Skip to course topics

    Eduqas GCSE Design and Technology

    Explore your course, one topic at a time.

    Course overview

    The EDUQAS GCSE Design and Technology specification covers 86 topics with 0 learning objectives (WJEC-GCSE-Design-and-Technology). Use the topic browser below to explore subtopics, exam tips, common mistakes, and key terminology for each area of the course.

    • 86 topics
    Course WJEC-GCSE-Design-and-Technology
    86
    topics

    Explore your topics

    86 topics

    Course topics86 topics

    12 of 86 shown

    About this course

    About Eduqas GCSE Design and Technology

    This Eduqas GCSE in Design and Technology offers a broad and creative exploration of the design process, from identifying user needs to manufacturing high-quality prototypes. You will develop practical skills in a range of material areas, including timbers, metals, polymers, and textiles, while learning to think critically about design in the 21st century.

    The specification is structured around core technical principles, specialist material knowledge, and iterative design and make tasks. You will study how products are designed for different users and purposes, considering sustainability, ergonomics, and the impact of new technologies. Assessment combines a written exam with a substantial non-examined assessment (NEA), where you undertake a design-and-make project of your choice.

    Assessment Structure

    The Eduqas GCSE Design and Technology qualification is assessed through two components. Component 1 is a written examination worth 50% of the qualification, with 100 marks available. The exam lasts 2 hours and includes a mix of multiple-choice, short-answer, and extended-response questions that test your knowledge of core technical principles, specialist material areas, and design and make principles. Component 2 is a non-examined assessment (NEA) worth 50% of the qualification, with 100 marks. This is a design-and-make task where you produce a portfolio of evidence and a final prototype, based on a contextual challenge set by the exam board. The NEA is internally assessed and externally moderated.

    Why Choose Eduqas?

    • Eduqas offers a clear and manageable structure, with a single written paper and one NEA, allowing you to focus your revision and project work without the complexity of multiple exam papers.
    • The specification encourages creativity and practical skill development, with a strong emphasis on iterative design and the use of modern technologies such as CAD/CAM, which can help you stand out in coursework.
    • Eduqas provides a wide range of freely available digital resources, including past papers, mark schemes, and interactive revision tools, making it easier to prepare effectively for the exams.

    Frequently Asked Questions

    What is the difference between the Eduqas GCSE Design and Technology and the old D&T GCSE?
    The new Eduqas GCSE (9-1) is more rigorous and focuses on the full design process, from research to evaluation. Unlike the old coursework-based approach, the NEA now requires you to respond to a contextual challenge set by the exam board, and the written exam is worth 50% of your grade. There is also a greater emphasis on maths and science skills, which are integrated into the exam questions.
    How much of the Eduqas D&T GCSE is coursework?
    The non-examined assessment (NEA) is worth 50% of your final grade, which is equivalent to half of the qualification. This is a substantial design-and-make project where you produce a portfolio and a prototype. The other 50% comes from a single written exam at the end of the course. This balance means you need to be strong in both practical and theoretical work.
    What materials and tools will I need for the Eduqas D&T NEA?
    For the NEA, you will need access to a range of materials and tools, but the specific ones depend on your chosen project. Typically, you will use timbers, metals, polymers, or textiles, along with hand tools, machines, and possibly CAD/CAM software. Your school will provide most of the equipment, but you may need to purchase some materials for your final prototype. It's best to check with your teacher for the exact requirements.
    Is the Eduqas D&T GCSE exam open book or closed book?
    The Eduqas GCSE Design and Technology written exam is a closed-book exam, meaning you cannot take any notes or reference materials into the exam hall. You will need to memorise key facts, formulas, and design principles. However, you will be provided with a formula sheet for some maths-based questions, and you can use a calculator. The exam tests your ability to recall and apply knowledge under timed conditions.
    Can I take Eduqas GCSE D&T if I haven't studied it before?
    Yes, you can take the Eduqas GCSE Design and Technology even if you haven't studied D&T at Key Stage 3, but it is helpful to have some basic knowledge. The course is designed to build on your everyday experiences and teaches you everything from scratch. However, you will need to be willing to learn practical skills and theory. If you have a strong interest in design, making, and problem-solving, you can succeed regardless of your previous experience.
    Assessment and exam guidance

    What Gets Top Grades

    A*/Grade 9

    Knowledge & Understanding

    Demonstrates comprehensive and accurate knowledge

    • Uses correct subject-specific terminology
    • Shows detailed understanding of concepts
    • Makes accurate connections between topics
    • Demonstrates depth beyond surface-level knowledge

    Application

    Applies knowledge effectively to new contexts

    • Selects relevant knowledge for the question
    • Adapts understanding to unfamiliar scenarios
    • Uses examples appropriately
    • Shows awareness of context

    Analysis & Evaluation

    Develops sophisticated analytical arguments

    • Constructs logical chains of reasoning
    • Considers multiple perspectives
    • Weighs evidence to reach justified conclusions
    • Acknowledges limitations and nuances

    Key Command Words

    Eduqas
    State
    1 mark

    Give a single fact or term

    Identify
    1 mark

    Name, select, or recognise

    Outline
    2 marks

    Set out main features briefly

    Describe
    2-4 marks

    Give an account of what something is like or what happens

    Explain
    3-6 marks

    Give reasons with developed cause→effect chains

    Compare
    2-4 marks

    State similarities AND differences (both required)

    Analyse
    6-9 marks

    Examine in detail showing cause→effect→consequence chains

    Evaluate
    6-12 marks

    Weigh up BOTH sides, reach JUSTIFIED conclusion

    Assess
    6-12 marks

    Make judgments about importance with justification

    Calculate
    2-4 marks

    Show formula→substitution→calculation→answer with units

    Tips and common mistakes

    Common Exam Mistakes

    Pitfalls to avoid in your exams

    • •Confusing the difference between blended fibres and mixed fibres
    • •Failing to link specific fibre properties to the functional requirements of a product
    • •Misidentifying the construction method (e.g., confusing knitting with weaving)
    • •Overlooking the importance of finishing processes in improving the functionality of a textile product
    • •Neglecting the environmental impact of textile processing and waste
    • •Confusing the properties of ferrous and non-ferrous metals.
    • •Failing to link material selection to functional and aesthetic requirements.
    • •Neglecting the environmental impact of mining and production in life-cycle analysis.

    Top Examiner Tips

    Expert advice for exam success

    • •Ensure you can distinguish between the properties of thermoforming and thermosetting plastics when discussing how they react to stress.
    • •Relate the choice of reinforcement (e.g., fibres in thermosetting plastics) to the specific functional requirements of the product.
    • •Be prepared to justify the selection of a specific fibre or fabric based on its physical and working properties for a given design context
    • •Use correct terminology when describing construction methods (e.g., warp and weft for knitting)
    • •Link the choice of textile to the 'Six R's' of sustainability and life-cycle analysis
    • •Ensure you can explain how blending or mixing fibres creates a material with superior properties compared to the individual components
    • •Relate textile choices to the specific needs of the user, such as active sportswear or all-weather wear
    • •Ensure you can distinguish between the mechanical properties (e.g., toughness vs. hardness) and physical properties (e.g., conductivity).

    Ready for a little practice?

    Create your account to start practising Design and Technology.

    Start free

    A week of Premium from your first lesson · Then the free plan continues · No card, no charge