AQA · GCSE · Computer Science
Course version: 8525 · Version from Sept 2020
Transport layer: this layer sets up the communication between the two…
Full specification wording
Fundamentals of computer networks: Transport layer: this layer sets up the communication between the two hosts and they agree settings such as the size of packets.
This statement describes the transport layer as the layer that establishes communication between two hosts and lets them agree settings, including the size of packets.
- Point 46 of 50
Study notes
From the teaching notes for this specification point.
The idea
This statement describes the transport layer as the layer that establishes communication between two hosts and lets them agree settings, including the size of packets. In practice the transport layer opens a connection or session between the sending and receiving processes, then both ends negotiate parameters that govern how data is sent. One agreed setting is the maximum amount of data carried in each segment, so the sender does not overwhelm the receiver or the network. The layer then segments the data according to that agreed size, numbers the segments and passes them down the stack. Remember that the agreement is between the two hosts' transport-layer software, not a decision made by a router in the middle of the network.
What earns the marks
- Identifies the transport layer as the layer that sets up communication between the two hosts.
- States that the two hosts agree settings before or during data transfer, rather than one host imposing them unilaterally.
- Recognises packet or segment size as an example of a setting agreed between the hosts.
- Explains that agreed settings help control how data is split and delivered so the receiver can handle it.
- Distinguishes this connection setup and negotiation from routing, which is handled by the network layer.
Common mistakes and how to put them right
Saying a router sets up the connection between hosts.
Put it right: The transport layer on the two hosts establishes the communication, while routers forward packets.
Treating packet size as fixed for all communications.
Put it right: The hosts agree settings such as packet size for that communication.
Confusing connection setup with physical cabling.
Put it right: The transport layer sets up a logical communication between processes, not the physical link.
Assuming only the sender chooses all settings.
Put it right: The two hosts agree the settings together.
Exam tips
- Look for the phrase about two hosts agreeing settings, which points to the transport layer rather than the application or link layer.
- Eliminate options that describe routing or physical transmission, since these belong to other layers.
- If an option mentions packet size negotiation, check whether it correctly credits both hosts with agreeing the setting.
Try the lesson
The start of the Fundamentals of computer networks: Transport layer: this layer sets up the communication between the two hosts and they agree settings such as the size of packets. lesson, made from teaching notes for this specification point.
Have a go first
Which layer of the TCP/IP stack is responsible for setting up communication between two hosts and agreeing settings such as packet size?
There is more to this lesson
The full lesson goes on to check your understanding and help you earn the marks. Create a free account to carry on, with your progress saved.
A week of Premium from your first lesson · Then the free plan continues · No card, no charge
Test your understanding of Fundamentals of computer networks: Transport layer: this layer sets up the communication between the two hosts and they agree settings such as the size of packets.
Active recall beats re-reading. Take an instant quiz now to test what you’ve learned and lock it into long-term memory.
A week of Premium from your first lesson · Then the free plan continues · No card, no charge