Skip to topic
    ← Back to course topics

    Topic 7 – Rates of reaction and energy changes — Edexcel GCSE Chemistry

    Topic 7 covers the principles of collision theory, factors determining chemical reaction rates, and the thermodynamics of endothermic and exothermic reactions. Students explore quantitative rate measurements via graphical tangents alongside qualitative and mathematical bond energy calculations under Pearson Edexcel specifications.

    Your focus

    1. 7.8 Recall that enzymes are biological catalysts and that enzymes are used in the production of alcoholic drinks

    Which command word is this?

    Provide clear scientific reasons linked to particle behaviour and collision theory rather than just stating an observed outcome.

    Topic 7 – Rates of reaction and energy changes exam tips

    Topic Overview

    Topic 7 explores the physical and chemical principles that govern how rapidly chemical reactions occur and the thermodynamic energy transformations that accompany them. By investigating collision theory, students understand how temperature, concentration, surface area, pressure, and catalysts alter the frequency of successful collisions to control reaction speeds.

    This topic also provides a quantitative look into reaction energetics through reaction profile diagrams and bond energy calculations. Mastering these concepts is essential for understanding industrial chemical synthesis, such as the Haber process, where rate and yield must be balanced for safe and cost-effective manufacturing.

    Key Concepts
    • →Collision theory dictates that reactions occur only when particles collide with energy equal to or greater than the activation energy and in the correct orientation.
    • →Reaction rates depend on the frequency of successful collisions, which can be modified by adjusting concentration, pressure, surface area to volume ratio, or temperature.
    • →Catalysts provide an alternative reaction pathway with a lower activation energy, accelerating rates without being chemically consumed in the process.
    • →Exothermic reactions transfer thermal energy to the surroundings (Delta H is negative; products have lower potential energy), whereas endothermic reactions absorb thermal energy from the surroundings (Delta H is positive; products have higher potential energy).
    • →Bond breaking is always an endothermic process (requires energy input), while bond forming is always an exothermic process (releases energy).
    Examiner Tips
    • 💡When drawing reaction profile diagrams, ensure your activation energy arrow begins at the energy level of the reactants and points upward to the peak of the curve.
    • 💡In tangent calculations, draw a long tangent line spanning as much of the grid as possible to minimize reading errors and secure accuracy marks.
    • 💡Always state both the magnitude and the mathematical sign (+ or -) when writing final values for bond energy calculations.
    Common Mistakes
    • Believing catalysts participate by providing heat energy to particles; in reality, catalysts lower the activation energy barrier without supplying energy.
    • Confusing 'number of collisions' with 'frequency of collisions'; reactions only speed up if collisions occur more frequently per unit time.
    • Thinking that chemical bonds contain energy that is released upon breaking; breaking bonds always absorbs energy, while forming bonds releases energy.
    Revision Plan
    1. 1Days 1-3: Review collision theory definitions and revise the five factors affecting rates (concentration, pressure, surface area, temperature, catalysts).
    2. 2Days 4-6: Practice Core Practical techniques (measuring gas volumes using a gas syringe and the sodium thiosulfate 'disappearing cross' method).
    3. 3Days 7-9: Master rate graphs, including drawing tangents to curves and calculating instantaneous rates with appropriate units.
    4. 4Days 10-12: Learn exothermic and endothermic reaction profiles, practice drawing activation energy arrows, and complete five bond energy calculation problems.
    Exam Question Types
    • 📋Data analysis and graphing questions requiring students to plot experimental results, construct tangents, and calculate initial or instantaneous rates.
    • 📋Core practical evaluate-and-improve questions addressing sources of measurement error in precipitation or gas-collection experiments.
    • 📋Multi-step bond energy calculation problems with structured data tables, requiring clear working and identification of exothermic/endothermic status.
    • 📋Extended 6-mark comparative questions evaluating the effect of changing variables on the molecular level using collision theory.
    Command Word Expectations (PEARSON EDEXCEL)
    Explain

    Provide clear scientific reasons linked to particle behaviour and collision theory rather than just stating an observed outcome.

    Determine

    Use quantitative data or construct graphical tools (such as drawing a tangent and calculating its gradient) to find a numerical value.

    Compare

    Identify both similarities and differences between two reactions, curves, or reaction profiles, referencing specific data points or energy values.

    How Students Lose Marks (Examiner Pitfalls)
    Pitfall: Stating simply that increasing temperature makes particles 'collide more' without referencing collision frequency or activation energy.
    ❌ Weak Answer (Loses Marks):Higher temperature makes particles move faster so they collide more, which makes the reaction go faster.
    Example improved answer:Increasing the temperature increases the thermal energy store of the particles, causing them to move faster with higher kinetic energy. This leads to a higher frequency of collisions. Furthermore, a significantly greater proportion of colliding particles possess energy equal to or exceeding the activation energy, resulting in a higher frequency of successful collisions.
    Examiner Tip: Always write 'frequency of successful collisions' or 'rate of collisions' rather than just 'more collisions' to ensure maximum marks.
    Pitfall: Confusing the sign of overall energy change in bond energy calculations or forgetting that bond breaking is endothermic.
    ❌ Weak Answer (Loses Marks):Energy to break bonds is 2200 and energy made is 2500 so the answer is 300 kJ/mol and it is exothermic.
    Example improved answer:Total energy required to break bonds = +2253 kJ/mol (endothermic). Total energy released when forming new bonds = -2346 kJ/mol (exothermic). Overall energy change = 2253 - 2346 = -93 kJ/mol. Because the overall energy change is negative, more energy is released into the surroundings during bond formation than absorbed during bond breaking, confirming an exothermic reaction.
    Examiner Tip: Always structure bond energy calculations clearly under two distinct headings: 'Bonds Broken' and 'Bonds Formed', then apply: Delta H = (Bonds Broken) - (Bonds Formed).
    Step-by-Step Worked Solutions

    Question: A student reacted excess dilute hydrochloric acid with 0.50 g of calcium carbonate at 20 degrees Celsius. The volume of carbon dioxide produced was measured at regular intervals. At 40 seconds, a tangent drawn to the curve passes through coordinates (0 s, 18 cm^3) and (80 s, 54 cm^3). Calculate the instantaneous rate of reaction at 40 seconds, including suitable units.

    1. 1.Step 1: Recall the mathematical definition of rate from a curve gradient: Rate = Gradient = Change in y / Change in x.
    2. 2.Step 2: Identify the coordinates of the tangent line given in the question: (x1, y1) = (0, 18) and (x2, y2) = (80, 54).
    3. 3.Step 3: Calculate Change in y (volume change): 54 cm^3 - 18 cm^3 = 36 cm^3.
    4. 4.Step 4: Calculate Change in x (time change): 80 s - 0 s = 80 s.
    5. 5.Step 5: Compute gradient: 36 / 80 = 0.45.
    6. 6.Step 6: Determine the correct units: Volume (cm^3) divided by time (s) yields cm^3/s or cm^3 s^-1.
    Final Answer: The rate of reaction at 40 seconds is 0.45 cm^3/s.

    Question: Hydrogen reacts with chlorine according to the equation: H2(g) + Cl2(g) -> 2HCl(g). Using the following bond energies: H-H = 436 kJ/mol, Cl-Cl = 243 kJ/mol, and H-Cl = 432 kJ/mol, calculate the overall energy change for the reaction and state whether the reaction is endothermic or exothermic.

    1. 1.Step 1: Calculate the total energy required to break all reactant bonds: Energy absorbed = 1 x (H-H) + 1 x (Cl-Cl) = 436 + 243 = +679 kJ/mol.
    2. 2.Step 2: Calculate the total energy released when forming all product bonds: Energy released = 2 x (H-Cl) = 2 x 432 = 864 kJ/mol.
    3. 3.Step 3: Calculate the overall energy change (Delta H): Delta H = (Energy absorbed to break bonds) - (Energy released to make bonds) = 679 - 864 = -185 kJ/mol.
    4. 4.Step 4: Conclude thermodynamic direction based on the sign: Since Delta H is negative, more energy is released making bonds than taken in breaking them.
    Final Answer: The overall energy change is -185 kJ/mol; the reaction is exothermic.
    Active Recall Memory Test
    What is the precise definition of activation energy?
    Key Fact: The minimum amount of energy colliding particles must possess for a chemical reaction to occur.
    Is the chemical process of bond breaking endothermic or exothermic?
    Key Fact: Endothermic, because energy must be taken in from the surroundings to separate the bonded atoms.
    How does a catalyst lower the activation energy of a chemical reaction?
    Key Fact: By providing an alternative reaction pathway that requires less energy to proceed.
    What does a negative Delta H value indicate about a chemical reaction?
    Key Fact: It indicates that the reaction is exothermic and transfers thermal energy to the surroundings.
    Frequently Asked Questions
    Why is bond breaking endothermic if breaking things seems to release energy?
    In chemistry, atoms are held together by electrostatic attractions between positive nuclei and shared electrons. Overcoming these attractive forces requires an input of work and thermal energy from the surroundings, making bond breaking fundamentally endothermic. The sensation of energy release in explosions or fires comes from the subsequent formation of new, more stable bonds, which releases far more energy than was taken in to break the original bonds.
    What is the difference between mean rate and instantaneous rate of reaction?
    A mean rate measures the average speed over a given time interval, calculated simply as total change in reactant or product divided by total time elapsed. In contrast, an instantaneous rate represents the reaction speed at one specific second during the process. Instantaneous rate is found by drawing a tangent line to the concentration-time or volume-time curve at that exact point and calculating the gradient.
    How do I know if an experiment has finished from looking at a reaction rate graph?
    An experiment has reached completion when the graph line becomes completely horizontal (gradient equals zero). This indicates that the volume of gas, mass loss, or product concentration is no longer changing because at least one of the reactants has been completely used up (the limiting reactant). If the curve plateaus at different levels when varying conditions, check whether the limiting reactant quantity was altered.
    Why does doubling the concentration not always double the reaction rate exactly?
    In simple reactions, doubling concentration doubles the particle density per unit volume, which approximately doubles collision frequency. However, real-world rates can be governed by complex multi-step mechanisms where only certain intermediate collisions dictate the overall speed. Additionally, changes in temperature due to reaction energetics or limitations in surface area contact can alter the proportionality during practical measurements.
    How should I draw an activation energy arrow on an Edexcel reaction profile?
    Start your arrow exactly at the horizontal energy level representing the reactants. Draw the arrow pointing vertically upward to the absolute peak of the curve. Ensure you add an arrowhead at the top and clearly label it 'Activation Energy' or 'Ea'. Never draw the arrow starting from the products or from the bottom axis of the diagram, as this immediately loses the mark.