Skip to topic
    ← Back to course topics

    Catalysts — AQA GCSE Chemistry

    Catalysts explained

    Catalysts covers 5 specification points, including Catalysts change the rate of chemical… and Enzymes act as catalysts in biological systems..

    Read the full explanation

    Open a point below for its explanation and revision guidance.

    Catalysts change the rate of chemical reactions but are not used up during the reaction. Different reactions need different catalysts.

    A catalyst is a substance that increases the rate of a chemical reaction without being used up. It takes part in the reaction by providing an alternative route, but it is regenerated at the end, so its mass and chemical identity are unchanged. This means only a small amount is needed, and it can often be recovered and reused. Catalysts are specific: a catalyst that works for one reaction may have no effect on another, because the pathway it provides depends on the reactants and the mechanism. For example, manganese(IV) oxide catalyses the decomposition of hydrogen peroxide, while iron catalyses the Haber process; swapping them would not give the same rate increase. Catalysts are important in industry because they allow reactions to run at lower temperatures, saving energy and cost.

    Enzymes act as catalysts in biological systems.

    Enzymes are biological catalysts: proteins that speed up reactions in living organisms without being used up. They work in the same way as inorganic catalysts by providing an alternative pathway with a lower activation energy, but they are specific to particular substrates because their active site has a complementary shape. For example, catalase speeds up the breakdown of hydrogen peroxide into water and oxygen, and amylase breaks down starch into sugars. Enzymes operate under mild conditions of temperature and pH, and their activity is affected if these conditions change because the active site can be denatured. This links the general idea of catalysis to biological systems and shows that the same principles of collision theory and activation energy apply.

    Catalysts increase the rate of reaction by providing a different pathway for the reaction that has a lower activation energy.

    For a reaction to occur, colliding particles must have at least the activation energy, the minimum energy needed to start the reaction. A catalyst increases the rate by providing an alternative reaction pathway with a lower activation energy. With a lower energy barrier, a greater proportion of collisions has enough energy to react, so the frequency of successful collisions increases and the rate rises. The catalyst is not used up because it is regenerated at the end of the alternative pathway. On an energy profile diagram, the catalysed pathway has a lower peak than the uncatalysed pathway, but the energy of the reactants and products is unchanged, so the overall energy change is the same. This explains why a catalyst changes rate but not the position of equilibrium or the yield.

    A reaction profile for a catalysed reaction can be drawn in the following form: Students should be able to identify catalysts in reactions from their effect on the rate of reaction and because they are not included in the chemical equation for the reaction.

    A reaction profile plots energy against progress of reaction. For an uncatalysed reaction, the curve rises from the reactants' energy to a peak, the activation energy, then falls to the products' energy. A catalyst provides an alternative pathway with a lower activation energy, so the catalysed curve has a lower peak while the reactant and product energy levels stay unchanged. This means a greater proportion of collisions have at least the activation energy, so the rate increases. You can identify a catalyst because it speeds up the reaction but is not used up, so it is not written as a reactant or product in the chemical equation. For example, in the decomposition of hydrogen peroxide, manganese(IV) oxide speeds up the reaction but does not appear in the equation.

    Students should be able to explain catalytic action in terms of activation energy.

    Particles react when they collide with at least the activation energy. A catalyst provides an alternative reaction pathway with a lower activation energy. On a reaction profile, the catalysed curve has a lower peak than the uncatalysed curve, while the reactant and product energy levels remain the same. Because the energy barrier is lower, a greater proportion of collisions have enough energy to react, so the rate of reaction increases. The catalyst is not used up and is not included in the chemical equation. For example, manganese(IV) oxide lowers the activation energy for the decomposition of hydrogen peroxide, increasing the rate at which oxygen is produced.

    Your focus

    1. Define a catalyst and state that it is not used up during a reaction.
    2. Explain why different reactions need different catalysts.
    3. Describe an example of a catalyst used in a named reaction.
    Show all 15 objectives
    1. State that enzymes are biological catalysts.
    2. Describe how enzymes speed up reactions without being used up.
    3. Explain enzyme specificity in terms of the active site and substrate shape.
    4. Define activation energy and explain its role in reaction rate.
    5. Describe how a catalyst provides an alternative pathway with a lower activation energy.
    6. Explain why a catalyst increases rate without changing the overall energy change.
    7. Draw and label reaction profiles for catalysed and uncatalysed reactions, showing the lower activation energy for the catalysed pathway.
    8. Explain how a catalyst increases the rate of reaction in terms of activation energy and collision frequency.
    9. Identify a catalyst from information about its effect on rate and its absence from the chemical equation.
    10. Explain how a catalyst lowers the activation energy of a reaction.
    11. Relate lower activation energy to an increased proportion of successful collisions and a faster rate.
    12. Interpret reaction profiles to compare catalysed and uncatalysed pathways.

    Catalysts exam tips

    Marking Points
    • Define a catalyst as a substance that changes the rate of a reaction.
    • State that the catalyst is not used up and is regenerated at the end of the reaction.
    • Explain that different reactions require different catalysts because catalysts are specific.
    • Give a named example, such as manganese(IV) oxide for hydrogen peroxide decomposition or iron for the Haber process.
    • Link catalyst use to industrial benefits such as lower energy costs or faster production.
    • State that enzymes are biological catalysts, usually proteins.
    • Explain that enzymes speed up reactions without being used up.
    • Link enzyme action to a lower activation energy pathway, as with other catalysts.
    • Describe enzyme specificity using the active site and complementary substrate shape.
    • Give a named example such as catalase breaking down hydrogen peroxide or amylase breaking down starch.
    • Define activation energy as the minimum energy that colliding particles need to react.
    • State that a catalyst provides an alternative reaction pathway.
    • Explain that the alternative pathway has a lower activation energy.
    • Link the lower activation energy to a greater proportion of successful collisions and an increased rate.
    • Recognise that the overall energy change and the position of equilibrium are unchanged.
    • A reaction profile shows energy on the vertical axis and progress of reaction on the horizontal axis.
    • The catalysed pathway has a lower peak than the uncatalysed pathway, showing a lower activation energy.
    • The energy levels of the reactants and products are the same for catalysed and uncatalysed reactions.
    • A catalyst increases the rate of reaction by providing an alternative pathway with lower activation energy.
    • A catalyst is not used up during the reaction, so it is not included in the chemical equation.
    • Catalysts can be identified experimentally by comparing rates with and without the substance, and by checking that the substance is absent from the equation.
    • Activation energy is the minimum energy that colliding particles need to react.
    • A catalyst provides an alternative pathway with a lower activation energy.
    • The lower activation energy means a greater proportion of collisions are successful.
    • The rate of reaction increases because more particles have at least the activation energy.
    • The catalyst is not used up and is not included in the chemical equation.
    • On a reaction profile, the catalysed pathway has a lower peak but the same reactant and product energy levels.
    Examiner Tips
    • 💡When describing a catalyst, always include both ideas: changes rate and is not used up.
    • 💡Use a named example from the specification to support your answer, such as manganese(IV) oxide or iron.
    • 💡If asked about industry, link catalysts to lower temperature and reduced energy costs rather than to increased yield.
    • 💡Use the term biological catalyst when defining an enzyme.
    • 💡Link enzyme action to the same collision theory and activation energy ideas used for inorganic catalysts.
    • 💡If asked about conditions, mention that high temperature or extreme pH can denature the enzyme and stop it working.
    • 💡Use the phrase alternative pathway with a lower activation energy in your answer.
    • 💡On an energy profile diagram, draw the catalysed curve with a lower peak but the same reactant and product levels.
    • 💡Link the lower activation energy to more frequent successful collisions to explain the increased rate.
    • 💡Sketch both curves on the same axes and label the lower peak clearly as the catalysed pathway.
    • 💡When explaining rate increase, link the lower activation energy to a greater proportion of particles having enough energy to react.
    • 💡If asked to identify a catalyst, check that the substance speeds up the reaction and is absent from the chemical equation.
    • 💡Use the phrase 'alternative pathway with lower activation energy' when explaining catalytic action.
    • 💡Refer to the reaction profile and compare the heights of the peaks for catalysed and uncatalysed reactions.
    • 💡Link the lower activation energy to a greater proportion of successful collisions and therefore a faster rate.
    Common Mistakes
    • Saying the catalyst is used up or consumed; correct this by stating it is regenerated and its mass is unchanged.
    • Claiming any catalyst works for any reaction; correct this by explaining that catalysts are specific to particular reactions.
    • Stating that a catalyst increases the yield of a reversible reaction; correct this by explaining that it only changes the rate and does not change the position of equilibrium.
    • Saying enzymes are used up in the reaction; correct this by stating they are catalysts and are regenerated.
    • Claiming enzymes work for any substrate; correct this by explaining that the active site is specific to a complementary substrate.
    • Stating enzymes are inorganic catalysts; correct this by identifying them as biological catalysts, typically proteins.
    • Saying the catalyst lowers the activation energy of the original pathway; correct this by stating it provides a different pathway with a lower activation energy.
    • Claiming the catalyst increases the energy of the particles; correct this by explaining that it lowers the energy barrier instead.
    • Stating the catalyst changes the overall energy change or yield; correct this by explaining that reactants and products have the same energy and equilibrium is unchanged.
    • Drawing the catalysed curve with lower reactant or product energy levels; the correction is that only the peak is lowered, while reactant and product energies are unchanged.
    • Showing the catalyst as a reactant or product in the equation; the correction is that a catalyst is not included in the chemical equation because it is not used up.
    • Labelling the whole curve as activation energy; the correction is that activation energy is the energy difference between the reactants and the peak of the curve.
    • Saying a catalyst lowers the energy of the reactants; the correction is that it lowers the activation energy, not the reactant energy.
    • Saying a catalyst increases the energy of the particles; the correction is that it provides an alternative pathway with lower activation energy.
    • Saying a catalyst is used up; the correction is that it is not used up and is not included in the chemical equation.