Skip to topic
    ← Back to course topics

    Chemical Reactions — Open Awards Vocational Applied Science

    Chemical reactions involve the breaking and forming of chemical bonds to rearrange atoms into new products, accompanied by observable energy transfers. In Applied Science qualifications, mastering reaction types, collision theory, reaction rates, and quantitative yields is essential for industrial and laboratory success.

    Learning outcomes

    1. Be able to identify common gases.
    2. Know about chemical reactions.
    3. Be able to balance simple chemical equations.

    Which command word is this?

    State the key features, trends, or observations without needing to explain why they occur (e.g., describe the colour change observed in a titration).

    Chemical Reactions assessment help

    Topic Overview

    Chemical reactions form the core foundation of applied chemistry, describing the fundamental processes where atoms reorganize through bond cleavage and synthesis. This topic explores qualitative observations such as colour changes, gas evolution, and precipitate formation alongside quantitative tracking of reaction rates.

    Understanding these processes allows applied scientists to optimise chemical manufacturing, regulate environmental emissions, and safely handle biological assays. Bridging basic atomic structure and industrial synthesis, this topic underpins vocational units in pharmaceutical preparation, materials science, and analytical chemistry.

    Key Concepts
    • →Conservation of mass ensures that the total mass of reactants equals the total mass of products in a closed system.
    • →Collision theory dictates that reacting particles must collide with sufficient activation energy and appropriate orientation to react.
    • →Exothermic reactions transfer thermal energy to the surroundings (causing a temperature rise), whereas endothermic reactions absorb thermal energy (causing a temperature drop).
    • →Reaction rates are governed by four primary variables: temperature, concentration/pressure, surface area, and the presence of a specific catalyst.
    Assessment Guidance
    • 💡Always state 'frequency of successful collisions' instead of just 'more collisions' when explaining rate changes in extended response questions.
    • 💡Check your chemical equations for state symbols (s, l, g, aq) when required, as vocational mark schemes often reserve standalone marks for accurate state notation.
    • 💡When interpreting rate graphs, remember that the gradient of the curve represents the instantaneous rate of reaction; a plateau indicates the reaction has finished.
    Common Mistakes
    • Believing that mass is lost during reactions that produce gases. In an open vessel, gas escapes into the atmosphere, but the total mass remains conserved if collected in a closed system.
    • Assuming that increasing temperature simply gives particles more time to react. In reality, higher temperature increases kinetic energy, making collisions both more frequent and significantly more energetic.
    • Confusing the role of a catalyst by stating it is a reactant. Catalysts participate in transition states but remain chemically unchanged at the end of the reaction.
    Revision Plan
    1. 1Day 1-3: Review fundamental reaction types (neutralisation, combustion, precipitation, redox) and practice balancing complex chemical equations.
    2. 2Day 4-6: Master collision theory and energetic profiles; sketch and label exothermic and endothermic reaction coordinate diagrams.
    3. 3Day 7-9: Interpret experimental rate data from gas collection and mass-loss practicals, calculating mean and initial rates from graph tangents.
    4. 4Day 10-14: Complete exam-style scenario questions focusing on industrial rate optimisation and safety controls.
    Exam Question Types
    • 📋Data analysis questions requiring you to plot rate graphs from experimental gas syringe or mass balance data and calculate gradients.
    • 📋Structured 4-to-6 mark descriptive questions requiring collision theory explanations for industrial process modifications (e.g., modifying temperature or pressure).
    • 📋Equation balancing and stoichiometry questions requiring stoichiometric mole calculations alongside state symbols.
    Command Word Expectations (OPEN AWARDS)
    Describe

    State the key features, trends, or observations without needing to explain why they occur (e.g., describe the colour change observed in a titration).

    Explain

    Provide scientific reasons or mechanisms using collision theory and energy principles to clarify why a phenomenon occurs.

    Calculate

    Perform mathematical operations showing clear intermediate workings, correct substitution, and appropriate significant figures with units.

    How Students Lose Marks (Examiner Pitfalls)
    Pitfall: Confusing signs of a chemical reaction with simple physical state changes, particularly dissolving versus reacting.
    ❌ Weak Answer (Loses Marks):When salt mixes with water, it bubbles and vanishes so a new chemical is formed.
    Example improved answer:A chemical reaction requires the breaking and making of chemical bonds to form chemically distinct substances. Dissolving table salt is a reversible physical change because no new covalent or ionic bonds form; water molecules merely hydrate the separated sodium and chloride ions.
    Examiner Tip: Always specify chemical bond rearrangement and test reversibility when determining whether an observed change is chemical or physical.
    Pitfall: Stating that catalysts increase the frequency of particle collisions rather than lowering activation energy.
    ❌ Weak Answer (Loses Marks):A catalyst speeds up the reaction because it makes the reactant molecules collide more often.
    Example improved answer:A catalyst provides an alternative reaction pathway with a lower activation energy. This increases the proportion of collisions that possess sufficient energy to result in a successful reaction, without changing collision frequency.
    Examiner Tip: Use the exact phrase 'alternative reaction pathway with lower activation energy' to secure maximum marks on catalyst questions.
    Step-by-Step Worked Solutions

    Question: A student reacts 2.40 g of magnesium ribbon with excess dilute hydrochloric acid: Mg(s) + 2HCl(aq) -> MgCl2(aq) + H2(g). Calculate the maximum volume of hydrogen gas produced at room temperature and pressure (molar volume of gas at RTP = 24.0 dm3/mol; Ar of Mg = 24.3).

    1. 1.Step 1: Calculate the amount of magnesium in moles using moles = mass / Ar. Moles of Mg = 2.40 g / 24.3 g/mol = 0.0988 mol.
    2. 2.Step 2: Determine the molar ratio from the balanced equation. The ratio of Mg to H2 is 1:1, so moles of H2 produced = 0.0988 mol.
    3. 3.Step 3: Calculate the volume of gas using volume = moles * molar volume. Volume of H2 = 0.0988 mol * 24.0 dm3/mol = 2.37 dm3.
    Final Answer: 2.37 dm3 (or 2370 cm3) of hydrogen gas produced at RTP.

    Question: In an experiment investigating rate of reaction, 50.0 cm3 of 1.0 mol/dm3 hydrochloric acid is reacted with excess marble chips (calcium carbonate). The loss in mass of the flask is recorded over time. Explain why the rate of reaction is highest at the start (t = 0 s) and eventually falls to zero.

    1. 1.Step 1: Identify the relationship between reactant concentration and collision frequency. At t = 0 s, the concentration of acid particles is at its maximum, meaning the frequency of successful collisions between H+ ions and the marble surface is highest.
    2. 2.Step 2: Track changes during the reaction. As the reaction proceeds, acid particles are consumed to form products, decreasing the concentration of reactants and lowering the frequency of successful collisions per second.
    3. 3.Step 3: Explain the endpoint. The rate reaches zero because the limiting reactant (hydrochloric acid) is entirely used up, meaning no further collisions can occur.
    Final Answer: Rate is fastest initially due to maximum reactant concentration and collision frequency, then decelerates as reactants are depleted, stopping entirely when the limiting reagent is fully consumed.
    Active Recall Memory Test
    What is activation energy?
    Key Fact: The minimum amount of kinetic energy colliding particles must possess for a chemical reaction to occur.
    What thermochemical sign (+ or -) is assigned to the enthalpy change (delta H) of an exothermic reaction?
    Key Fact: Negative (-), because chemical potential energy is released to the surroundings as heat.
    How does an increase in temperature affect the rate of a chemical reaction?
    Key Fact: It increases the kinetic energy of particles, leading to more frequent collisions and a significantly higher proportion of collisions exceeding activation energy.
    Define a precipitation reaction.
    Key Fact: A reaction in which two soluble salts in aqueous solution combine to form an insoluble solid product called a precipitate.
    Frequently Asked Questions
    What is the difference between a physical change and a chemical reaction?
    A physical change alters the physical properties or state of a substance without altering its underlying chemical composition, such as ice melting to liquid water. In contrast, a chemical reaction involves breaking existing chemical bonds and forming new ones to produce entirely new chemical substances with distinct properties. Physical changes are usually easily reversible by physical means, whereas chemical reactions generally require further chemical reactions to reverse.
    Why does doubling the temperature not just double the rate of reaction?
    Increasing temperature does not just increase collision frequency; it disproportionately increases the fraction of particles that possess energy equal to or greater than the activation energy. According to the Maxwell-Boltzmann distribution, even a modest 10-degree Celsius rise can roughly double the reaction rate for many benchtop reactions because a vastly larger proportion of particles cross the energetic barrier.
    How do you prove that mass is conserved when a gas is produced?
    To demonstrate the conservation of mass during a gas-evolving reaction, the experiment must be conducted inside a sealed, closed system such as a conical flask fitted with a gas syringe or airtight stopper. By weighing the apparatus before and after the reaction occurs, the balance will show that the total mass remains unchanged because the gas molecules cannot escape into the surrounding environment.
    What is a limiting reactant and how does it determine product yield?
    The limiting reactant is the chemical species that is completely consumed first in a reaction, thereby preventing any further product from forming. Because reactants combine in fixed molar ratios according to the balanced chemical equation, the quantity of the limiting reactant dictates the theoretical maximum yield of the final products. Any other reactants present in quantities greater than needed are considered to be in excess.
    Can a catalyst be used up if a reaction runs for a very long time?
    No, a catalyst is defined as a chemical substance that increases the rate of reaction without undergoing any permanent chemical change itself. While industrial catalysts can become fouled, poisoned, or physically degraded by impurities over prolonged operational cycles, they are not chemically consumed by the reaction they accelerate.
    Unit assessment details

    Loading assessment details…