Skip to topic
    ← Back to course topics

    Units of information — AQA GCSE Computer Science

    Units of information quantify digital data storage and network transmission, starting from a single binary digit (bit) up to petabytes. In AQA GCSE Computer Science, students must master conversions between data units using decimal prefixes (1,000) and binary prefixes (1,024), and calculate file storage requirements accurately.

    Units of information explained

    This is background reading, not a separate assessed skill.

    Read the full explanation

    It explains why the words kilobyte, megabyte, gigabyte and so on can be ambiguous. Historically, in computing, a kilobyte was often treated as 2¹⁰ bytes = 1024 bytes, a megabyte as 2²⁰ bytes = 1 048 576 bytes, and a gigabyte as 2³⁰ bytes = 1 073 741 824 bytes, because memory sizes are naturally organised in powers of 2. Decimal definitions instead use powers of 10: 1 kB = 1000 bytes, 1 MB = 1 000 000 bytes, 1 GB = 1 000 000 000 bytes. Read the note to understand the origin of the difference, then check which convention a question or data table is using before converting. You are not required to memorise a history essay; you should recognise that both usages exist and apply the one given in the task.

    Your focus

    1. Explain that kilobyte, megabyte and related terms have historically been used for powers of 2.
    2. Distinguish 1024-based binary usage from 1000-based decimal usage of the same unit names.
    3. Select and apply the appropriate convention when converting between units of information in a given task.

    Which command word is this?

    Perform mathematical steps to arrive at a numerical result. Working out must be shown, and correct units (e.g. MB, KiB, seconds) must be included.

    Units of information exam tips

    Topic Overview

    Units of information form the foundation of computer architecture and data representation. Everything in a computer system, from plain text to 4K video, is ultimately stored and processed as binary digits (bits). Understanding data units allows computer scientists to measure, compare, and optimise digital storage and network bandwidth.

    Within the AQA GCSE specification, students must understand the hierarchy of data capacities, from a single bit up to a petabyte. Mastering unit conversions and file capacity formulas is essential for tackling both standalone calculation questions and broader systems architecture problems.

    Key Concepts
    • →The basic hierarchy of data: Bit (b, single 0 or 1), Nibble (4 bits), Byte (B, 8 bits).
    • →Decimal prefixes (SI units): Kilobyte (kB = 10^3 = 1,000 bytes), Megabyte (MB = 10^6), Gigabyte (GB = 10^9), Terabyte (TB = 10^12), Petabyte (PB = 10^15).
    • →Binary prefixes (IEC units): Kibibyte (KiB = 2^10 = 1,024 bytes), Mebibyte (MiB = 2^20), Gibibyte (GiB = 2^30), Tebibyte (TiB = 2^40).
    • →Conversion mechanics: Multiply when converting from a larger unit to a smaller unit; divide when converting from a smaller unit to a larger unit.
    • →Formulas for calculating storage requirements: Image size = width * height * colour depth; Sound file size = sample rate * bit depth * duration * channels.
    Examiner Tips
    • 💡Before converting, identify whether the question uses powers of 2 (1024-based) or powers of 10 (1000-based) and write that choice down.
    • 💡Show the exponent step explicitly, e.g. 2¹⁰ = 1024 bytes in 1 KiB, so your method is visible.
    • 💡If a question does not specify, use the convention implied by the data given and say so briefly rather than guessing silently.
    • 💡Write out the full conversion ladder (bit -> byte -> kB -> MB -> GB) in the margin and show arrows to indicate whether you are multiplying or dividing.
    • 💡Always state the measurement unit explicitly next to every intermediate step to avoid mixing bits and bytes halfway through your calculation.
    • 💡If an exact numerical calculation is cumbersome and calculators are not permitted, clearly set out the calculation as a fraction or expression for full method marks.
    Common Mistakes
    • Assuming the historical power-of-2 usage is the only correct meaning: correction — both decimal (powers of 10) and binary (powers of 2) usages exist, so follow the convention stated in the question or context.
    • Treating 1 kilobyte as always exactly 1024 bytes in every context: correction — in decimal usage 1 kB = 1000 bytes, so state which convention you are applying.
    • Confusing the exponent with the multiplier, for example thinking 2¹⁰ means 20: correction — 2¹⁰ = 1024, and each further step multiplies by 2 again (2²⁰ = 1 048 576).
    • Mixing units within one calculation, such as dividing a binary-based megabyte figure by 1000: correction — keep one convention throughout a single conversion.
    • Assuming 1 Kilobyte is always 1,024 bytes: Historically, software used 1,024, but standard modern international standards define kB as 1,000 bytes and KiB as 1,024 bytes.
    • Treating bits and bytes interchangeably: Forgetting to divide bits by 8 when converting raw calculation results into bytes causes answers to be out by a factor of 8.
    • Incorrectly scaling units: Jumping directly between non-adjacent units (e.g., bits to Megabytes) in a single mental step rather than breaking down the calculation step-by-step.
    Revision Plan
    1. 1Day 1: Memorise the unit hierarchy in order (Bit, Nibble, Byte, kB/KiB, MB/MiB, GB/GiB, TB/TiB, PB/PiB) and their exact numerical multipliers.
    2. 2Day 2: Practice bit-to-byte conversions and download speed problems (converting Mbps to MB/s).
    3. 3Day 3: Master file capacity formulas for bitmaps (width * height * depth) and sound files (rate * depth * duration * channels).
    4. 4Day 4: Work through timed past paper exam questions from AQA Paper 1, ensuring all working out is legibly written.
    Exam Question Types
    • 📋Straightforward conversion questions: Asking for the number of bits in a given number of bytes or kilobytes.
    • 📋File size estimation questions: Calculating storage required for uncompressed images, audio recordings, or text files.
    • 📋Real-world data transfer scenarios: Calculating the time taken to download or stream a media file across a given network connection.
    Command Word Expectations (AQA)
    Calculate

    Perform mathematical steps to arrive at a numerical result. Working out must be shown, and correct units (e.g. MB, KiB, seconds) must be included.

    State

    Give a specific name, value, or brief fact without the need for detailed explanation or calculation steps.

    Explain

    Provide reasons or justification for why a specific data unit or file size outcome occurs, linking cause and effect.

    How Students Lose Marks (Examiner Pitfalls)
    Pitfall: Confusing bits (lower case 'b') with bytes (upper case 'B'), particularly in data transfer rate calculations.
    ❌ Weak Answer (Loses Marks):A 40 MB file will download in 4 seconds on a 10 Mbps connection because 40 divided by 10 is 4.
    Example improved answer:First, convert 40 Megabytes (MB) to Megabits (Mb): 40 * 8 = 320 Mb. Then divide the total bits by the network transfer speed: 320 Mb / 10 Mbps = 32 seconds.
    Examiner Tip: Always inspect the casing of 'b' vs 'B'. A Megabyte (MB) is 8 times larger than a Megabit (Mb). Convert all terms to bits before dividing to avoid off-by-factor-of-eight errors.
    Pitfall: Mixing decimal prefixes (base 10: kB, MB, GB) with IEC binary prefixes (base 2: KiB, MiB, GiB) without demonstrating which standard was used.
    ❌ Weak Answer (Loses Marks):To convert 2 GB into Megabytes, you multiply 2 by 1024.
    Example improved answer:Using standard decimal prefixes (SI/base 10): 2 GB = 2 * 1,000 MB = 2,000 MB. Alternatively, if using binary prefixes (IEC/base 2), 2 GiB = 2 * 1,024 MiB = 2,048 MiB. State your conversion factor clearly.
    Examiner Tip: AQA accepts both 1,000 and 1,024 for standard decimal unit conversions unless the question specifies Kibibytes (KiB) or mebibytes (MiB). Always show your calculation explicitly so you can gain method marks.
    Step-by-Step Worked Solutions

    Question: A bitmap image has a resolution of 1,200 pixels by 800 pixels with a colour depth of 16 bits. Calculate the uncompressed file size of the image in Megabytes (MB) using base 10 prefixes. Show all working.

    1. 1.Step 1: Calculate total number of pixels: 1,200 * 800 = 960,000 pixels.
    2. 2.Step 2: Calculate total bits by multiplying total pixels by the colour depth: 960,000 * 16 = 15,360,000 bits.
    3. 3.Step 3: Convert bits to bytes by dividing by 8: 15,360,000 / 8 = 1,920,000 bytes.
    4. 4.Step 4: Convert bytes to Megabytes (MB) using base 10 (1 MB = 1,000,000 bytes): 1,920,000 / 1,000,000 = 1.92 MB.
    Final Answer: 1.92 MB (or 1.83 MiB if using 1,024^2 bytes)

    Question: A music track lasts for 200 seconds. It is recorded with a sample rate of 44,100 Hz, a sample resolution of 16 bits, and in stereo (2 channels). Calculate the file size in Megabytes (MB) using decimal units. Show your working.

    1. 1.Step 1: Apply the sound file size formula: File Size (bits) = sample rate * resolution * seconds * channels.
    2. 2.Step 2: Substitute the known values: 44,100 * 16 * 200 * 2 = 282,240,000 bits.
    3. 3.Step 3: Convert bits to bytes by dividing by 8: 282,240,000 / 8 = 35,280,000 bytes.
    4. 4.Step 4: Convert bytes to Megabytes (base 10) by dividing by 1,000,000: 35,280,000 / 1,000,000 = 35.28 MB.
    Final Answer: 35.28 MB
    Active Recall Memory Test
    How many bits are in one nibble, and how many nibbles are in one byte?
    Key Fact: There are 4 bits in one nibble, and 2 nibbles in one byte.
    What is the difference between a Megabyte (MB) and a Mebibyte (MiB)?
    Key Fact: A Megabyte (MB) uses decimal base 10 (1,000,000 bytes or 10^6), while a Mebibyte (MiB) uses binary base 2 (1,048,576 bytes or 2^20).
    What formula calculates the file size in bits of an uncompressed bitmap image?
    Key Fact: Width in pixels * Height in pixels * Colour depth in bits.
    What formula calculates the uncompressed file size in bits of a digital sound recording?
    Key Fact: Sample rate (Hz) * Sample resolution (bits) * Duration (seconds) * Number of channels.
    Frequently Asked Questions
    Does AQA penalise students for using 1,024 instead of 1,000?
    No, AQA mark schemes generally accept both base 10 (1,000) and base 2 (1,024) multipliers for standard decimal prefix units like kB and MB unless the question specifically requires binary prefixes (KiB/MiB). However, you must show your working clearly so the examiner can see which base factor you applied.
    What is the abbreviation for a bit versus a byte?
    A lower case 'b' represents a bit, whereas an upper case 'B' represents a byte. For example, 100 Mbps stands for 100 Megabits per second, while 100 MB represents 100 Megabytes.
    Why did computer scientists create kibibytes and mebibytes?
    Historically, the computer industry used decimal prefixes (kilo-, mega-) to mean powers of 2 (1,024, 1,048,576), which created confusion with the International System of Units (SI) where 'kilo' strictly means 1,000. The International Electrotechnical Commission (IEC) introduced binary prefixes like kibibyte (KiB) and mebibyte (MiB) to eliminate ambiguity.
    How do I calculate how long a file will take to download?
    First ensure the file size and network speed are expressed in the same fundamental unit, usually bits or Megabits. If the file size is given as 50 MB, convert it to Megabits by multiplying by 8 (50 * 8 = 400 Mb). Then, divide the file size by the download speed (e.g., 400 Mb / 50 Mbps = 8 seconds).
    What comes after Terabyte in the AQA syllabus?
    After Terabyte (TB / TiB) comes Petabyte (PB / PiB). 1 Petabyte is equal to 1,000 Terabytes (or 1,024 Tebibytes if using binary prefixes).