Skip to topic
    ← Back to course topics

    Topic 9 – Separate chemistry 2 — Edexcel GCSE Chemistry

    Topic 9 Separate Chemistry 2 for Pearson Edexcel GCSE covers transition metals, corrosion, quantitative molar gas volumes, atom economy, dynamic equilibrium compromises in the Haber process, fertilisers, and fuel cells. Mastering these concepts ensures confidence in high-tariff calculations and evaluative exam questions.

    Your focus

    1. 9.11C Explain why the alkanes are saturated hydrocarbons

    Which command word is this?

    Review information from multiple viewpoints, weigh pros and cons (e.g. fuel cells vs batteries), and provide a justified final conclusion.

    Topic 9 – Separate chemistry 2 exam tips

    Topic Overview

    Edexcel GCSE Chemistry Topic 9 brings together advanced inorganic, industrial, and analytical chemistry exclusive to the separate science qualification. It explores transition metal chemistry, alloy design, corrosion prevention, and industrial manufacturing routes such as the Haber process and fertiliser synthesis.

    The topic also focuses on quantitative chemical analysis, including titration concentration calculations, gas molar volumes, percentage yield, and atom economy. Students additionally examine electrochemical cells and modern hydrogen-oxygen fuel cells to evaluate sustainable energy solutions.

    Key Concepts
    • →Transition metals exhibit high densities, high melting points, catalytic activity, variable oxidation states, and form coloured compounds, distinguishing them from Group 1 alkali metals.
    • →Corrosion of iron (rusting) requires both oxygen and water, and can be prevented by barrier methods, sacrificial protection with more reactive metals, or galvanising.
    • →Quantitative chemical efficiency depends on percentage yield (actual yield / theoretical yield x 100) and atom economy (Mr of desired products / total Mr of all reactants x 100).
    • →Dynamic equilibrium compromise conditions in the Haber process (450 °C, 200 atm, iron catalyst) balance yield against reaction rate and plant construction costs.
    • →Hydrogen-oxygen fuel cells generate electricity by oxidising hydrogen to produce water, providing an efficient, low-emission alternative to rechargeable chemical cells.
    Examiner Tips
    • 💡Always convert solution and gas volumes from cm3 to dm3 by dividing by 1000 before inserting numbers into concentration or molar gas volume equations.
    • 💡When explaining industrial compromise conditions, always explicitly address both thermodynamic yield (Le Chatelier's principle) and kinetic rate (collision theory).
    Common Mistakes
    • Confusing corrosion with rusting: Rusting applies strictly to the degradation of iron and steel in the presence of water and oxygen, whereas corrosion describes the environmental degradation of any metal.
    • Believing 100% percentage yield implies 100% atom economy: A reaction can convert every gram of starting material into products (100% yield) but still have a low atom economy if unwanted by-products are formed.
    • Assuming catalysts alter the equilibrium position: An iron catalyst in the Haber process increases the rates of both forward and reverse reactions equally, reaching equilibrium faster without shifting the equilibrium yield.
    Revision Plan
    1. 1Day 1-2: Review transition metal properties, corrosion prevention mechanisms (barrier, sacrificial, galvanising), and alloy compositions.
    2. 2Day 3-4: Practise quantitative problem sets combining titration calculations, molar gas volume (24 dm3/mol), atom economy, and percentage yield.
    3. 3Day 5-6: Master the Haber process conditions, NPK fertiliser components, and the comparison of lab-scale versus industrial-scale ammonium sulfate production.
    4. 4Day 7: Write out balanced half-equations for hydrogen-oxygen fuel cells and complete comparative exam questions against rechargeable lithium-ion cells.
    Exam Question Types
    • 📋Multi-step quantitative calculations: Combining solution titrations, gas collection volumes, and atom economy calculations requiring clear working out.
    • 📋Six-mark compromise condition evaluations: Structuring coherent arguments explaining how temperature, pressure, and catalysts affect yield, rate, and cost in industrial processes.
    • 📋Comparative analysis questions: Evaluating the advantages and disadvantages of hydrogen fuel cells versus petrol engines or lithium batteries.
    Command Word Expectations (PEARSON EDEXCEL)
    Evaluate

    Review information from multiple viewpoints, weigh pros and cons (e.g. fuel cells vs batteries), and provide a justified final conclusion.

    Explain

    Give reasons based on chemical principles (e.g. why higher pressure increases yield because the system shifts to the side with fewer gas molecules).

    Calculate

    Perform mathematical steps clearly, stating equations, intermediate substitutions, correct significant figures, and relevant units.

    How Students Lose Marks (Examiner Pitfalls)
    Pitfall: Confusing atom economy with percentage yield, or neglecting stoichiometric balancing numbers when calculating the total Mr of all reactants.
    ❌ Weak Answer (Loses Marks):Atom economy is 50% because only half of the products we wanted were collected in the flask.
    Example improved answer:Atom economy is calculated as (total Mr of desired product / total Mr of all reactants) x 100. It measures theoretical reaction efficiency based on the balanced equation, regardless of the experimental mass collected.
    Examiner Tip: Always multiply the relative formula mass of each substance by its stoichiometric balancing coefficient when finding the total Mr of reactants in atom economy calculations.
    Pitfall: Claiming that 450 °C is selected in the Haber process because it gives the maximum yield of ammonia.
    ❌ Weak Answer (Loses Marks):A temperature of 450 °C is used because higher temperatures shift equilibrium forward to give the highest yield.
    Example improved answer:The forward reaction is exothermic, so a lower temperature yields more ammonia at equilibrium. However, lower temperatures give an unacceptably slow reaction rate. Therefore, 450 °C is chosen as an industrial compromise between acceptable yield and an economic rate of reaction.
    Examiner Tip: Structure industrial condition answers into two distinct parts: state what Le Chatelier predicts for yield, then state how collision theory influences the rate.
    Step-by-Step Worked Solutions

    Question: Calculate the volume of hydrogen gas, in dm3 at room temperature and pressure (r.t.p.), produced when 4.86 g of magnesium reacts completely with excess hydrochloric acid. (Equation: Mg(s) + 2HCl(aq) -> MgCl2(aq) + H2(g); Ar of Mg = 24.3; molar volume of gas at r.t.p. = 24.0 dm3/mol).

    1. 1.Step 1: Calculate the moles of magnesium reacting using moles = mass / Ar: moles of Mg = 4.86 / 24.3 = 0.200 mol.
    2. 2.Step 2: Use the stoichiometric ratio from the balanced equation to find moles of hydrogen produced: Mg : H2 is 1 : 1, so moles of H2 = 0.200 mol.
    3. 3.Step 3: Calculate the volume of gas produced using volume = moles x molar gas volume: volume of H2 = 0.200 x 24.0 = 4.80 dm3.
    Final Answer: 4.80 dm3 of hydrogen gas is produced at r.t.p.

    Question: In a titration, 25.0 cm3 of 0.150 mol/dm3 sodium hydroxide solution is neutralised by 18.75 cm3 of dilute sulfuric acid: 2NaOH(aq) + H2SO4(aq) -> Na2SO4(aq) + 2H2O(l). Calculate the concentration of the sulfuric acid in mol/dm3 and in g/dm3. (Relative formula mass, Mr, of H2SO4 = 98.0).

    1. 1.Step 1: Convert the volume of NaOH to dm3 and determine moles of NaOH: volume = 25.0 / 1000 = 0.0250 dm3; moles of NaOH = 0.0250 x 0.150 = 0.00375 mol.
    2. 2.Step 2: Determine moles of H2SO4 reacting using the molar ratio (2 NaOH : 1 H2SO4): moles of H2SO4 = 0.00375 / 2 = 0.001875 mol.
    3. 3.Step 3: Convert sulfuric acid volume to dm3 and find concentration in mol/dm3: volume = 18.75 / 1000 = 0.01875 dm3; concentration = 0.001875 / 0.01875 = 0.100 mol/dm3.
    4. 4.Step 4: Convert concentration from mol/dm3 to g/dm3 using mass conc = molar conc x Mr: concentration = 0.100 x 98.0 = 9.80 g/dm3.
    Final Answer: Concentration of H2SO4 is 0.100 mol/dm3 (or 9.80 g/dm3).
    Active Recall Memory Test
    What two essential environmental substances are required for the rusting of iron?
    Key Fact: Water and oxygen.
    What is the molar volume occupied by one mole of any gas at room temperature and pressure (r.t.p.)?
    Key Fact: 24 dm3 (or 24,000 cm3).
    What are the standard industrial compromise conditions used in the Haber process?
    Key Fact: 450 °C temperature, 200 atmospheres pressure, and an iron catalyst.
    What is the only chemical waste product produced by a hydrogen-oxygen fuel cell?
    Key Fact: Water (H2O).
    Frequently Asked Questions
    What is the difference between sacrificial protection and galvanising?
    Sacrificial protection involves attaching a more reactive metal (such as zinc or magnesium) to iron so that the more reactive metal oxidises preferentially. Galvanising is a specific type of protection where iron is coated in a layer of zinc; it acts as a physical barrier first, and if scratched, the exposed zinc still provides sacrificial protection.
    Why is higher pressure than 200 atm not used in the Haber process?
    Although Le Chatelier's principle predicts that higher pressure shifts equilibrium toward the side with fewer gas moles (increasing ammonia yield and reaction rate), pressures exceeding 200 atm require extremely thick, reinforced pipes and heavy-duty compressors. This significantly increases construction and maintenance costs, alongside escalating safety risks from potential plant explosions.
    How do you calculate atom economy when there are balancing numbers in the equation?
    You must include balancing coefficients when determining the total formula mass of reactants and products. For example, if the equation shows 2NaOH, you must multiply the relative formula mass of NaOH by 2 when adding up the total Mr of the reactants.
    Why are hydrogen fuel cells considered greener than petrol engines?
    Hydrogen fuel cells produce only water as a chemical emission during operation, eliminating toxic exhaust pollutants like carbon monoxide, nitrogen oxides, and greenhouse gases such as carbon dioxide. However, their overall environmental impact depends heavily on whether the hydrogen fuel was manufactured using renewable electrolysis rather than steam reforming of fossil methane.
    How does the industrial production of ammonium sulfate differ from laboratory preparation?
    In the laboratory, ammonium sulfate is made in small batches using dilute ammonia solution and dilute sulfuric acid in glassware, followed by titration indicators and slow crystallisation. Industrially, it is produced in a continuous, large-scale process using concentrated, pure ammonia gas and concentrated sulfuric acid in high-temperature reaction chambers to produce dry granulated powder directly.