Skip to topic
    ← Back to course topics

    Service and Repair Tyres and Tracks on Land-based Equipment — IMI Vocational Agriculture

    Service and Repair Tyres and Tracks on Land-based Equipment explained

    This subtopic covers the service and repair of tyres, wheel assemblies, and tracks on land-based equipment, including their types, construction, and operating principles.

    Read the full explanation

    Learners will develop practical skills in inspecting, maintaining, and repairing these components to ensure safe and efficient operation in agricultural and land-based settings.

    Learning outcomes

    1. Identify different types of tyres, wheel assemblies, and tracks used on land-based equipment
    2. Describe the construction and operating principles of tyres, wheel assemblies, and tracks
    3. Explain the importance of correct tyre pressure, load ratings, and tread patterns for safe operation
    Show all 8 objectives
    1. Perform routine service and maintenance operations on tyres, wheel assemblies, and tracks
    2. Diagnose common faults in tyres, wheel assemblies, and tracks
    3. Apply safe working practices when servicing and repairing tyres and tracks
    4. Select appropriate tools and equipment for tyre and track service and repair tasks
    5. Document service and repair activities in accordance with workplace procedures

    Service and Repair Tyres and Tracks on Land-based Equipment assessment help

    Topic Overview

    The IMI Level 2 Diploma in Land-Based Technology (VRQ) provides foundational knowledge and practical skills for maintaining and repairing agricultural and horticultural machinery. This qualification covers essential topics such as engine systems, electrical systems, hydraulics, and chassis components, preparing students for entry-level roles in the land-based engineering sector. Understanding these systems is critical for ensuring the safety, efficiency, and reliability of equipment used in farming and countryside management.

    This diploma is vocationally-related, meaning it combines theoretical understanding with hands-on application. Students learn to diagnose faults, perform routine maintenance, and carry out repairs on tractors, harvesters, and other land-based machinery. The course also emphasises health and safety regulations, workshop practices, and environmental considerations, reflecting the real-world demands of the industry. Mastery of these topics not only supports career progression but also contributes to sustainable agricultural practices by extending equipment lifespan and reducing downtime.

    Within the broader context of agriculture, land-based technology is indispensable. Modern farming relies heavily on mechanisation for planting, harvesting, and livestock management. A solid grasp of machinery maintenance and repair ensures that students can support agricultural productivity while adhering to legal and environmental standards. This qualification serves as a stepping stone to advanced studies or apprenticeships in agricultural engineering, making it a vital component of the UK's land-based education framework.

    Key Concepts
    • →Engine systems: Understand the four-stroke cycle, fuel systems (diesel and petrol), cooling, lubrication, and air intake systems. Know how to perform compression tests and identify common engine faults.
    • →Electrical systems: Master battery maintenance, starter motors, alternators, and wiring diagrams. Be able to troubleshoot lighting, indicator, and control circuits using a multimeter.
    • →Hydraulics: Grasp the principles of fluid power, including pumps, valves, cylinders, and hoses. Learn to check fluid levels, identify leaks, and safely test system pressure.
    • →Chassis and transmission: Study braking systems (disc, drum, and hydraulic), steering geometry, and driveline components (clutch, gearbox, differential). Understand wheel and tyre specifications for different terrains.
    • →Health and safety: Apply risk assessments, use personal protective equipment (PPE), and follow safe lifting and workshop procedures. Know COSHH regulations for handling fuels, oils, and solvents.
    Assessment Criteria
    • Award credit for correctly identifying tyre types (e.g., radial, bias-ply) and their applications
    • Award credit for demonstrating correct use of tyre pressure gauges and inflation equipment
    • Award credit for performing a systematic inspection of tyres, wheels, and tracks, including tread depth and damage
    • Award credit for applying manufacturer specifications when adjusting tyre pressures or track tension
    • Award credit for using appropriate personal protective equipment (PPE) and following safety procedures
    • Award credit for accurately recording service and repair work on job cards or digital systems
    Assessment Guidance
    • 💡Memorise key tyre markings and their meanings (e.g., ply rating, speed symbol)
    • 💡Practice interpreting manufacturer service schedules for tyres and tracks
    • 💡Understand the consequences of incorrect tyre pressure on machine stability and fuel consumption
    • 💡Be prepared to explain the difference between tyre and track applications in various land-based equipment
    • 💡Review safety data sheets and workshop procedures for tyre repair compounds and sealants
    • 💡When answering questions on fault diagnosis, always follow a logical sequence: identify the symptom, gather information, isolate the system, test components, and confirm the repair. Marks are awarded for methodical thinking, not just the final answer.
    • 💡In practical assessments, pay close attention to torque settings and tightening sequences. Many students lose marks by overtightening or undertightening bolts, especially on cylinder heads and wheel nuts. Use a torque wrench and refer to the service manual.
    • 💡For written exams, use correct technical terminology (e.g., 'alternator' not 'dynamo', 'hydraulic cylinder' not 'ram'). Define acronyms like COSHH and LOLER the first time you use them. This demonstrates depth of knowledge and attention to detail.
    Common Mistakes
    • Confusing tyre load ratings with speed ratings
    • Overinflating or underinflating tyres due to not checking manufacturer specifications
    • Failing to inspect the inside of tyres for damage during service
    • Using incorrect tools that damage wheel rims or tyre beads
    • Neglecting to check track tension and alignment on tracked machines
    • Misconception: Diesel engines don't need spark plugs, so they have no ignition system. Correction: While diesel engines use compression ignition, they still have glow plugs for cold starts and rely on precise fuel injection timing. Ignition system faults can still occur in the injection pump or injectors.
    • Misconception: Hydraulic fluid never needs changing. Correction: Hydraulic fluid degrades over time due to heat, contamination, and moisture absorption. Regular changes (as per manufacturer schedule) prevent pump wear and valve sticking.
    • Misconception: A battery that reads 12V is fully charged. Correction: A fully charged lead-acid battery should read about 12.6V or higher. A reading of exactly 12V indicates a partial discharge (around 50% state of charge). Always check specific gravity or use a load tester.
    Frequently Asked Questions
    What is the difference between a VRQ and an NVQ in land-based technology?
    A VRQ (Vocationally-Related Qualification) is a knowledge-based qualification typically studied in a classroom or workshop setting, focusing on theory and practical skills under supervision. An NVQ (National Vocational Qualification) is competence-based and assessed in the workplace, requiring you to demonstrate real job performance. The IMI Level 2 Diploma in Land-Based Technology (VRQ) provides the foundational knowledge needed before progressing to an NVQ or apprenticeship.
    How do I test a tractor's hydraulic system for leaks?
    First, ensure the system is depressurised and the engine is off. Visually inspect all hoses, fittings, and cylinders for signs of oil residue. Use a clean cloth to wipe suspected areas and look for fresh oil. For a more accurate test, run the engine and operate the hydraulics while checking for drips. Always wear PPE and never use your hands to search for leaks under pressure—use a piece of cardboard or wood instead.
    Why does my tractor battery keep going flat even after charging?
    Common causes include a faulty alternator not charging the battery, a parasitic drain from a light or control module left on, or an old battery that can no longer hold a charge. Start by testing the alternator output (should be around 14V at idle). Then check for parasitic draw by disconnecting the negative terminal and using a multimeter in series (draw should be less than 50mA). If both are fine, have the battery load-tested at a garage.
    What safety checks should I do before using a PTO (Power Take-Off)?
    Always ensure the PTO shield is in place and undamaged. Check that the driveline is correctly attached and that the shear bolt or clutch is set to the correct torque. Never wear loose clothing or jewellery, and keep bystanders at a safe distance. Before engaging, make sure the implement is clear of obstructions and that all guards are fitted. Finally, disengage the PTO before getting off the tractor.
    How often should I change the engine oil in a modern agricultural tractor?
    Refer to the manufacturer's service schedule, which is typically every 250-500 hours of operation or annually, whichever comes first. For tractors used in dusty conditions or heavy loads, more frequent changes may be necessary. Always use the correct oil viscosity (e.g., 15W-40) and API classification specified in the owner's manual. Regular oil changes extend engine life and maintain fuel efficiency.
    What is the correct procedure for bleeding a diesel fuel system?
    After changing the fuel filter or running out of fuel, air can enter the system. Start by filling the fuel tank and ensuring the filter is properly fitted. Locate the bleed screw on the fuel filter housing or injection pump. Loosen the screw and operate the hand primer pump until fuel flows without bubbles. Tighten the screw, then crank the engine (with the stop control disengaged) until it starts. Some modern engines have self-bleeding systems—check the manual.
    Unit assessment details

    Loading assessment details…