Skip to topic
    ← Back to course topics

    Acids, Alkilis and pH — Open Awards Vocational Applied Science

    Acids are substances that release hydrogen ions (H+) in aqueous solutions, whereas alkalis are soluble bases that release hydroxide ions (OH-). The pH scale measures the relative concentration of these ions from 0 to 14, determining whether a solution is acidic, neutral, or alkaline.

    Learning outcomes

    1. Know about acids, alkalis and pH

    Which command word is this?

    Give a factual account of the experimental procedure or process without offering reasons. For example, detail the exact steps needed to calibrate and use a pH meter.

    Acids, Alkilis and pH assessment help

    Topic Overview

    The study of acids, alkalis, and the pH scale forms a foundational pillar of chemical science and vocational laboratory practice. This topic explores the chemical definitions of Arrhenius and Bronsted-Lowry species, distinguishing between acids that donate protons (H+) and alkalis that yield hydroxide ions (OH-) in aqueous systems.

    Understanding these concepts enables applied science practitioners to safely manipulate chemical reagents, monitor environmental water quality, control industrial manufacturing processes, and execute accurate analytical titrations. Mastering pH measurements and neutralisation reactions underpins advanced study in chemical analysis, biochemistry, and pharmaceutical science.

    Key Concepts
    • →Acids dissociate in water to produce hydrogen ions (H+), whereas alkalis are water-soluble bases that release hydroxide ions (OH-).
    • →The pH scale runs from 0 to 14, where values below 7 indicate acidity, 7 is neutral, and values above 7 indicate alkalinity.
    • →Strength refers to the degree of ionisation/dissociation in water (complete vs partial), whereas concentration refers to the mass or moles of solute dissolved per unit volume.
    • →Neutralisation is the reaction between hydrogen ions and hydroxide ions to form water: H+(aq) + OH-(aq) -> H2O(l), accompanied by a metal or non-metal salt.
    Assessment Guidance
    • 💡Always specify state symbols (aq, l, s, g) when writing ionic equations for neutralisation to gain full communication marks.
    • 💡Distinguish clearly between quantitative instruments (pH meter/probe calibrated with buffers) and qualitative methods (litmus paper or universal indicator) when describing experimental design.
    • 💡Remember to convert volumes from cm3 to dm3 (by dividing by 1000) before performing any concentration calculations.
    Common Mistakes
    • Equating 'strong' with 'concentrated': Students often think a strong acid is simply one with very little water, whereas strength strictly refers to complete dissociation in solution, regardless of concentration.
    • Believing neutralisation always produces a solution of exactly pH 7: The resulting solution's pH depends on the relative strengths of the parent acid and base; a weak acid neutralised by a strong base produces an alkaline salt solution.
    • Assuming all bases dissolve in water: Many metal oxides and hydroxides (such as copper(II) oxide) are completely insoluble in water and are bases, not alkalis.
    Revision Plan
    1. 1Day 1-2: Review core definitions (acid, base, alkali) and write the ionic equations for dissociation and neutralisation.
    2. 2Day 3-4: Practise interpreting the pH scale, comparing indicators (phenolphthalein, methyl orange, universal indicator), and identifying their characteristic colours.
    3. 3Day 5-6: Solve mole, volume, and concentration titration calculations, focusing on 1:1 and 2:1 stoichiometry.
    4. 4Day 7: Complete timed past-paper questions focusing on practical experimental design and errors in pH measurement.
    Exam Question Types
    • 📋Calculation Questions: Titration and concentration problems requiring step-by-step mole conversions and stoichiometric ratios.
    • 📋Practical Method Design: Extended-response questions describing how to carry out a neutralisation experiment, indicator selection, or probe calibration.
    • 📋Data Interpretation: Analysing tables or graphs of pH curves to identify equivalence points and evaluate experimental anomalies.
    Command Word Expectations (OPEN AWARDS)
    Describe

    Give a factual account of the experimental procedure or process without offering reasons. For example, detail the exact steps needed to calibrate and use a pH meter.

    Explain

    Provide scientific reasons or causes. For example, explain why hydrochloric acid is classified as a strong acid while ethanoic acid is a weak acid by referencing degree of ionisation.

    Calculate

    Use mathematical operations to reach a numerical answer. You must show all working steps, unit conversions, and the final answer with appropriate units and significant figures.

    How Students Lose Marks (Examiner Pitfalls)
    Pitfall: Confusing the terms 'base' and 'alkali' or treating them as completely interchangeable without demonstrating understanding.
    ❌ Weak Answer (Loses Marks):A base is something that neutralises an acid and an alkali is just another word for a base.
    Example improved answer:All alkalis are bases, but not all bases are alkalis. A base is any substance that neutralises an acid to form a salt and water, whereas an alkali is specifically a base that dissolves in water to release hydroxide ions (OH-).
    Examiner Tip: Always remember the Venn diagram relationship: alkalis are a soluble subset of bases. State clearly that alkalis dissolve in water to release OH- ions.
    Pitfall: Stating that a lower pH means a solution is weaker or has fewer ions, failing to recognise the inverse logarithmic nature of the pH scale.
    ❌ Weak Answer (Loses Marks):A pH of 1 is weaker than a pH of 5 because 1 is a smaller number.
    Example improved answer:A solution with a pH of 1 is significantly more acidic than a solution with a pH of 5 because pH is inversely related to hydrogen ion concentration. A lower pH value indicates a higher concentration of H+ ions.
    Examiner Tip: Emphasise the inverse relationship: lower numerical pH values mean higher concentrations of aqueous H+ ions.
    Step-by-Step Worked Solutions

    Question: A laboratory technician titrates 25.0 cm3 of 0.100 mol/dm3 hydrochloric acid (HCl) with sodium hydroxide (NaOH) of concentration 0.200 mol/dm3. Calculate the volume of sodium hydroxide required to neutralise the acid completely.

    1. 1.Step 1: Write the balanced chemical equation to find the stoichiometric mole ratio: HCl + NaOH -> NaCl + H2O. The mole ratio of HCl to NaOH is 1:1.
    2. 2.Step 2: Calculate the moles of HCl used using Moles = Concentration x Volume (in dm3). Volume = 25.0 / 1000 = 0.025 dm3. Moles of HCl = 0.100 x 0.025 = 0.00250 mol.
    3. 3.Step 3: Determine moles of NaOH needed. Since the ratio is 1:1, moles of NaOH required = 0.00250 mol.
    4. 4.Step 4: Calculate the volume of NaOH solution required using Volume = Moles / Concentration. Volume = 0.00250 / 0.200 = 0.0125 dm3.
    5. 5.Step 5: Convert the volume back into cm3 by multiplying by 1000: 0.0125 x 1000 = 12.5 cm3.
    Final Answer: 12.5 cm3 of sodium hydroxide is required to completely neutralise the acid.

    Question: Describe a safe and valid experimental method to determine the pH of three unlabelled colourless solutions (A, B, and C) using universal indicator and a calibrated pH probe.

    1. 1.Step 1: Outline standard laboratory safety measures: wear splash-proof chemical goggles, a lab coat, and nitrile gloves.
    2. 2.Step 2: Calibrate the electronic pH probe using standard buffer solutions (pH 4.0, 7.0, and 10.0) and rinse the probe with deionised water between measurements.
    3. 3.Step 3: Transfer equal 10.0 cm3 samples of solutions A, B, and C into separate, clean boiling tubes.
    4. 4.Step 4: Add 2-3 drops of universal indicator to each sample, observe against a white tile, and compare the resulting colour with a standard pH colour chart to obtain an initial qualitative estimate.
    5. 5.Step 5: Immerse the rinsed pH probe into each sample, allow the reading to stabilise, and record the exact quantitative pH value to one decimal place.
    Final Answer: Use calibrated electronic pH probes alongside universal indicator against a white tile to collect precise, reproducible quantitative and qualitative pH data under appropriate PPE controls.
    Active Recall Memory Test
    What specific ion is responsible for acidity in aqueous solutions?
    Key Fact: The hydrogen ion (H+), also understood as the hydronium ion (H3O+).
    What is the net ionic equation for an acid-alkali neutralisation reaction?
    Key Fact: H+(aq) + OH-(aq) -> H2O(l)
    What colour does phenolphthalein indicator turn in an alkaline solution versus an acidic solution?
    Key Fact: Pink (or magenta) in alkaline solution, and colourless in acidic solution.
    What is the key chemical distinction between a strong acid and a weak acid?
    Key Fact: A strong acid dissociates completely in water, whereas a weak acid dissociates only partially.
    Frequently Asked Questions
    What is the difference between an alkali and a base?
    A base is any substance that reacts with an acid to produce a salt and water, which includes insoluble metal oxides and metal carbonates. An alkali is a specific type of base that is soluble in water, dissolving to release hydroxide ions (OH-). Therefore, all alkalis are bases, but insoluble bases are not alkalis.
    Why is a pH meter preferred over universal indicator in quantitative analysis?
    A calibrated pH meter provides objective, digital, quantitative readings accurate to one or two decimal places. Universal indicator relies on subjective visual assessment of colour against a printed chart, which introduces human error and only yields whole-number estimates. Furthermore, indicators can introduce slight chemical alterations to unbuffered test solutions.
    Can an acid have a pH value below 0 or above 14?
    Yes, extremely concentrated strong acids can have negative pH values (such as concentrated HCl with a pH around -1.0), and highly concentrated alkalis can have pH values exceeding 14. While standard school scales run from 0 to 14 based on dilute aqueous solutions at 25 degrees Celsius, the mathematical scale extends beyond these boundaries under extreme solute concentrations.
    What indicator should I choose for different acid-base titrations?
    Indicator choice depends on the pH at the equivalence point. For a strong acid with a strong base, either methyl orange or phenolphthalein works because the pH changes sharply across a wide range (pH 3 to 11). For a strong acid titrated with a weak base, methyl orange is chosen because the equivalence point is acidic (pH below 7). For a weak acid with a strong base, phenolphthalein is selected because the equivalence point occurs in the alkaline range (pH above 7).
    What does neutralisation actually produce?
    A standard neutralisation reaction between an acid and a metal hydroxide produces a chemical salt and water. If a metal carbonate is used as the base, the products are a salt, water, and carbon dioxide gas. The specific salt formed depends entirely on the combination of the metal in the base and the anion supplied by the acid.
    Unit assessment details

    Loading assessment details…