Topic 10 – Electricity and circuits — Edexcel GCSE Combined Science
Topic 10 – Electricity and circuits explained
A voltmeter measures the potential difference across a component, and it must be connected in parallel with that component so it shares the same two points.
Read the full explanation
Connecting it in parallel means the voltmeter forms a separate branch across the component, so the p.d. between those points is measured without breaking the main circuit. The reading is in volts (V), the unit of potential difference. Contrast this with an ammeter, which is placed in series to measure current. In a circuit diagram, draw the voltmeter symbol across the component, with its two leads touching either side of it. If a voltmeter were connected in series, it would obstruct the current and give a misleading reading.
Your focus
- State that a voltmeter is connected in parallel with a component.
- Identify that a voltmeter measures potential difference (voltage) in volts.
- Distinguish the parallel placement of a voltmeter from the series placement of an ammeter.
Topic 10 – Electricity and circuits exam tips
Marking Points
- A voltmeter is connected in parallel with the component whose potential difference is being measured.
- Parallel connection means the voltmeter is across the same two points as the component, forming a separate branch.
- The quantity measured is potential difference (voltage), and its unit is the volt (V).
- An ammeter, by contrast, is connected in series to measure current, so the two meters are placed differently.
- In a circuit diagram the voltmeter symbol is drawn across (in parallel with) the component, not in the main line.
Examiner Tips
- 💡When asked how to connect a meter, name both the meter and its position: voltmeter in parallel, ammeter in series.
- 💡Always give the unit as volt (V) when stating what a voltmeter measures.
- 💡Sketch the voltmeter symbol across the component to show the parallel connection clearly.
Common Mistakes
- Thinking a voltmeter goes in series like an ammeter: correct this by stating a voltmeter is always in parallel across the component.
- Confusing the unit, writing amps for a voltmeter reading: correct this by stating potential difference is measured in volts (V).
- Placing the voltmeter across the whole circuit rather than the chosen component: correct this by connecting it across the two points either side of that component.