Skip to topic
    ← Back to course topics

    Assist with tests and checks of signalling equipment — EAL Vocational Motor Vehicle & Transport

    Learning outcomes

    1. 1 your organisation's safety management system1.2 relevant sections of the HASWA1.3 COSHH1.4 safe work plans1.5 SWL1.6 track access restrictions1.7 track work instructions1.8 track possession1.9 task risk control sheets1.10 current rule book1.11 regulations for working under OHLE and in the vicinity of DC lines(where appropriate)1.12 equipment disconnections1.13 manual handling regulations1.14 RIDDOR1.15 safety sign regulations1.16 PPE
    2. Identify the access requirements related to two of the following types of site installationlocations:2.1 trackside2.2 internal (such as signal box, equipment room)2.3 areas to which the public have access2.4 confined spaces2.5 elevated structures
    3. Follow all relevant diagrams, specifications and procedures for the equipment beingchecked or tested, including any applicable previous compliance information and assist inthe testing of:specifications
    Show all 11 objectives
    1. Ensure that testing activities comply with one of the following:3.1 infrastructure guidelines and standard operating procedures3.2 equipment manufacturer's documents3.3 BS, ISO and/or BS EN standards3.4 SMTH3.5 other industry specific signalling standards/specifications: ref: ( )equipment: check/test one of the following types of signalling equipment:3.6 points3.7 train control (such as signals or other method of authorising train movements)3.8 train detection (such as track circuits or axle counters)3.9 power supplies3.10 balises3.11 ETCS3.12 other industry specific signalling equipment: ref: ( )
    2. Identify the tests/checks to be carried out, the sequence in which they are to beperformed and the methods to be used and assist in the following checks/tests asapplicable to the type of signalling equipment being tested:Tests:4.1 continuity4.2 insulation4.3 earth arrangements4.4 interference4.5 correspondence4.6 function4.7 other industry specific signalling tests: ref: ( )Checks:4.8 inspection4.9 wire count4.10 security4.11 profile4.12 labelling4.13 correlation4.14 compliance to diagrams4.15 physical condition4.16 other industry specific signalling checks: ref: ( )
    3. Select and use all the correct tools and inspection equipment as applicable to theequipment being tested and check that they are in a useable condition and calibrated:5.1 calibrated hand tools5.2 un-calibrated hand tools5.3 calibrated test leads/loads5.4 computerised test equipment5.5 test recording equipment5.6 other specific signalling test equipment: ref: ( )
    4. Report any instances where the test and/or checks cannot be completed
    5. Take suitable precautions to ensure your activities do not interfere with the operationalsystem
    6. Ensure all testing and checking equipment and tools are removed or stored in line you’reyour organisation’s procedures
    7. Assist in reporting completion of compliance activities in line with your organisation’sprocedures, to include one of the following test record, and pass it to the appropriatepeople:9.1 job card9.2 SMTH9.3 test certificates9.4 test checklists9.5 test log and action report9.6 marked-up engineering drawings9.7 company reporting procedures9.8 other industry specific test/compliance records: ref: ( )
    8. Deal promptly and effectively with problems within your control and report those whichcannot be resolved

    Assist with tests and checks of signalling equipment assessment help

    Unit assessment details

    Loading assessment details…