AQA · GCSE · Computer Science

    Course version: 8525 · Version from Sept 2020

    Fundamentals of computer networks: transport layer

    The transport layer is one of the layers in the TCP/IP stack studied in this section.

    • Point 41 of 50

    Study notes

    From the teaching notes for this specification point.

    The idea

    The transport layer is one of the layers in the TCP/IP stack studied in this section. It sits above the network layer and below the application layer, and its job is to move data between the correct processes on two communicating hosts. When a device runs several networked programs at once, the transport layer uses port numbers to decide which incoming data belongs to which program, so a web browser and an email client on the same machine each receive their own traffic. It can also split data into segments, add sequence information so segments can be reassembled in order, and request retransmission of anything lost.

    What earns the marks

    • Identifies the transport layer as the layer that provides end-to-end communication between processes on two hosts.
    • Recognises that port numbers are used to direct data to the correct application or service on a host.
    • States that the transport layer can segment data and reassemble it in the correct order at the destination.
    • Distinguishes the transport layer from the network layer, which handles addressing and routing of packets between networks.
    • Recognises that the transport layer can support reliable delivery by detecting loss and requesting retransmission.

    Common mistakes and how to put them right

    • Confusing the transport layer with the network layer.

      Put it right: The network layer routes packets between networks using IP addresses, while the transport layer manages end-to-end delivery to the right process.

    • Thinking the transport layer decides the physical path of signals.

      Put it right: Physical transmission belongs to the link layer, not the transport layer.

    • Assuming the transport layer only exists on servers.

      Put it right: Both hosts in a communication run transport-layer software.

    • Believing port numbers identify a device on the network.

      Put it right: IP addresses identify hosts, while port numbers identify the service or process on that host.

    Exam tips

    • Read the whole stem before choosing, because several options may describe real networking functions that belong to other layers.
    • Link each option to a single layer and eliminate any that describe routing, physical signalling or application-level behaviour.
    • When two options seem similar, choose the one that mentions end-to-end delivery between processes rather than delivery between networks.

    Try the lesson

    The start of the Fundamentals of computer networks: transport layer lesson, made from teaching notes for this specification point.

    Have a go first

    Which layer of the TCP/IP model is responsible for splitting data into segments and reassembling them at the destination?

    There is more to this lesson

    The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.

    Carry on with the full lesson

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge

    Test your understanding of Fundamentals of computer networks: transport layer

    Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.

    Take topic quiz

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge