Tolerances — AQA GCSE Design and Technology
Tolerances explained
A tolerance is the acceptable range of variation on a specified dimension, so a part still functions when it is not exactly to nominal size.
Read the full explanation
Working accurately using tolerances means reading a drawing's stated limits, measuring with suitable instruments, and judging whether a measured value falls inside the permitted range. For example, a hole specified as 10.0 mm ± 0.2 mm is acceptable between 9.8 mm and 10.2 mm; a reading of 10.3 mm is out of tolerance and must be reworked or rejected. Learners should distinguish tight tolerances (needed for precise fits, costing more) from loose tolerances (cheaper, adequate where fit is not critical), and should record measurements and compare them against the limits rather than guessing.
Your focus
- Define tolerance and calculate upper and lower limits from a stated dimension
- Judge whether a measured value is within tolerance and state the consequence
- Explain how tolerance choice relates to function, precision and cost
Tolerances exam tips
Marking Points
- Defines a tolerance as the acceptable range of variation on a specified dimension
- Calculates the upper and lower limits from a stated nominal size and tolerance, for example 10.0 mm ± 0.2 mm giving 9.8 mm to 10.2 mm
- Judges whether a measured value falls within the permitted range and states the consequence if it does not
- Explains why tighter tolerances cost more and are used only where fit or function demands them
- Selects a suitable measuring instrument and reads it accurately to check a dimension against its limits
Examiner Tips
- 💡Show the arithmetic for upper and lower limits clearly so the examiner can follow your reasoning
- 💡State the units with every dimension and keep them consistent
- 💡Link tolerance choice to function and cost rather than giving a definition alone
Common Mistakes
- Treats the tolerance as a single target value; read it as a permitted range around the nominal size
- Forgets to apply the tolerance to both directions; calculate both upper and lower limits
- Ignores the consequence of an out-of-tolerance part; state whether it is reworked, rejected or accepted