← Construction & Building Services

Highfield Qualifications Vocational Construction & Building Services

Explore your units, one topic at a time.

Ofqual Regulated: 610/6680/1

Course version · 610/6680/1Version from Sept 2020Change version

Choose your course version: the course code is on your timetable or a past paper. Not sure? We’ll start you on the most likely version when you sign up.

Version from Sept 2020610/6680/1 · Highfield Level 2 NVQ Certificate in Construction using Off-site Manufactured Assemblies - Cold Formed Steel Frame (Assembly) (RQF)
Version from Sept 2020610/6963/2 · Highfield Level 2 NVQ Certificate in Interior Systems (Construction) – Ceiling Fixing (RQF)
Version from Sept 2020603/3191/4 · Highfield Level 1 Certificate in an Introduction to Construction (RQF)

Official Regulatory Specification

Regulated by the Office of Qualifications and Examinations Regulation (Ofqual) in England

View on Ofqual Register

Qualification Number (QN): 610/6680/1
Awarding Organisation: Highfield Qualifications
Regulatory Type: Other General Qualification
National Level & Units: Vocational • 6 units

Sector Subject Area: Building and construction

This qualification is officially accredited under the national framework. Credits and certified outcomes are recognised by employers, further education colleges, and training providers throughout the UK.

Qualification Units

6 units

How this qualification is graded

Assessment follows the awarding organisation’s published requirements. Check the exact unit methods and grading rules with your provider.

Conforming to general health, safety and welfare in the workplace

This element ensures learners understand and apply essential health, safety, and welfare practices specific to off-site construction of cold formed steel frames, including compliance with legislation like the Health and Safety at Work Act, proactive hazard identification, and adherence to site security protocols. It underpins safe working in assembling steel frames away from the final building location, emphasizing the importance of a positive safety culture.

Highfield Level 2 NVQ Certificate in Construction using Off-site Manufactured Assemblies - Cold Formed Steel Frame (Assembly) (RQF)

1 learning outcomes6 guidance points

Conforming to productive working practices in the workplace

This element focuses on the essential productive working practices required in a cold formed steel frame (CFSF) assembly environment. It covers effective communication, planning work sequences according to organisational procedures, maintaining accurate records, and fostering good working relationships to ensure efficiency, safety, and quality in off-site manufacturing and on-site assembly contexts.

Highfield Level 2 NVQ Certificate in Construction using Off-site Manufactured Assemblies - Cold Formed Steel Frame (Assembly) (RQF)

4 learning outcomes8 guidance points

Installing sheeting and cladding systems on roofs and walls in the workplace

This subtopic focuses on the practical competencies required to install sheeting and cladding systems onto cold-formed steel frame structures, covering both roof and wall applications. Learners must demonstrate the ability to interpret contract information, select appropriate resources, and apply safe working practices to achieve a weathertight, specification-compliant finish. Competence in this area is essential for ensuring structural integrity, thermal performance, and compliance with building regulations in off-site manufactured assemblies.

Highfield Level 2 NVQ Certificate in Construction using Off-site Manufactured Assemblies - Cold Formed Steel Frame (Assembly) (RQF)

1 learning outcomes8 guidance points

Moving, handling and storing resources in the workplace

This subtopic covers the essential skills required to safely and efficiently move, handle, and store construction resources, particularly cold-formed steel frame assemblies, in accordance with workplace information and legal requirements. Learners must demonstrate the ability to select appropriate resources, use correct manual handling techniques, and protect both materials and the environment from damage while meeting project timelines. Mastery of these procedures is critical for maintaining site safety, productivity, and the integrity of off-site manufactured components.

Highfield Level 2 NVQ Certificate in Construction using Off-site Manufactured Assemblies - Cold Formed Steel Frame (Assembly) (RQF)

1 learning outcomes9 guidance points

Preparing and assembling cold formed steel frames in the workplace

This subtopic focuses on the essential skills and knowledge required to prepare and assemble cold formed steel frames in an off-site manufacturing environment. Learners must interpret technical information, comply with legal and contractual requirements, and apply safe working practices to produce assemblies to the specified quality and timeframe. Practical application includes selecting and checking resources, minimising damage, and working efficiently to meet industry standards and project specifications.

Highfield Level 2 NVQ Certificate in Construction using Off-site Manufactured Assemblies - Cold Formed Steel Frame (Assembly) (RQF)

1 learning outcomes9 guidance points

Slinging, signalling and the movement of suspended loads in the workplace

This topic covers slinging, signalling, and moving suspended loads safely in construction. It includes interpreting information, organising work, selecting resources, and complying with procedures.

Highfield Level 2 NVQ Certificate in Construction using Off-site Manufactured Assemblies - Cold Formed Steel Frame (Assembly) (RQF)

1 learning outcomes6 guidance points

Tips and common mistakes

Common Exam Mistakes

Pitfalls to avoid in your exams

•Assuming that off-site environments have fewer hazards, leading to complacency in wearing PPE or reporting hazards.
•Confusing minor safety breaches as not worth reporting, failing to follow ‘report all’ culture.
•Overlooking the importance of welfare facilities (e.g., rest areas, toilets) when working in temporary off-site locations.
•Assuming communication is only verbal and neglecting written communication such as emails or memos.
•Failing to follow the correct sequence of work as per organisational procedures, leading to inefficiency or safety issues.
•Not maintaining records promptly or accurately, resulting in discrepancies.
•Ignoring the importance of building positive relationships, leading to conflicts or poor teamwork.
•Misinterpreting lapping direction on roof sheets, leading to water ingress against the prevailing weather side.

Top Examiner Tips

Expert advice for exam success

•Provide photographic evidence of yourself applying safety controls, such as P.P.E. use, cordoning off areas, and signing permits.
•Keep a reflective diary of daily safety observations to demonstrate continuous hazard awareness.
•Ensure your witness testimonies explicitly mention how you comply with security procedures, like checking staff passes.
•Provide specific examples of how you communicated effectively in your workplace, including any tools used (e.g., handover notes, toolbox talks).
•When describing planning, refer to actual organisational procedures you follow, such as permit-to-work systems or method statements.
•Ensure you can show evidence of record-keeping, such as completed forms or digital logs, and explain how they contribute to productivity.
•Highlight instances where you maintained good working relationships, especially during challenging situations, and the positive outcomes achieved.
•Provide clear photographic evidence of each stage, including pre-installation checks, fixing methods, and final alignment, with annotations explaining compliance with contract information.

Ready for a little practice?

Create your account to start practising Construction & Building Services.

7 days Premium · Then the free plan continues · No card, no charge