Skip to topic
    ← Back to course topics

    Greek Art (H408/24) - Techniques — OCR A-Level Classical Civilisation

    Greek Art (H408/24) - Techniques explained

    Greek Art (H408/24) - Techniques covers 4 specification points, including block method of carving statues and lost-wax method of casting bronze statues.

    Read the full explanation

    Open a point below for its explanation and revision guidance.

    block method of carving statues

    The block method carves a statue from a single block of stone, usually marble, by removing material in stages. The sculptor first roughs out the overall mass, then refines the form with tools such as the point, claw chisel and rasp. Because statues were carved in the round, the sculptor had to keep proportions consistent from every viewpoint, often using measurements taken from a model or plan. Struts may be left to support heavy projections such as outstretched arms until late in the process. Students should recognise this as subtractive carving, where stone is removed, and separate it from bronze casting, which builds form in a mould.

    lost-wax method of casting bronze statues

    The lost-wax method (cire perdue) is a casting process. A sculptor models the statue in wax over a core, covers it with clay investment, and heats the mould so the wax melts out. Molten bronze is poured into the cavity the wax left. Once cooled, the mould is broken away to reveal the statue. Greek workshops used this for bronze statues, often casting hollow sections, then joining and finishing them with chasing and eye inlay. The Riace warriors (5th century BCE) show the precision of hollow casting in thin walls. Students should explain the stages in order and link them to a finished figure.

    black figure technique in vase-painting, the use of added colour and incision

    This statement covers the technical methods of black-figure vase-painting, as practised especially in Athens. Painters drew figures in iron-rich clay slip on a pale clay body; the slip fired black, leaving the unpainted clay as a reddish ground. Added colour means white and purple-red slips or pigments applied before firing and fixed in the kiln, often for women's flesh and garment details. Incision means lines scratched through the black slip with a sharp tool, exposing the clay beneath for anatomy, drapery and inner detail. In an mcq, keep these three ideas separate and check which one each option describes.

    red-figure technique in vase-painting, the use of different sized brushes and diluted slip to create effects

    This statement asks you to understand how red-figure painters used technique to create effects. In red-figure, the figures are left in the reserved colour of the clay while the background is covered with black slip. Painters then add internal detail using slip and brushes. Diluted slip thins the glaze, so it appears brownish or reddish rather than solid black. Different brush sizes matter too: a broad brush covers larger areas, while a fine brush draws hair, eyelashes and drapery folds. To practise, compare a red-figure scene with a black-figure one and note where thin lines or diluted slip create texture and depth. Explain each method's visible effect, not just its name.

    Your focus

    1. Identify the block method as subtractive carving from a single block of stone.
    2. Sequence the main stages of the block method, from roughing out to refinement.
    3. Distinguish the block method from bronze casting in a multiple-choice context.
    Show all 12 objectives
    1. Sequence the stages of the lost-wax process in the correct order.
    2. Explain why the mould is destroyed in lost-wax casting.
    3. Identify features of the method in a named surviving bronze.
    4. Identify the slip used to create black-figure figures and explain how it appears after firing.
    5. Describe when and how white and purple-red added colour was applied.
    6. Explain how incision differs from painted detail and what it reveals about the clay beneath.
    7. Describe how red-figure painters reserved the figures and painted the background.
    8. Explain how diluted slip changes the colour of the decoration.
    9. Explain how a fine brush and a broad brush contribute to a vase's visual effect.

    Greek Art (H408/24) - Techniques exam tips

    Marking Points
    • Identifies the block method as carving from a single block of stone by removing material.
    • Recognises that the sculptor roughs out the overall mass before refining detail.
    • Links the method to carving in the round, with proportions checked from every viewpoint.
    • Names struts as supports that may hold heavy projections, such as outstretched arms, during carving.
    • Distinguishes subtractive carving from casting, which uses a mould.
    • Selects the option that describes removal of stone rather than addition of material.
    • Describes the modelling of a wax original over a core before any bronze is poured.
    • Explains that the clay investment is heated so the wax melts and drains out, leaving a cavity.
    • Explains that molten bronze fills the cavity left by the wax, reproducing the shape of the model.
    • Identifies that the mould is broken away to release the finished bronze, so each casting is effectively a single object.
    • Links hollow casting in separate sections to lighter weight and to the joining of parts.
    • Identifies black-figure as figures painted in slip that fires black against the clay ground.
    • Recognises that added colour uses white and purple-red applied before firing.
    • Distinguishes incision as lines scratched through the slip to reveal the clay beneath.
    • Selects the option that pairs the slip, added colour and incision with their correct functions.
    • Rejects options that place added colour after firing or describe incision as paint applied over the black.
    • Explains that the figures are left in the reserved colour of the clay while the background is covered with black slip.
    • Identifies diluted slip as thinning the glaze so that detail appears brownish or reddish rather than solid black.
    • Explains that a broad brush covers large background areas while a fine brush draws hair, eyelashes and drapery folds.
    • Links each technical choice to a visible effect such as texture, depth or line weight in a named vase.
    Examiner Tips
    • 💡Read every option against the idea of subtraction, and eliminate any option that describes building up material.
    • 💡Eliminate casting-based options first, then compare the remaining options for rough-out stages and supports.
    • 💡When two options both mention stone, check which one reflects the stages of roughing out and refining the form.
    • 💡Sequence the stages in order: wax model, investment, melting out, pouring, breaking the mould.
    • 💡Use precise terms such as core, investment and cavity rather than the general word mould alone.
    • 💡Support the explanation with one surviving example, such as the Riace warriors, to show how the method appears in evidence.
    • 💡Learn each technique as a process by stating what is applied, when it is applied and what it looks like on the finished vase.
    • 💡Match each option to one technique and eliminate any option that places a technique at the wrong stage of production.
    • 💡Remember that incision reveals the clay, whereas added colour sits on the clay body before firing.
    • 💡Name both the technique and its visible result in each sentence you write.
    • 💡Use a specific vase you have studied, identifying one area of thin line and one area of diluted slip.
    • 💡Compare a broad stroke with a fine line on a sample image so you can describe the difference precisely.
    Common Mistakes
    • Treats the block method as a bronze casting process; correct this by noting that it removes stone from a block.
    • Assumes the sculptor begins with finished detail; correct this by remembering that rough outlining comes first.
    • Chooses a distractor describing the addition of clay or wax; correct this by checking the question for removal of material.
    • Overlooks the role of a model or measurements; correct this by recognising that proportions were transferred from a plan.
    • Confuses lost-wax casting with reusable open-mould casting; correct by recognising that the investment mould is destroyed to free the bronze.
    • Treats the wax as the final material of the statue; correct by stating that the wax is melted out and replaced by bronze.
    • Describes the bronze as poured directly onto the wax model; correct by explaining that the wax is removed first, leaving a cavity within the investment.
    • Places added white and purple-red after firing; correct this by placing them before firing, when they are fixed in the kiln with the slip.
    • Treats incision as paint applied over the black; correct this by recognising that incision scratches through the slip to show the clay.
    • Assigns the red-figure method of painting the background black to black-figure; correct this by noting that black-figure paints the figures and leaves the ground as clay.
    • Confuses red-figure with black-figure by describing the figures as painted black; correct this by stating that red-figure reserves the figures and paints the background.
    • Treats brush size as decoration only; correct this by linking the width of the brush to the coverage and precision of the line.
    • Lists brushes and slip without explaining what effect they produce; correct this by naming the effect each one creates on the vase.