Skip to topic
    ← Back to course topics

    Topic 3 – Chemical change — Edexcel GCSE Combined Science

    Topic 3 – Chemical change explained

    This practical makes hydrated copper sulfate crystals from copper oxide and dilute sulfuric acid.

    Read the full explanation

    Warm the acid in a water bath, add copper oxide in small portions and stir until some solid remains, showing the acid is used up. Filter to remove the excess oxide, keeping the blue filtrate. Heat the filtrate in a water bath to evaporate some water and concentrate it, then leave it to cool so crystals form. Filter off the crystals and press them dry between filter papers. The water bath gives gentle, even heating and reduces spitting. 'Pure' means no leftover copper oxide; 'dry' means no surface water; 'hydrated' means the crystals contain water of crystallisation.

    Your focus

    1. Describe the sequence of steps to prepare pure, dry hydrated copper sulfate crystals from copper oxide.
    2. Explain why excess copper oxide is added and how it is removed.
    3. Explain the purpose of the water bath and of cooling in forming hydrated crystals.

    Topic 3 – Chemical change exam tips

    Marking Points
    • Copper oxide is added in excess to warm dilute sulfuric acid so that all the acid reacts, leaving unreacted solid to show the reaction is complete.
    • The mixture is filtered to remove the excess copper oxide, and the blue filtrate of copper sulfate solution is kept.
    • The filtrate is heated gently in a water bath to evaporate some water and concentrate the solution, not to boil it dry.
    • Cooling the concentrated solution allows hydrated copper sulfate crystals to form, which are then filtered off and pressed dry between filter papers.
    • A water bath provides gentle, even heating and reduces spitting or bumping compared with a direct flame.
    Examiner Tips
    • 💡State clearly why excess copper oxide is used: to ensure all the acid reacts so the product is pure.
    • 💡Name each separation step and its purpose: filtration removes excess oxide; evaporation concentrates; cooling crystallises; a second filtration collects crystals.
    • 💡Explain the role of the water bath as gentle, even heating that reduces spitting, rather than as a way to boil the solution dry.
    Common Mistakes
    • Thinking the excess copper oxide should be kept: it is removed by filtration because it has not reacted, and only the filtrate is wanted.
    • Evaporating the solution to complete dryness over a flame: this drives off water of crystallisation and decomposes the crystals, so the solution is only concentrated and then cooled.
    • Believing 'dry' crystals must be heated strongly: they are dried by pressing between filter papers, not by heating, which would remove the water of crystallisation.