Skip to topic
    ← Back to course topics

    Maintain traction and rolling stock air conditioning and ventilation systems — EAL Vocational Motor Vehicle & Transport

    Learning outcomes

    1. Work safely at all times, complying with health and safety and other relevant regulations, directives and guidelines
    2. Follow the relevant maintenance schedules to carry out the required work
    3. Carry out all of the following activities during the maintenance activities:3.1 plan and communicate the maintenance activities to ca
    Show all 17 objectives
    1. use minimal disruption to normal working3.2 obtain and use the correct issue of company and/or manufacturers' drawings and maintenance documentation3.3 adhere to procedures or systems in place for risk assessment, COSHH, personal protective equipment and other relevant safety regulations and procedures to realise a safe system of work3.4 ensure correct authorization to work on air conditioning system are in place3.5 ensure the safe isolation of equipment (such as mechanical, electricity, heating, and air sources)3.6 provide and maintain safe access and working arrangements for the maintenance area3.7 warn others in the maintenance area if they are at risk of injury from the system being tested3.8 carry out the maintenance activities using appropriate techniques and procedures3.9 re-connect and return the system to service on completion of the maintenance activities3.10 dispose of waste items in safe and environmentally acceptable manner, and leave the work area in a safe condition
    2. Carry out the system maintenance activities within the limits of your personal authority
    3. Carry out the system maintenance activities in the specified sequence and in an agreed timescale
    4. Report any instances where the maintenance activities cannot be fully met or where there are identified defects outside the planned schedule
    5. Carry out maintenance activities on all of the following types of equipment::7.
    6. air conditioning system7.
    7. temperature control system7.
    8. Carry out all of the following maintenance techniques, as appropriate to the equipment being maintained:8.1 marking/labelling of components8.2 dismantling equipment to unit/sub-assembly level 8.3 dismantling units to component level8.4 checking components for serviceability8.5 replacing damaged/defective components8.6 replacing all `lifed' items (such as filters, seals)8.7 setting, aligning and adjusting replaced components8.8 tightening fasteners to the required torque8.9 correct fitting of locking devices8.10 making `integrity' checks before powering up system8.11 testing the system for leaks8.12 functionally testing the completed system8.13 marking/labelling of components
    9. Maintain and/or replace a range of air conditioning/heating components to include twelve of the following:9.1 motors 9.2 ducting/trunking 9.3 manifolds/flanges 9.4 matrix’s9.5 thermostats9.6 dampers 9.7 silencers/attenuators9.8 insulation9.9 pumps 9.10 vents/diffusers 9.11 gaskets/seals9.12 electrical connectors9.13 valves 9.14 gauges/indicators 9.15 timers9.16 control relays9.17 chilled beams 9.18 filters 9.19 sensors 9.20 safety devices9.21 compressors9.22 condensers 9.23 pipe
    10. work 9.24 switches9.25 evaporators 9.26 couplings 9.27 heaters9.28 HVAC modules9.29 fans (supply and extraction)
    11. Maintain air conditioning and ventilation systems in compliance with one of the following:10.1 organisational guidelines and codes of practice 10.2 equipment manufacturer's operation range 10.3 BS, ISO and/or BSEN standards10.4 company standard operating procedures (SOP’s)10.5 documents such as technical procedures, vehicle maintenance instructions, vehicle overhaul instructions, workshop overhaul standards specifications
    12. Complete relevant system maintenance records accurately and pass them on to the appropriate person
    13. Complete the relevant paper
    14. work/records from one of the following, and pass it to the appropriate people:12.1 job cards12.2 permits to work/formal risk assessment and/or sign on/off procedures12.3 maintenance log or report12.4 company-speci

    Maintain traction and rolling stock air conditioning and ventilation systems assessment help

    Unit assessment details

    Loading assessment details…