Skip to topic
    ← Back to course topics

    Forces and stresses — AQA GCSE Design and Technology

    Forces and stresses explained

    Forces act on products whenever they are used, stored or loaded, and the resulting stresses decide whether a design survives.

    Read the full explanation

    Choose one material category (for example papers and boards, timber, metals, polymers or textiles) or one system (for example a frame or a mechanism) and trace how a force applied to it produces an internal stress. Then explain how the material or system is changed to cope: reinforcement adds material or a stronger element, such as glass fibres in a polymer composite or a rib across a moulding, while stiffening raises resistance to bending, for example by adding a fold, a triangulated brace or a deeper section. Link each change to the specific stress it resists, and note that stiffening a component can move stress elsewhere, so the whole product must be checked.

    Your focus

    1. Identify a material category or system and the forces acting on it.
    2. Explain how reinforcement and stiffening each reduce the effect of a named stress.
    3. Evaluate whether a modification solves the stress problem across the whole product.

    Forces and stresses exam tips

    Marking Points
    • Identifies a named material category or system and states the force acting on it.
    • Explains how the applied force produces a stress within the material or system.
    • Describes a reinforcement method and links it to the stress it resists.
    • Describes a stiffening method and distinguishes it from reinforcement.
    • Recognises that a change in one part can transfer stress to another part of the product.
    Examiner Tips
    • 💡Read the question to see whether it asks about a material category or a system, and answer within that scope.
    • 💡Use one concrete product example and name the force, the stress and the modification in a single chain of reasoning.
    • 💡Eliminate options that describe a material property without linking it to a force or stress.
    Common Mistakes
    • Treats reinforcement and stiffening as the same thing; distinguish adding stronger material from increasing resistance to bending.
    • Names a material without saying which force or stress is involved; always pair the material with the load it carries.
    • Assumes a stiffened part cannot fail; check that stress has not simply moved to a joint or adjacent component.