AQA · GCSE · Computer Science
Course version: 8525 · Version from Sept 2020
Fundamentals of computer networks: link layer.
The link layer is the lowest layer of the TCP/IP stack.
- Point 43 of 50
Study notes
From the teaching notes for this specification point.
The idea
The link layer is the lowest layer of the TCP/IP stack. It handles the physical transfer of data on the local network: taking data from the layer above, packaging it into frames, and sending it across the physical medium such as a cable or a wireless signal. It uses hardware (MAC) addresses to deliver frames to the correct device on that local network, and it deals with the hardware and drivers involved. It does not route packets between distant networks; that is the job of the internet layer above it. A useful method is to picture a frame carrying a source and destination MAC address that a switch reads to forward it to the right port on the same local network.
What earns the marks
- Identifies the link layer as the lowest layer of the TCP/IP stack, dealing with the physical transfer of data.
- States that the link layer packages data into frames for transmission over the physical medium.
- Recognises that the link layer uses MAC (hardware) addresses to deliver frames on the local network.
- Distinguishes link-layer local delivery from internet-layer routing between networks.
- Links the link layer to the physical medium and hardware such as network interface cards and switches.
Common mistakes and how to put them right
Confusing the link layer with the internet layer.
Put it right: The link layer delivers frames on the local network using MAC addresses, while the internet layer routes packets between networks using IP addresses.
Thinking the link layer routes packets across the internet.
Put it right: Routing between networks is handled by the internet layer, and the link layer only covers the local physical link.
Believing the link layer deals with end-to-end connections and reliability.
Put it right: Those are transport-layer concerns, while the link layer handles framing and local delivery.
Exam tips
- Remember the link layer is the bottom layer and is tied to the physical medium and hardware addresses.
- Use the pairing of frames with MAC addresses to identify link-layer descriptions in a question.
- Check whether a description mentions local delivery (link layer) or delivery between networks (internet layer) before choosing.
Try the lesson
The start of the Fundamentals of computer networks: link layer. lesson, made from teaching notes for this specification point.
Have a go first
Which of the following is the main responsibility of the link layer in a network?
There is more to this lesson
The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.
A week of Premium from your first lesson · Then the free plan continues · No card, no charge
Test your understanding of Fundamentals of computer networks: link layer.
Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.
A week of Premium from your first lesson · Then the free plan continues · No card, no charge