Construction EPA Company Vocational Construction & Building Services
Explore your units, one topic at a time.
Course overview
The CONSTRUCTION-EPA-COMPANY Vocational Construction & Building Services specification covers 1 topic with 2 learning objectives (610/1351/1). Use the topic browser below to explore subtopics, exam tips, common mistakes, and key terminology for each area of the course.
- 1 topic
- 2 learning objectives
Course version · 610/1351/1Version from Sept 2020Change version
Choose your course version: the course code is on your timetable or a past paper. Not sure? We’ll start you on the most likely version when you sign up.
- Version from Sept 2020610/6607/2 · Construction EPA Company Level 2 Foundation Apprenticeship Assessment Qualification FA0001 Building Service Engineering
- Version from Sept 2020610/6608/4 · Construction EPA Company Level 2 Foundation Apprenticeship Assessment Qualification FA0002 Finishing Trades
- Version from Sept 2020610/6609/6 · Construction EPA Company Level 2 Foundation Apprenticeship Assessment Qualification FA0003 Onsite Trades
- Version from Sept 2020610/1352/3 · Construction EPA Company Level 4 End Point Assessment Construction Site Supervisor
- Version from Sept 2020610/1901/X · Construction EPA Company Level 2 End Point Assessment Plasterer
- Version from Sept 2020610/1903/3 · Construction EPA Company Level 2 End Point Assessment Wall and floor tiler
- Version from Sept 2020610/5170/6 · Construction EPA Company Level 3 End Point Assessment Low Carbon Heating Technician
- Version from Sept 2020610/1331/6 · Construction EPA Company Level 2 End Point Assessment Painter and Decorator
- Version from Sept 2020610/1351/1 · Construction EPA Company Level 4 End Point Assessment Construction Quantity Surveying Technician
- Version from Sept 2020610/1902/1 · Construction EPA Company Level 2 End Point Assessment Carpentry and joinery
- Version from Sept 2020610/1905/7 · Construction EPA Company Level 2 End Point Assessment Roofer
- Version from Sept 2020610/1929/X · Construction EPA Company Level 2 End Point Assessment Groundworker
- Version from Sept 2020610/1911/2 · Construction EPA Company Level 2 End Point Assessment Bricklayer
- Version from Sept 2020610/1930/6 · Construction EPA Company Level 2 End Point Assessment Interior systems installer
- Version from Sept 2020610/1347/X · Construction EPA Company Level 3 End Point Assessment Building Services Engineering Service and Maintenance Engineer
- Version from Sept 2020610/1353/5 · Construction EPA Company Level 6 End Point Assessment Design and Construction Management
- Version from Sept 2020610/1893/4 · Construction EPA Company Level 2 End Point Assessment Floorlayer
- Version from Sept 2020610/1349/3 · Construction EPA Company Level 3 End Point Assessment Gas Engineering Operative
- Version from Sept 2020610/1931/8 · Construction EPA Company Level 3 End Point Assessment Craft Carpentry and joinery
- Version from Sept 2020610/4154/3 · Construction EPA Company Level 3 End Point Assessment Construction Support Technician
- Version from Sept 2020610/5166/4 · Construction EPA Company Level 2 End Point Assessment Fenestration Installer
- Version from Sept 2020610/5169/X · Construction EPA Company Level 3 End Point Assessment Craft Plasterer
- Version from Sept 2020610/5168/8 · Construction EPA Company Level 3 End Point Assessment Craft Painter and Decorator
- Version from Sept 2020610/6604/7 · Construction EPA Company Level 2 End Point Assessment Fitted Interiors Installer
- Version from Sept 2020610/6605/9 · Construction EPA Company Level 2 End Point Assessment Insulation Installation Operative
Official Regulatory Specification
Regulated by the Office of Qualifications and Examinations Regulation (Ofqual) in England
- Qualification Number (QN)
- 610/1351/1
- Awarding Organisation
- Construction EPA Company
- Regulatory Type
- End-Point Assessment
- National Level & Units
- Vocational • 1 unit
- 1
- topics
Qualification Units
How this qualification is graded
Assessment follows the awarding organisation’s published requirements. Check the exact unit methods and grading rules with your provider.
About this course
About Construction EPA Company Vocational Construction & Building Services
This Construction & Building Services qualification from Construction EPA Company Apprenticeship Assessment is designed for apprentices working towards their end-point assessment (EPA) in the construction sector. It covers a broad range of knowledge, skills, and behaviours required for a successful career in building services engineering, including areas such as heating, ventilation, air conditioning, plumbing, and electrical systems.
The course is structured around the apprenticeship standard, with a focus on practical competence and underpinning theory. Students will develop a deep understanding of health, safety, and environmental regulations, as well as the technical principles of building services. The assessment process is rigorous and ensures that apprentices are fully prepared for their EPA, which is the final gateway to achieving their apprenticeship qualification.
Assessment Structure
The assessment for this qualification is the end-point assessment (EPA), which is conducted by Construction EPA Company. It typically consists of two main components: a knowledge test and a practical observation with professional discussion. The knowledge test is a multiple-choice or short-answer exam covering the core technical knowledge from the apprenticeship standard. The practical observation takes place in the workplace and assesses the apprentice's ability to perform real tasks to industry standards. This is followed by a professional discussion, where the apprentice explains their work and decisions. The EPA is graded on a pass, merit, or distinction scale, and apprentices must pass all components to achieve their overall grade.
Why Choose Construction EPA Company?
- Construction EPA Company is a specialist end-point assessment organisation (EPAO) that focuses exclusively on construction apprenticeships, meaning their assessors have deep industry expertise and understand the specific demands of the construction sector.
- Their EPA process is designed to be flexible and supportive, with clear guidance and resources for apprentices and employers, helping to reduce stress and ensure apprentices can demonstrate their best work.
- The company is known for its rigorous yet fair assessment methods, which are aligned with the latest industry standards and employer expectations, giving apprentices a strong foundation for their future careers.
Frequently Asked Questions
What is the Construction EPA Company Apprenticeship Assessment Qualification in Construction & Building Services?
How is the end-point assessment (EPA) structured for this qualification?
What topics will I need to revise for the knowledge test?
How can I prepare for the practical observation part of the EPA?
What happens if I do not pass my EPA on the first attempt?
Ready for a little practice?
Create your account to start practising Construction & Building Services.
A week of Premium from your first lesson · Then the free plan continues · No card, no charge