Skip to topic
    ← Back to course topics

    ETCAL Level 3 End Point Apprenticeship Assessment for ST0309 Print Technician v1.1 — ETCAL Vocational Manufacturing & Engineering

    The ETCAL Level 3 End Point Assessment for the ST0309 Print Technician v1.1 apprenticeship validates competence in pre-press, press, and post-press finishing operations across gravure, flexographic, lithographic, screen, or digital print processes. Candidates are assessed through a practical observation with questioning and a professional discussion supported by an occupational portfolio to confirm technical precision, safety, and quality management.

    Learning outcomes

    1. Understand key principles and core concepts of ETCAL Level 3 End Point Apprenticeship Assessment for ST0309 Print Technician v1.1.
    2. Apply practical knowledge, methods, and evaluation in ETCAL Level 3 End Point Apprenticeship Assessment for ST0309 Print Technician v1.1.

    Which command word is this?

    Carry out physical operations in the workplace safely, accurately, and in accordance with manufacturer technical data sheets and standard operating procedures (SOPs).

    ETCAL Level 3 End Point Apprenticeship Assessment for ST0309 Print Technician v1.1 assessment help

    Topic Overview

    The ETCAL Level 3 End Point Assessment for the ST0309 Print Technician v1.1 standard evaluates an apprentice's end-to-end capability in industrial printing environments. It encompasses raw material preparation, press configuration, live production monitoring, quality assurance through densitometry and colorimetry, and post-press finishing, underpinning critical manufacturing operations.

    Achieving this qualification demonstrates full occupational competence as a skilled print technician capable of operating complex machinery, troubleshooting substrate and ink defects, and upholding rigorous safety, environmental, and lean production standards within the UK print and packaging sector.

    Key Concepts
    • →Process colour theory, four-colour process (CMYK), spot colours, and colour management standards (ISO 12647 / Delta E metrics).
    • →Press mechanics and chemistry: ink-water balance in lithography, anilox selection in flexo, cylinder engraving in gravure, or toner/inkjet jetting dynamics in digital print.
    • →Quality control protocols including densitometry, dot gain (TVI), trapping, register alignment, and automated inspection systems.
    • →Health, safety, and environmental compliance: PUWER, COSHH regulations, risk assessments, VOC recovery/reduction, and safe mechanical isolation (LOTO).
    Assessment Guidance
    • 💡During the practical observation, narrate your health and safety checks out loud, explicitly confirming press guards, interlocks, emergency stops, and PPE before powering on machinery.
    • 💡Keep your portfolio structured chronologically with distinct tabs mapped to the ST0309 knowledge, skills, and behaviour criteria to allow rapid referencing during the professional discussion.
    Common Mistakes
    • Assuming Delta E and Solid Ink Density measure the same parameter; density measures light absorption (ink film thickness), whereas Delta E measures total perceptual colour difference across L*a*b* coordinates.
    • Believing makeready waste can be estimated casually; accurate paper stock calculations and yield accounting are mandatory competencies directly assessed during the EPA.
    • Thinking press cleaning chemicals are interchangeable; using incorrect washes on EPDM versus NBR rubber rollers can cause severe swelling, glazing, and premature roller degradation.
    Revision Plan
    1. 1Week 1 (Days 1-3): Review ST0309 standard KSBs, press chemistry (pH, conductivity, viscosity), and international quality standards (ISO 12647).
    2. 2Week 1 (Days 4-7): Practice equipment fault simulation, recording corrective actions for misregister, dot gain, picking, set-off, and hickeys.
    3. 3Week 2 (Days 8-10): Conduct mock practical setups under timed conditions, following strict SOPs, makeready logs, and safety checks.
    4. 4Week 2 (Days 11-14): Rehearse the professional discussion using the STAR technique, indexing every portfolio piece directly to specific assessment criteria.
    Exam Question Types
    • 📋Direct evaluation on the shop floor where the apprentice performs setup, makeready, print run, and maintenance; prepare to verbally justify adjustments to roller pressures, web tensions, or ink keys. - A structured, 60-90 minute technical interview reviewing 10-15 portfolio evidence pieces; focus responses on personal actions, decision-making rationales, and waste minimisation strategies.
    Command Word Expectations (ETCAL)
    Demonstrate

    Carry out physical operations in the workplace safely, accurately, and in accordance with manufacturer technical data sheets and standard operating procedures (SOPs).

    Explain

    Provide detailed technical reasoning behind actions, detailing the 'how' and 'why' using recognized scientific and engineering print terminology.

    Evaluate

    Appraise a production run, print defect, or workflow breakdown, assessing root causes, comparing corrective options, and validating outcomes against target tolerances.

    How Students Lose Marks (Examiner Pitfalls)
    Pitfall: Vague explanations of print fault diagnosis without referencing root-cause analysis or standard technical adjustment parameters.
    ❌ Weak Answer (Loses Marks):If there is dot gain or scumming on the sheet, I just adjust the ink keys or wipe down the blanket until it looks fine to the eye.
    Example improved answer:When identifying scumming or excessive dot gain, I first conduct densitometry measurements to compare tonal value increase against ISO 12647 targets. For scumming on an offset litho press, I check the dampening system conductivity and pH levels (maintaining pH 4.8 to 5.2), verify fountain solution delivery volumes, and assess roller nip pressures across form dampening rollers using feeler gauges to resolve ink-water balance issues systematically.
    Examiner Tip: Always cite measurable parameters such as ISO standards, pH ranges, conductivity values, and spectrophotometer readings (Delta E) rather than subjective visual checks.
    Pitfall: Treating the Professional Discussion as an informal chat rather than systematically mapping portfolio evidence to the Knowledge, Skills, and Behaviours (KSBs).
    ❌ Weak Answer (Loses Marks):I worked on lots of print jobs over the two years and my portfolio shows pictures of the presses I operated every day.
    Example improved answer:In project reference PR-04, I led the setup for a 5-colour flexographic packaging run. I cross-referenced the technical job ticket specifications to calculate anilox roll cell volume (cm3/m2) and selected solvent-based inks calibrated for viscosity using a Zahn Cup #2 at 21 seconds, ensuring complete compliance with client colour standards (Delta E under 1.5) and Health and Safety COSHH guidelines.
    Examiner Tip: Use the STAR method (Situation, Task, Action, Result) during the professional discussion and explicitly reference evidence documents by portfolio index numbers.
    Step-by-Step Worked Solutions

    Question: An apprentice is running an offset lithographic job of 15,000 sheets SRA2 130gsm gloss art paper. The job specification requires a cyan solid ink density (SID) of 1.45 +/- 0.05. A production spectrophotometer reading shows a density of 1.25 with a Delta E (dE*ab) of 3.8 against the master digital proof. Calculate the necessary correction, determine the likely root cause, and specify the verification steps to regain compliance.

    1. 1.Step 1: Identify given facts and tolerances. Target Cyan SID = 1.40 - 1.50 (1.45 +/- 0.05). Measured SID = 1.25. Target Delta E < 2.0 (commercial standard). Measured Delta E = 3.8. The measured density is 0.15 below the lower tolerance limit, resulting in unacceptable colour shift.
    2. 2.Step 2: Determine root cause and corrective mechanical action. Low density indicates an insufficient ink film thickness transferred to the substrate. The apprentice must adjust ink duct sweep or open individual ink keys corresponding to cyan across the press console, while verifying fountain solution balance is not emulsifying the ink.
    3. 3.Step 3: State implementation and verification procedure. Make incremental adjustments to the cyan ink feed on the console. Run 50 waste sheets to allow the ink train to stabilise. Pull a production sheet, measure cyan solid patches across all ink zones using a calibrated spectrophotometer/densitometer, and confirm SID falls within 1.40 to 1.50 and Delta E drops to below 2.0 before resuming production.
    Final Answer: Increase cyan ink duct keys/feed rate incrementally, run 50 sheets to stabilise the ink train, and verify with a calibrated spectrophotometer that SID reaches 1.40-1.50 and Delta E falls below 2.0.

    Question: A print technician is calculating the substrate requirement for a print run of 42,000 finished brochures. Each SRA1 press sheet yields 8 finished brochure sections. The pre-press and setup allowance requires 350 makeready sheets, and the estimated running waste allowance is 2.5%. Calculate the total gross number of SRA1 sheets required for the job.

    1. 1.Step 1: Calculate the net sheets needed for production. Net sheets = Total brochures / Yield per sheet = 42,000 / 8 = 5,250 net sheets.
    2. 2.Step 2: Calculate the running waste sheets. Running waste = 5,250 * 0.025 = 131.25 sheets (round up to 132 sheets to prevent under-runs).
    3. 3.Step 3: Sum the net sheets, makeready sheets, and running waste sheets to calculate gross requirement. Gross sheets = 5,250 (net) + 350 (makeready) + 132 (running waste) = 5,732 sheets.
    Final Answer: Total gross substrate requirement is 5,732 SRA1 sheets.
    Active Recall Memory Test
    What is the acceptable pH range and conductivity window for typical offset lithographic dampening solution?
    Key Fact: pH 4.8 to 5.2, with conductivity typically between 800 and 1500 microSiemens (depending on fount concentrate and raw water baseline).
    What does a Delta E (dE*ab) value calculate in colour measurement?
    Key Fact: The mathematical distance between two colours in the CIE L*a*b* colour space, representing the magnitude of total perceptual colour difference.
    What primary mechanism causes ink set-off on the delivery pile, and how is it prevented?
    Key Fact: Set-off occurs when wet ink transfers to the underside of the sheet above due to excess ink film or stack pressure; it is prevented by applying anti-set-off spray powder, adjusting pile height, and optimising IR/UV dryer settings.
    Frequently Asked Questions
    What is the difference between the ST0309 v1.0 and v1.1 standards?
    Version 1.1 provides updated alignment with modern automated print technologies, leaner makeready processes, enhanced digital control workflows, and refined grading criteria for the End Point Assessment components. It places a stronger emphasis on environmental sustainability, waste management, and digital measurement over purely manual operations.
    How long does the practical observation take during the ETCAL End Point Assessment?
    The practical observation typically takes between 3 to 4 hours depending on the print process and machine scale. The independent assessor observes pre-flight/pre-makeready checks, machine setup, running production to quality standards, and post-run maintenance procedures, asking clarifying questions throughout.
    What should be included in my ST0309 print technician portfolio?
    Your portfolio must contain genuine workplace evidence collected during the on-programme period, such as completed job tickets, densitometer/spectrophotometer QC logs, maintenance records, standard operating procedure checklists, risk assessments, witness testimonies, and annotated photographic evidence of print troubleshooting.
    Can I fail the EPA if I experience a print defect during the practical observation?
    Experiencing a defect does not automatically mean a fail. Assessors evaluate how safely, methodically, and quickly you identify the defect, diagnose the mechanical or chemical root cause, apply corrective adjustments, and verify the fix using measurement equipment.
    How are the final grades awarded for the Level 3 Print Technician apprenticeship?
    The apprenticeship is graded as Fail, Pass, or Distinction. To achieve a Distinction, you must meet all pass criteria and satisfy specific distinction-level grading criteria across both the Practical Observation with Questioning and the Professional Discussion, demonstrating exceptional depth of technical insight, autonomy, and continuous improvement.
    Unit assessment details

    Loading assessment details…