarding Body
- SEG Awards
- Qualification Type
- Vocationally-Related Qualification
- Operational Start
- Sept 2011