Design strategies - Explore and develop their own ideas — AQA GCSE Design and Technology
Design strategies - Explore and develop their own ideas explained
An iterative process means cycling repeatedly through stages rather than following a single straight line.
Read the full explanation
To explore and develop their own ideas, a designer typically generates a concept, makes a model or prototype, tests or evaluates it against the brief and specification, then feeds the findings back into a revised concept and repeats. Each loop should record what was learned and what changed, so the folder shows progression from a rough idea to a refined solution. For example, a learner might sketch a phone stand, make a card model, find it tips over, widen the base, retest and record the improvement. In an MCQ, choose the option that describes repeated cycles of design, make, test and improve with feedback, and reject options describing a single one-way sequence with no evaluation or revision.
Your focus
- Describe the stages of an iterative design cycle
- Explain how testing and evaluation feedback drives revision of an idea
- Identify evidence in a design folder that shows repeated cycles of development
Design strategies - Explore and develop their own ideas exam tips
Marking Points
- Defines an iterative process as repeated cycles of generating, making or modelling, testing and improving ideas
- Identifies feedback from testing or evaluation as the trigger for revising a concept in the next cycle
- Selects the option that shows ideas developing progressively through several loops rather than a single linear sequence
- Recognises that recording what changed at each stage evidences exploration and development of the learner's own ideas
- Rejects the option describing a one-way process with no evaluation or revision step
Examiner Tips
- 💡Look for options containing words such as cycle, feedback, test, evaluate and refine, which signal an iterative process
- 💡Reject options that describe a linear sequence ending at the first solution with no review
- 💡Check that the chosen option includes acting on evaluation findings, not just producing a model
Common Mistakes
- Describes the design process as a single straight line from brief to final product; explain that iteration requires returning to earlier stages with new information
- Treats iteration as simply making the same idea again; clarify that each cycle must use evaluation feedback to change or improve the concept
- Omits recording of test results and changes; point out that evidence of each loop is what shows idea development