Skip to topic
    ← Back to course topics

    Checking And Maintaining Car Tyre Pressure And Tread — SEG Awards Vocational Motor Vehicle & Transport

    Checking and maintaining car tyre pressure and tread depth ensures vehicle safety, legal compliance, and optimum handling on UK roads. Technicians must accurately use pressure gauges, depth gauges, and manufacturer data to prevent premature wear, blowouts, and hydroplaning.

    Learning outcomes

    1. Be able to use relevant tools and equipment safely.
    2. Be able to maintain tyres on a car.

    Which command word is this?

    Name or state a specific fact, tool, or condition without detailed discussion (e.g. identify the UK legal minimum tread depth).

    Checking And Maintaining Car Tyre Pressure And Tread assessment help

    Topic Overview

    Checking and maintaining car tyre pressure and tread depth is a fundamental skill within the SEG Awards Motor Vehicle & Transport qualification. This topic covers the technical inspection, measurement, and legal criteria that govern road safety and vehicle roadworthiness in the UK.

    Mastering tyre maintenance prepares learners to identify common suspension and alignment defects reflected in tyre wear patterns. It connects basic maintenance directly with braking efficiency, fuel economy, and customer duty of care in professional automotive workshops.

    Key Concepts
    • →UK Legal Minimum Tread Depth: 1.6mm across a continuous band covering the central three-quarters of the breadth of the tread around the entire outer circumference.
    • →Tyre Wear Indicators (TWIs): Raised rubber bars set at 1.6mm in the base of the tread grooves providing an instant visual warning of illegal wear.
    • →Wear Pattern Diagnostics: Centre wear indicates over-inflation, shoulder wear indicates under-inflation, and one-sided feathering indicates wheel alignment or camber errors.
    • →Cold Inflation Checking: Tyre pressures must be checked cold against the manufacturer placard (found on the door sill, B-pillar, or manual) using a calibrated gauge.
    Assessment Guidance
    • 💡Always reference specific measurement tools such as a calibrated digital or vernier tyre tread depth gauge and calibrated pressure gauge in written responses.
    • 💡State both units of measurement (Bar and PSI for pressure; millimetres for tread depth) to demonstrate professional vocational competence.
    Common Mistakes
    • Believing that the pressure stamped on the tyre sidewall is the recommended operating pressure; it is actually the maximum safe pressure the tyre can hold.
    • Assuming tread depth only matters at the exact centre rib, whereas UK law mandates 1.6mm across the central three-quarters of the tread width.
    • Thinking valve dust caps are purely decorative; they are vital secondary seals preventing road debris and water from damaging the Schrader valve core.
    Revision Plan
    1. 1Day 1-3: Memorise the exact UK legal requirements for passenger vehicle tyres (1.6mm rule, cuts, bulges, and ply cords).
    2. 2Day 4-6: Practice reading tread depth gauges across inner, centre, and outer tread positions on practical workshop vehicles.
    3. 3Day 7-9: Learn the four classic wear patterns (under-inflation, over-inflation, tracking misalignment, and camber wear) and their root causes.
    4. 4Day 10-14: Complete past SEG Awards exam questions focusing on inspection procedures, customer advice, and pressure adjustments.
    Exam Question Types
    • 📋Structured Inspection Scenarios: You are given tyre data or photos and asked to identify faults, explain the cause, and determine legality.
    • 📋Short Answer Technical Recall: Defining legal limits, identifying tools, or explaining safety reasons for checking cold pressures.
    • 📋Diagnostic Explanations: Explaining what causes specific tread wear patterns such as feathered edges or cupping.
    Command Word Expectations (SEG AWARDS)
    Identify

    Name or state a specific fact, tool, or condition without detailed discussion (e.g. identify the UK legal minimum tread depth).

    Explain

    Set out the cause and effect clearly; for instance, explain why driving on under-inflated tyres leads to premature shoulder wear.

    Describe

    Provide a step-by-step account of a workshop procedure, such as how to measure tread depth accurately with a depth gauge.

    How Students Lose Marks (Examiner Pitfalls)
    Pitfall: Stating that tyre tread depth must be measured only at the centre line, ignoring the continuous central band requirement.
    ❌ Weak Answer (Loses Marks):The tread depth has to be at least 1.6mm across the middle of the tyre.
    Example improved answer:In the UK, the legal minimum tread depth for passenger cars is 1.6mm throughout a continuous band comprising the central three-quarters of the breadth of the tread and around the entire outer circumference.
    Examiner Tip: Always specify 'central three-quarters' and 'entire outer circumference' to secure full technical marks.
    Pitfall: Failing to state that tyre pressures must be checked when tyres are cold, leading to inaccurate readings due to thermal expansion.
    ❌ Weak Answer (Loses Marks):Check the tyre pressures with a pressure gauge after taking the car for a long test drive.
    Example improved answer:Tyre pressures must be checked when the tyres are cold using an accurate pressure gauge, as friction causes tyres to warm up during driving, artificially increasing the internal air pressure.
    Examiner Tip: Explain the physical cause (heat causing gas expansion) when explaining why cold tyre readings are required.
    Step-by-Step Worked Solutions

    Question: A technician carries out a tyre inspection on a passenger car. The readings taken across the central three-quarters of the tyre tread are: Outer Shoulder: 1.4mm, Centre Tread: 1.8mm, Inner Shoulder: 1.5mm. Identify the type of tyre wear pattern, assess whether the tyre is legally compliant, and state the corrective workshop actions required.

    1. 1.Step 1: Identify given facts - Outer shoulder is 1.4mm, centre is 1.8mm, inner shoulder is 1.5mm. Both shoulders are worn below the legal limit of 1.6mm.
    2. 2.Step 2: Analyse the wear pattern - Accelerated wear on both outer edges relative to the centre indicates severe under-inflation.
    3. 3.Step 3: Evaluate legal compliance - The tyre fails the UK legal minimum requirement of 1.6mm across the central three-quarters of the breadth of tread.
    4. 4.Step 4: Formulate corrective action - The tyre must be condemned and replaced. Inspect the valve stem and rim for leaks, and inflate the new tyre to the vehicle manufacturer specification found on the B-pillar or fuel filler flap.
    Final Answer: The tyre exhibits shoulder wear caused by under-inflation and is illegal because both shoulders fall below the 1.6mm minimum. The tyre must be replaced, and the correct pressure set according to manufacturer specifications.

    Question: Explain the step-by-step procedure for safely checking and adjusting tyre pressure on a customer vehicle entering the workshop.

    1. 1.Step 1: Confirm tyres are cold (vehicle has been stationary for at least an hour or driven under 2 miles).
    2. 2.Step 2: Locate the manufacturer placard on the driver B-pillar, fuel filler cap, or owner manual to find the specified PSI or Bar rating for the current load condition.
    3. 3.Step 3: Remove the valve dust cap and attach a calibrated tyre pressure gauge square onto the Schrader valve stem without letting excess air escape.
    4. 4.Step 4: Read the gauge and compare against specification. If low, attach an air line and inflate in small bursts until target pressure is reached. If high, depress the central pin to bleed off excess air.
    5. 5.Step 5: Refit the valve dust cap securely to prevent grit and moisture ingress, and repeat the process for all remaining tyres including the spare.
    Final Answer: Check cold pressures against manufacturer data, adjust via calibrated gauge, and refit all dust caps securely to maintain valve integrity.
    Active Recall Memory Test
    What is the UK legal minimum tread depth for passenger cars?
    Key Fact: 1.6mm across the central three-quarters of the tread width around the entire circumference.
    What visual damage on a tyre sidewall results in an immediate MOT failure and tyre condemnation?
    Key Fact: Any cut, tear, or bulge exceeding 25mm or 10% of section width, or any damage exposing internal cords/ply.
    What wear pattern occurs when a vehicle is driven continuously on over-inflated tyres?
    Key Fact: Accelerated wear concentrated in the centre of the tread surface.
    Why must tyre pressure be measured when the tyre is cold?
    Key Fact: Driving heats the air inside the tyre, causing it to expand and give a falsely high pressure reading.
    Frequently Asked Questions
    Can I use a 20p coin to check if my tyre tread is legal?
    Yes, a 20p coin is a recognised quick test because the outer rim of the coin is approximately 1.6mm wide. If you insert the coin into the main tread grooves and the outer band is visible, your tyre may be below the legal limit and should be measured professionally. In a workshop exam context, however, you must reference a calibrated tread depth gauge rather than a coin.
    Where do I find the correct tyre pressure for a specific car?
    Recommended tyre pressures are set by the vehicle manufacturer, not the tyre brand. They are typically printed on a placard located on the driver-side B-pillar door jamb, inside the fuel filler flap, or in the vehicle handbook. Pressures vary depending on whether the car is carrying a standard load or a full passenger and luggage load.
    What happens if I drive with under-inflated tyres?
    Under-inflated tyres increase rolling resistance, which reduces fuel efficiency and leads to excessive CO2 emissions. Structurally, the tyre flexes excessively, building up dangerous levels of heat that can cause structural delamination or a catastrophic blowout. In terms of wear, under-inflation causes the outer shoulders of the tread to wear out much faster than the centre.
    Are tyre pressure monitoring systems (TPMS) mandatory on UK cars?
    Yes, all new passenger vehicles sold in the UK and EU since November 2014 must be fitted with an operational Tyre Pressure Monitoring System. If the TPMS warning lamp is illuminated or faulty during an MOT test on a vehicle registered after 1 January 2012, it results in a test failure.
    What is the difference between direct and indirect TPMS?
    Direct TPMS uses physical battery-powered pressure sensors mounted inside each wheel valve to transmit real-time pressure data to the engine control unit. Indirect TPMS does not use pressure sensors inside the wheel; instead, it relies on the vehicle Anti-lock Braking System (ABS) wheel speed sensors to detect when a deflated tyre rotates faster due to its reduced rolling radius.
    Unit assessment details

    Loading assessment details…